About Citations:


Some Citations of My Papers (before 2016):


The paper R.-E. Precup, St. Preitl, J. K. Tar, M. L. Tomescu, M. Takács, P. Korondi and P. Baranyi, Fuzzy Control System Performance Enhancement by Iterative Learning Control, IEEE Transactions on Industrial Electronics, vol. 55, no. 9, pp. 3461-3475, 2008, impact factor (IF) = 5.468, IF according to 2014 Journal Citation Reports (JCR) released by Clarivate Analytics in 2015 = 6.498 (ieeexplore.ieee.org) is cited in:


The paper St. Preitl and R.-E. Precup, An Extension of Tuning Relations after Symmetrical Optimum Method for PI and PID Controllers, Automatica (Elsevier Science), vol. 35, no. 10, pp. 1731-1736, 1999, impact factor (IF) = 0.911, IF according to 2013 Journal Citation Reports (JCR) released by Clarivate Analytics in 2014 = 3.132 (www.sciencedirect.com) is cited in:


The paper R.-E. Precup and St. Preitl, PI-Fuzzy Controllers for Integral Plants to Ensure Robust Stability, Information Sciences (Elsevier Science), vol. 177, no. 20, pp. 4410-4429, 2007, impact factor (IF) = 2.147, IF according to 2013 Journal Citation Reports (JCR) released by Clarivate Analytics in 2014 = 3.893 (www.sciencedirect.com, dl.acm.org) is cited in:


The paper R.-E. Precup, S. Doboli and St. Preitl, Stability Analysis and Development of a Class of Fuzzy Control Systems, Engineering Applications of Artificial Intelligence (Elsevier Science), vol. 13, no. 3, pp. 237-247, 2000, impact factor (IF) = 0.231, IF according to 2013 Journal Citation Reports (JCR) released by Clarivate Analytics in 2014 = 1.962 (www.sciencedirect.com) is cited in:


The paper R.-E. Precup, St. Preitl, I. J. Rudas, M. L. Tomescu and J. K. Tar, Design and Experiments for a Class of Fuzzy Controlled Servo Systems, IEEE/ASME Transactions on Mechatronics, vol. 13, no. 1, pp. 22-35, 2008, impact factor (IF) = 1.614, IF according to 2014 Journal Citation Reports (JCR) released by Clarivate Analytics in 2015 = 3.427 (ieeexplore.ieee.org) is cited in:


The paper R.-E. Precup, St. Preitl and P. Korondi, Fuzzy Controllers with Maximum Sensitivity for Servosystems, IEEE Transactions on Industrial Electronics, vol. 54, no. 3, pp. 1298-1310, 2007, impact factor (IF) = 2.216, IF according to 2014 Journal Citation Reports (JCR) released by Clarivate Analytics in 2015 = 6.498 (ieeexplore.ieee.org) is cited in:


The paper R.-E. Precup, St. Preitl and G. Faur, PI Predictive Fuzzy Controllers for Electrical Drive Speed Control: Methods and Software for Stable Development, Computers in Industry (Elsevier Science), vol. 52, no. 3, pp. 253-270, 2003, impact factor (IF) = 0.692, IF according to 2013 Journal Citation Reports (JCR) released by Clarivate Analytics in 2014 = 1.457 (www.sciencedirect.com, dl.acm.org) is cited in:


The paper R.-E. Precup and St. Preitl, Optimisation Criteria in Development of Fuzzy Controllers with Dynamics, Engineering Applications of Artificial Intelligence (Elsevier Science), vol. 17, no. 6, pp. 661-674, 2004, impact factor (IF) = 0.421, IF according to 2013 Journal Citation Reports (JCR) released by Clarivate Analytics in 2014 = 1.962 (www.sciencedirect.com, dl.acm.org) is cited in:


The paper Cl. Pozna, F. Troester, R.-E. Precup, J. K. Tar and St. Preitl, On the Design of an Obstacle Avoiding Trajectory: Method and Simulation, Mathematics and Computers in Simulation (Elsevier Science), vol. 79, no. 7, pp. 2211-2226, 2009, impact factor (IF) = 0.946, IF according to 2014 Journal Citation Reports (JCR) released by Clarivate Analytics in 2015 = 0.949 (www.sciencedirect.com, dl.acm.org) is cited in:


The paper R.-E. Precup and H. Hellendoorn, A survey on industrial applications of fuzzy control, Computers in Industry (Elsevier Science), vol. 62, no. 3, pp. 213-226, 2011, impact factor (IF) = 1.529, IF according to 2014 Journal Citation Reports (JCR) released by Thomson Reuters in 2015 = 1.287 (www.sciencedirect.com, dl.acm.org) is cited in:


The paper R.-E. Precup, St. Preitl, E. M. Petriu, J. K. Tar, M. L. Tomescu and Cl. Pozna, Generic two-degree-of-freedom linear and fuzzy controllers for integral processes, Journal of The Franklin Institute (Elsevier Science), vol. 346, no. 10, pp. 980-1003, 2009, impact factor (IF) = 1.130, IF according to 2014 Journal Citation Reports (JCR) released by Clarivate Analytics in 2015 = 2.395 (www.sciencedirect.com) is cited in:


The paper Cl. Pozna, R.-E. Precup, J. K. Tar, I. Škrjanc and St. Preitl, New results in modelling derived from Bayesian filtering, Knowledge-Based Systems (Elsevier Science), vol. 23, no. 2, pp. 182-194, 2010, impact factor (IF) = 1.574, IF according to 2014 Journal Citation Reports (JCR) released by Clarivate Analytics in 2015 = 2.947 (www.sciencedirect.com) is cited in:


The paper R.-E. Precup, St. Preitl, M.-B. Rădac, E. M. Petriu, C.-A. Dragoş and J. K. Tar, Experiment-based teaching in advanced control engineering, IEEE Transactions on Education, vol. 54, no. 3, pp. 345-355, 2011, impact factor (IF) = 1.021, IF according to 2014 Journal Citation Reports (JCR) released by Clarivate Analytics in 2015 = 0.842 (ieeexplore.ieee.org) is cited in:


The paper R.-E. Precup, R.-C. David, E. M. Petriu, St. Preitl and M.-B. Rădac, Fuzzy control systems with reduced parametric sensitivity based on simulated annealing, IEEE Transactions on Industrial Electronics, vol. 59, no. 8, pp. 3049-3061, 2012, impact factor (IF) = 5.165, IF according to 2014 Journal Citation Reports (JCR) released by Clarivate Analytics in 2015 = 6.498 (ieeexplore.ieee.org) is cited in:


The paper M.-B. Rădac, R.-E. Precup, E. M. Petriu and St. Preitl, Application of IFT and SPSA to servo system control, IEEE Transactions on Neural Networks, vol. 22, no. 12, part 2, pp. 2363-2375, 2011, impact factor (IF) = 2.952, IF according to 2013 Journal Citation Reports (JCR) released by Clarivate Analytics in 2014 = 4.370 (IEEE Transactions on Neural Networks and Learning Systems starting with 2012) (ieeexplore.ieee.org) is cited in:


The paper R.-E. Precup and St. Preitl, Popov-type Stability Analysis Method for Fuzzy Control Systems, Proceedings of Fifth European Congress on Intelligent Technologies and Soft Computing EUFIT'97, H.-J. Zimmermann, Ed., Verlag Mainz, Aachen, Germany, vol. 2, pp. 1306-1310, 1997 (www.eufit.org) is cited in:


The paper R.-E. Precup and St. Preitl, PI and PID controllers tuning for integral-type servo systems to ensure robust stability and controller robustness, Electrical Engineering (Springer-Verlag), vol. 88, no. 2, pp. 149-156, 2006, impact factor (IF) = 0.068, IF according to 2013 Journal Citation Reports (JCR) released by Clarivate Analytics in 2014 = 0.347 (link.springer.com) is cited in:


The paper R.-E. Precup, M. L. Tomescu and St. Preitl, Lorenz System Stabilization Using Fuzzy Controllers, International Journal of Computers, Communications & Control (Agora University, CCC Publishing, EBSCO Publishing), vol. II, no. 3, pp. 279-287, 2007, impact factor (IF) = 0.000, IF according to 2013 Journal Citation Reports (JCR) released by Clarivate Analytics in 2014 = 0.694 (journal.univagora.ro) is cited in:


The paper R.-E. Precup, R.-C. David, E. M. Petriu, M.-B. Rădac, St. Preitl and J. Fodor, Evolutionary optimization-based tuning of low-cost fuzzy controllers for servo systems, Knowledge-Based Systems (Elsevier Science), vol. 38, pp. 74-84, 2013, impact factor (IF) = 3.058, IF according to 2013 Journal Citation Reports (JCR) released by Clarivate Analytics in 2014 = 3.058 (www.sciencedirect.com, dl.acm.org) is cited in:


The paper R.-E. Precup, R.-C. David, E. M. Petriu, St. Preitl and M.-B. Rădac, Novel adaptive gravitational search algorithm for fuzzy controlled servo systems, IEEE Transactions on Industrial Informatics, vol. 8, no. 4, pp. 791-800, 2012, impact factor (IF) = 3.381, IF according to 2013 Journal Citation Reports (JCR) released by Clarivate Analytics in 2014 = 8.785 (ieeexplore.ieee.org) is cited in:


The book chapter R.-E. Precup, R.-C. David, E. M. Petriu, St. Preitl and A. S. Paul, Gravitational Search Algorithm-Based Tuning of Fuzzy Control Systems with a Reduced Parametric Sensitivity, in: Soft Computing in Industrial Applications, A. Gaspar-Cunha, R. Takahashi, G. Schaefer and L. Costa, Eds., Advances in Intelligent and Soft Computing, vol. 96 (Springer-Verlag), pp. 141-150, 2011 (link.springer.com, link.springer.com) is cited in:


The paper M.-L. Tomescu, St. Preitl, R.-E. Precup and J. K. Tar, Stability Analysis Method for Fuzzy Control Systems Dedicated Controlling Nonlinear Processes, Acta Polytechnica Hungarica (Óbuda University), vol. 4, no. 3, pp. 127-141, 2007 (uni-obuda.hu/journal/) is cited in:


The paper R.-E. Precup, M. L. Tomescu, St. Preitl and E. M. Petriu, Fuzzy Logic-based Stabilization of Nonlinear Time-varying Systems, International Journal of Artificial Intelligence (CESER Publications), vol. 3, no. A09, pp. 24-36, 2009 (www.ceser.in) is cited in:


The paper St. Preitl, R.-E. Precup, J. Fodor and B. Bede, Iterative Feedback Tuning in Fuzzy Control Systems. Theory and Applications, Acta Polytechnica Hungarica (Óbuda University), vol. 3, no. 3, pp. 81-96, 2006 (uni-obuda.hu/journal/) is cited in:


The paper J. K. Tar, J. F. Bito, St. Preitl and R.-E. Precup, The Effect of the Static Striebeck Friction in the Robust VS / Sliding Mode Control of a Ball-Beam System, Proceedings of 15th International Workshop on Robotics in Alpe-Adria-Danube Region RAAD 2006, Balatonfüred, Hungary, CD-ROM, paper index 5, 6 pp., 2006 (www.bmf.hu/conferences/raad2006/) is cited in:


The book chapter R.-E. Precup and St. Preitl, On the Stability and Sensitivity Analysis of Fuzzy Control Systems for Servo-Systems, in: Fuzzy Systems Engineering, Theory and Practice, N. Nedjah and L. de Macedo Mourelle, Eds., Studies in Fuzziness and Soft Computing, vol. 181 (Springer-Verlag), pp. 131-161, 2005 (link.springer.com, www.springer.com) is cited in:


The paper R.-E. Precup, Zs. Preitl and St. Kilyeni, Fuzzy Control Solution for Hydro Turbine Generators, Proceedings of 2005 IEEE International Conference on Control and Automation ICCA 2005, Budapest, Hungary, vol. 1, pp. 83-88, 2005 (ieeexplore.ieee.org) is cited in:


The paper R.-E. Precup, St. Preitl and St. Solyom, Center Manifold Theory Approach to the Stability Analysis of Fuzzy Control Systems, in: Computational Intelligence. Theory and Applications, Lecture Notes in Computer Science, vol. 1625, B. Reusch, Ed. (Springer-Verlag), pp. 382-390, 1999 (link.springer.com, dl.acm.org) is cited in:


The paper R.-E. Precup, St. Preitl, J. Fodor, I.-B. Ursache, P. A. Clep and St. Kilyeni, Experimental Validation of Iterative Feedback Tuning Solutions for Inverted Pendulum Crane Mode Control (Best Paper Award in the Area of Intelligent Control), Proceedings of 2008 Conference on Human System Interaction HSI 2008, Krakow, Poland, pp. 536-541, 2008 (ieeexplore.ieee.org) is cited in:


The paper R.-E. Precup, St. Preitl, M. L. Tomescu, E. M. Petriu, J. K. Tar and C. Bărbulescu, Stable Iterative Feedback Tuning-based Design of Takagi-Sugeno PI-Fuzzy Controllers (Best Paper Award in the Area of Intelligent Control), Proceedings of 2008 Conference on Human System Interaction HSI 2008, Krakow, Poland, pp. 542-547, 2008 (ieeexplore.ieee.org) is cited in:


The paper R.-E. Precup, L.-T. Dioanca, E. M. Petriu, M.-B. Rădac, St. Preitl and C.-A. Dragoş, Tensor Product-Based Real-time Control of the Liquid Levels in a Three Tank System, Proceedings of 2010 IEEE/ASME International Conference on Advanced Intelligent Mechatronics AIM 2010, Montreal, Canada, pp. 768-773, 2010 (ieeexplore.ieee.org) is cited in:


The paper R.-E. Precup, Zs. Preitl and E. M. Petriu, Delta Domain Design of Low-Cost Fuzzy Controlled Servosystems, Proceedings of 2007 IEEE International Symposium on Intelligent Signal Processing WISP 2007, Alcala de Henares (Madrid), Spain CD-ROM, paper index 884, 6 pp., 2007 (ieeexplore.ieee.org) is cited in:


The paper R.-E. Precup, W. S. Lee, M. V. C. Rao and Zs. Preitl, Linear and fuzzy control solutions for tape drives, Electrical Engineering (Springer-Verlag), vol. 90, no. 5, pp. 361-377, 2008, impact factor (IF) = 0.378, IF according to 2013 Journal Citation Reports (JCR) released by Clarivate Analytics in 2014 = 0.347 (link.springer.com) is cited in:


The paper R.-E. Precup, M. L. Tomescu, St. Preitl and I. Škrjanc, Stable Fuzzy Logic Control Solution for Lorenz Chaotic System Stabilization, International Journal of Artificial Intelligence (CESER Publications), vol. 1, no. A08, pp. 23-33, 2008 (www.ceser.in) is cited in:


The paper R.-E. Precup, Zs. Preitl and St. Preitl, Iterative Feedback Tuning Approach to Development of PI-Fuzzy Controllers, Proceedings of 2007 IEEE International Conference on Fuzzy Systems FUZZ-IEEE 2007, London, UK, pp. 199-204, 2007 (ieeexplore.ieee.org) is cited in:


The paper R.-E. Precup, St. Preitl, I. J. Rudas and J. K. Tar, On the Use of Iterative Learning Control in Fuzzy Control System Structures, Proceedings of 7th International Symposium of Hungarian Researchers on Computational Intelligence, Budapest, Hungary, pp. 69-82, 2006 (conf.uni-obuda.hu/huci2006/) is cited in:


The paper Zs. Preitl, R.-E. Precup, J. K. Tar and M. Takács, Use of Multi-parametric Quadratic Programming in Fuzzy Control Systems, Acta Polytechnica Hungarica (Óbuda University), vol. 3, no. 3, pp. 29-43, 2006 (uni-obuda.hu/journal/) is cited in:


The paper R.-E. Precup, Zs. Preitl, St. Preitl, S. Vaivoda, J. K. Tar and M. Takács, Two-Degree-Of-Freedom Fuzzy Control in Decentralized Trajectory Tracking, Proceedings of 4th International Symposium on Applied Computational Intelligence and Informatics SACI '07, Timisoara (Romania), pp. 93-98, 2007 (ieeexplore.ieee.org) is cited in:


The paper R.-E. Precup and St. Preitl, On a Class of Control Systems with Takagi-Sugeno PI-Fuzzy Controllers, Proceedings of 2nd Romanian-Hungarian Joint Symposium on Applied Computational Intelligence SACI 2005, Timisoara (Romania), pp. 45-58, 2005 (bmf.hu/conferences/saci2005/) is cited in:


The paper Cl. Pozna, V. Prahovean and R.-E. Precup, A New Pattern of Knowledge Based on Experimenting the Causality Relation, Proceedings of 14th International Conference on Intelligent Engineering Systems INES 2010, Las Palmas of Gran Canaria, Spain, pp. 61-66, 2010 (ieeexplore.ieee.org, dl.acm.org) is cited in:


The paper Cl. Pozna, R.-E. Precup, N. Minculete, Cs. Antonya and C.-A. Dragoş, Properties of Classes, Subclasses and Objects in an Abstraction Model, Proceedings of 19th International Workshop on Robotics in Alpe-Adria-Danube Region RAAD 2010, Budapest, Hungary, pp. 291-296, 2010 (ieeexplore.ieee.org) is cited in:


The paper R.-E. Precup and St. Preitl, Fuzzy Logic Decision Rules in Two Input-Single Output Linear Time-varying Systems Control, Proceedings of 1st Romanian-Hungarian Joint Symposium on Applied Computational Intelligence SACI 2004, Timisoara (Romania), pp. 69-78, 2004 (conf.uni-obuda.hu/saci04/) is cited in:


The paper R.-E. Precup, St. Preitl, M. Balas and V. Balas, Fuzzy Controllers for Tire Slip Control in Anti-lock Braking Systems, Proceedings of IEEE International Conference on Fuzzy Systems FUZZ-IEEE 2004, Budapest, Hungary, pp. 1317-1322, 2004 (ieeexplore.ieee.org) is cited in:


The paper St. Preitl, R.-E. Precup, St. Solyom and L. Kovacs, Development of Conventional and Fuzzy Controllers for Output Coupled Drive Systems and Variable Inertia, Preprints of 6th IFAC / IFORS / IMACS / IFIP Symposium on Large Scale Systems: Theory and Applications LSS2001, Bucharest (Romania), pp. 267-274, 2001 (www.ifac-control.org/events/past) is cited in:


The book R.-E. Precup and St. Preitl, Fuzzy Controllers (in English), Editura Orizonturi Universitare Publishers, Timisoara, 212 pp., 1999 is cited in:


The paper R.-E. Precup and St. Preitl, On a Fuzzy Digital PID Predictor Controller, Proceedings of Second IEEE Mediterranean Symposium on New Directions in Control and Automation, Chania, Crete, Greece, pp. 569-573, 1994 (med.ee.nd.edu/MED2-1994/) is cited in:


The paper R.-E. Precup and St. Preitl, Stability Analysis of Minimum- and Nonminimum- Phased Fuzzy Control Systems, Proceedings of Fourth European Congress on Intelligent Technologies and Soft Computing EUFIT'96, H.-J. Zimmermann, Ed. (Verlag Mainz), Aachen, Germany, vol. 2, pp. 1065-1069, 1996 (www.eufit.org) is cited in:


The paper C.-A. Dragoş, St. Preitl, R.-E. Precup and E. M. Petriu, Magnetic Levitation System Laboratory-based Education in Control Engineering, Proceedings of 3rd International Conference on Human System Interaction HSI 2010, Rzeszow, Poland, pp. 496-501, 2010 (ieeexplore.ieee.org) is cited in:


The paper St. Preitl, R.-E. Precup, P. A. Clep, I.-B. Ursache, J. Fodor and I. Škrjanc, Pole Placement Approaches for Linear and Fuzzy Systems, Proceedings of 6th International Symposium on Intelligent Systems and Informatics SISY 2008, Subotica, Serbia, CD-ROM, paper index 77, 6 pp., 2008 (ieeexplore.ieee.org) is cited in:


The paper R.-E. Precup and St. Preitl, Stability and Sensitivity Analysis of Fuzzy Control Systems. Mechatronics Applications, Acta Polytechnica Hungarica (Óbuda University), vol. 3, no. 1, pp. 61-76, 2006 (uni-obuda.hu/journal/) is cited in:


The paper M. Stan, R.-E. Precup and A. S. Paul, Analysis of Fuzzy Control Solutions for Anti-Lock Braking Systems, Control Engineering and Applied Informatics (Romanian Society of Control Engineering and Technical Informatics), vol. 9, no. 2, pp. 11-22, 2007 (www.ceai.srait.ro) is cited in:


The paper R.-E. Precup, M. L. Tomescu, St. Preitl, J. K. Tar and A. S. Paul, Stability Analysis Approach for Fuzzy Logic Control Systems with Mamdani Type Fuzzy Logic Controllers, Control Engineering and Applied Informatics (Romanian Society of Control Engineering and Technical Informatics), vol. 9, no. 1, pp. 3-10, 2007 (www.ceai.srait.ro) is cited in:


The book St. Preitl and R.-E. Precup, Introduction to Fuzzy Control (in Romanian: Introducere in conducerea fuzzy a proceselor), Editura Tehnica Publishers, Bucharest, 151 pp., 1997 is cited in:


The paper Cl. Pozna and R.-E. Precup, Plausible Reasoning in Modular Robotics and Human Reasoning, Acta Polytechnica Hungarica (Óbuda University), vol. 4, no. 4, pp. 133-147, 2007 (uni-obuda.hu/journal/) is cited in:


The paper R.-E. Precup, St. Preitl, J. K. Tar, J. Fodor, I.-B. Ursache and P. A. Clep, Low-Cost Fuzzy Logic Approach to Ship Course Control, Proceedings of 50th International Symposium ELMAR-2008, Zadar, Croatia, vol. 2, pp. 423-426, 2008 (ieeexplore.ieee.org) is cited in:


The paper St. Preitl and R.-E. Precup, Points of View in Controller Design by Means of Extended Symmetrical Optimum Method, in: Control Systems Design 2003 (CSD '03), S. Kozak and M. Huba, Eds. (Elsevier), pp. 95-100, 2004 (books.google.ro) is cited in:


The paper St. Preitl and R.-E. Precup, Extended Symmetrical Optimum (ESO) Method: A New Tuning Strategy for PI/PID Controllers, Preprints of IFAC Workshop on Digital Control: Past, Present and Future of PID Control, J. Quevedo and T. Escobet, Eds., Terrassa, Spain, pp. 421-426, 2000 is cited in:


The paper R.-E. Precup, St. Preitl, St. Kilyeni, Zs. Preitl and C. Bărbulescu, Fuzzy Control Systems Dedicated to Electro-hydraulic Servo-systems. IFT Techniques and Sensitivity Analysis, Proceedings of IEEE Region 8 EUROCON 2007 Computer as a Tool Conference, Warsaw, Poland, pp. 1409-1416, 2007 (ieeexplore.ieee.org) is cited in:


The paper R.-E. Precup, St. Preitl, St. Kilyeni, J. K. Tar and B. Luştrea, Iterative Learning Control Approach to Fuzzy Control Systems Development, Proceedings of IEEE Region 8 EUROCON 2007 Computer as a Tool Conference, Warsaw, Poland, pp. 692-697, 2007 (ieeexplore.ieee.org) is cited in:


The paper R.-E. Precup, M. L. Tomescu, St. Preitl, E. M. Petriu, St. Kilyeni and C. Bărbulescu, Stability Analysis Approach to a Class of Fuzzy Controlled Nonlinear Time-varying Systems, Proceedings of IEEE Region 8 EUROCON 2009 Conference, Saint-Petersburg, Russia, pp. 958-963, 2009 (ieeexplore.ieee.org) is cited in:


The paper Cl. Pozna and R.-E. Precup, Using Plausible Reasoning in Modular Robots Kinematics, Proceedings of 12th International Conference on Intelligent Engineering Systems INES 2008, Miami, FL, USA, pp. 243-248, 2008 (ieeexplore.ieee.org) is cited in:


The paper T. Haidegger, L. Kovács, St. Preitl, R.-E. Precup, B. Benyó and Z. Benyó, Controller design solutions for long distance telesurgical applications, International Journal of Artificial Intelligence (CESER Publications), vol. 6, no. S11, pp. 48-71, 2011 (www.ceser.in) is cited in:


The paper R.-E. Precup, M. L. Tomescu, St. Preitl and E. M. Petriu, Fuzzy logic-based stabilization of a magnetic ball suspension system, International Journal of Artificial Intelligence (CESER Publications), vol. 5, no. A10, pp. 56-66, 2010 (www.ceser.in) is cited in:


The paper R.-E. Precup, St. Preitl, E. M. Petriu, J. K. Tar and J. Fodor, Iterative Learning-Based Fuzzy Control System, Proceedings of IEEE International Workshop on Robotic and Sensors Environments ROSE 2008, Ottawa, ON, Canada, pp. 25-28, 2008 (ieeexplore.ieee.org) is cited in:


The paper R.-E. Precup and St. Preitl, Development Method for Low Cost Fuzzy Controlled Servosystems, Proceedings of 2006 IEEE International Symposium on Intelligent Control ISIC, Munchen, Germany, pp. 2707-2712, 2006 (ieeexplore.ieee.org) is cited in:


The paper R.-E. Precup, M. L. Tomescu and St. Preitl, Fuzzy Logic Control System Stability Analysis Based on Lyapunov's Direct Method, International Journal of Computers, Communications & Control (Agora University Editing House - CCC Publications), vol. IV, no. 4, pp. 415-426, 2009, impact factor (IF) = 0.373, IF according to 2013 Journal Citation Reports (JCR) released by Clarivate Analytics in 2014 = 0.694 (journal.univagora.ro) is cited in:


The paper St. Preitl and R.-E. Precup, On the algorithmic design of a class of control systems based on providing the symmetry of open-loop Bode plots, Buletinul Stiintific al U.P.T., Transactions on Automatic Control and Computer Science, vol. 41 (55), no. 1-2, pp. 47-55, 1996 is cited in:


The paper St. Preitl and R.-E. Precup, PI controller design for speed control of DC drives with variable moment of inertia, Buletinul Stiintific al U.P.T., Transactions on Automatic Control and Computer Science, vol. 42 (56), no. 1-2, pp. 97-102, 1997 is cited in:


The paper R.-E. Precup, J. Gati, G. Kartyas and St. Preitl, Object description based processes for higher education in global computer networks, Proceedings of 4th International Symposium on Applied Computational Intelligence and Informatics SACI '07, Timisoara, Romania, pp. 153-156, 2007 (ieeexplore.ieee.org) is cited in:


The paper R.-E. Precup, I. Moşincat, M.-B. Rădac, St. Preitl, St. Kilyeni, E. M. Petriu and C.-A. Dragoş, Experiments in Iterative Feedback Tuning for Level Control of Three-Tank System, Proceedings of 15th IEEE Mediterranean Electromechanical Conference MELECON 2010, Valletta, Malta, pp. 564-569, 2010 (ieeexplore.ieee.org) is cited in:


The paper C.-A. Dragoş, St. Preitl, R.-E. Precup, D. Pîrlea, C.-S. Neş, E. M. Petriu and Cl. Pozna, Modeling of a Vehicle with Continuously Variable Transmission, Proceedings of 19th International Workshop on Robotics in Alpe-Adria-Danube Region RAAD 2010, Budapest, Hungary, pp. 441-446, 2010 (ieeexplore.ieee.org) is cited in:


The paper R.-E. Precup, R.-C. David, E. M. Petriu, St. Preitl and M.-B. Rădac, Gravitational Search Algorithms in Fuzzy Control Systems Tuning, Proceedings of 18th IFAC World Congress, Milano, Italy, pp. 13624-13629, 2011 (www.ifac-papersonline.net, www.nt.ntnu.no/users/skoge/) is cited in:


The paper R.-E. Precup, M.-L. Tomescu, E. M. Petriu and L.-E. Dragomir, Stable fuzzy logic control of generalized van der Pol oscillator, International Journal of Artificial Intelligence (CESER Publications), vol. 7, no. A11, pp. 36-46, 2011 (www.ceser.in) is cited in:


The paper T. Haidegger, L. Kovács, R.-E. Precup, B. Benyó, Z. Benyó and St. Preitl, Simulation and control for telerobots in space medicine, Acta Astronautica (Elsevier Science), vol. 181, no. 1, pp. 390-402, 2012, impact factor (IF) = 0.701, IF according to 2013 Journal Citation Reports (JCR) released by Clarivate Analytics in 2014 = 0.816 (www.sciencedirect.com) is cited in:


The paper St. Preitl, R.-E. Precup and Zs. Preitl, Development of Conventional and Fuzzy Controllers and Takagi-Sugeno Fuzzy Models Dedicated for Control of Low Order Benchmarks with Time Variable Parameters, Acta Polytechnica Hungarica (Óbuda University), vol. 2, no. 1, pp. 75-92, 2005 (uni-obuda.hu/journal/) is cited in:


The paper R.-E. Precup, M.-B. Rădac, M. L. Tomescu, E. M. Petriu and St. Preitl, Stable and convergent iterative feedback tuning of fuzzy controllers for discrete-time SISO systems, Expert Systems with Applications (Elsevier Science), vol. 40, no. 1, pp. 188-199, 2013, impact factor (IF) = 1.965, IF according to 2013 Journal Citation Reports (JCR) released by Clarivate Analytics in 2014 = 1.965 (www.sciencedirect.com, dl.acm.org) is cited in:


The paper Cl. Pozna, N. Minculete, R.-E. Precup, L. T. Kóczy and Á. Ballagi, Signatures: Definitions, operators and applications to fuzzy modeling, Fuzzy Sets and Systems (Elsevier Science), vol. 201, pp. 86-104, 2012, impact factor (IF) = 1.749, IF according to 2013 Journal Citation Reports (JCR) released by Clarivate Analytics in 2014 = 1.880 (www.sciencedirect.com) is cited in:


The paper R.-E. Precup, M. L. Tomescu, M.-B. Rădac, E. M. Petriu, St. Preitl and C.-A. Dragoş, Iterative performance improvement of fuzzy control systems for three tank systems, Expert Systems with Applications (Elsevier Science), vol. 39, no. 9, pp. 8288-8299, 2012, impact factor (IF) = 1.854, IF according to 2013 Journal Citation Reports (JCR) released by Clarivate Analytics in 2014 = 1.965 (www.sciencedirect.com) is cited in:


The paper J. K. Tar, J. F. Bito, I. J. Rudas, St. Preitl and R.-E. Precup, An SVD based modification of the adaptive inverse dynamics controller, Proceedings of 5th International Symposium on Applied Computational Intelligence and Informatics SACI 2009, Timisoara, Romania, pp. 193-198, 2009 (ieeexplore.ieee.org) is cited in:


The paper Cl. Pozna and R.-E. Precup, Modeling Derived from Bayesian Filtering: Analysis of Estimation Process, Proceedings of 13th International Conference on Intelligent Engineering Systems INES 2009, Barbados, pp. 73-78, 2009 (ieeexplore.ieee.org, dl.acm.org) is cited in:


The paper R.-E. Precup, C. Gavriluţă, M.-B. Rădac, St. Preitl, C.-A. Dragoş, J. K. Tar and E. M. Petriu, Iterative Learning Control Experimental Results for Inverted Pendulum Crane Mode Control, Proceedings of 7th International Symposium on Intelligent Systems and Informatics SISY 2009, Subotica, Serbia, pp. 323-328, 2009 (ieeexplore.ieee.org) is cited in:


The paper St. Preitl, R.-E. Precup and Zs. Preitl, Case Studies in Teaching Fuzzy and Advanced Control Strategies, Proceedings of 8th International Symposium of Hungarian Researchers on Computational Intelligence and Informatics CINTI 2007, Budapest, Hungary, pp. 457-473, 2007 (www.bmf.hu/conferences/cinti2007/) is cited in:


The paper R.-E. Precup, S. V. Spătaru, E. M. Petriu, St. Preitl, M.-B. Rădac and C.-A. Dragoş, Stable and Optimal Fuzzy Control of a Laboratory Antilock Braking System, Proceedings of 2010 IEEE/ASME International Conference on Advanced Intelligent Mechatronics AIM 2010, Montreal, Canada, pp. 593-598, 2010 (ieeexplore.ieee.org) is cited in:


The paper C.-A. Dragoş, R.-E. Precup, St. Preitl, E. M. Petriu and A.-I. Stînean, Takagi-Sugeno fuzzy control solutions for mechatronic applications, International Journal of Artificial Intelligence (CESER Publications), vol. 8, no. S12, pp. 45-65, 2012 (www.ceser.in) is cited in:


The paper R.-C. David, C.-A. Dragoş, R.-G. Bulzan, R.-E. Precup, E. M. Petriu and M.-B. Rădac, An approach to fuzzy modeling of magnetic levitation systems, International Journal of Artificial Intelligence (CESER Publications), vol. 9, no. A12, pp. 1-18, 2012 (www.ceser.in) is cited in:


The paper R.-E. Precup, C.-A. Dragoş, St. Preitl, M.-B. Rădac and E. M. Petriu, Novel tensor product models for automatic transmission system control, IEEE Systems Journal, vol. 6, no. 3, pp. 488-498, 2012, impact factor (IF) = 1.270, IF according to 2013 Journal Citation Reports (JCR) released by Clarivate Analytics in 2014 = 1.746 (ieeexplore.ieee.org) is cited in:


The book chapter M.-B. Rădac, R.-E. Precup, E. M. Petriu, St. Preitl and C.-A. Dragoş, Convergent Iterative Feedback Tuning of State Feedback-Controlled Servo Systems, in: Informatics in Control Automation and Robotics, J. Andrade Cetto, J. Filipe and J.-L. Ferrier, Eds., Lecture Notes in Electrical Engineering, vol. 85 (Springer-Verlag), pp. 99-111, 2011 (link.springer.com, link.springer.com) is cited in:


The paper R.-E. Precup, R.-C. David, St. Preitl and E. M. Petriu, Design aspects of optimal PI controllers with reduced sensitivity for a class of servo systems using PSO algorithms, Facta Universitatis, Series Automatic Control and Robotics (University of Nis), vol. 8, no. 1, pp. 1-12, 2009 (facta.junis.ni.ac.rs/acar/) is cited in:


The paper R.-E. Precup, S. V. Spătaru, M.-B. Rădac, E. M. Petriu, St. Preitl and C.-A. Dragoş, Model-based Fuzzy Control Solutions for a Laboratory Antilock Braking System, Proceedings of 3rd International Conference on Human System Interaction HSI 2010, Rzeszow, Poland, pp. 133-138, 2010 (ieeexplore.ieee.org) is cited in:


The book St. Preitl and R.-E. Precup, Elements of Automatic Control. Applications to Voltage and Speed Control Systems of Synchronous Generators (in Romanian: Elemente de reglare automata. Aplicatii la sistemele de reglare automata a excitatiei si vitezei generatoarelor sincrone), Editura Orizonturi Universitare Publishers, Timisoara, 304 pp., 2005 is cited in:


The paper C.-A. Dragoş, St. Preitl, R.-E. Precup, R.-G. Bulzan, E. M. Petriu and J. K. Tar, Experiments in Fuzzy Control of a Magnetic Levitation System Laboratory Equipment, Proceedings of 8th IEEE International Symposium on Intelligent Systems and Informatics SISY 2010, Subotica, Serbia, 2010, pp. 601-606, 2010 (ieeexplore.ieee.org) is cited in:


The paper C.-A. Dragoş, R.-E. Precup, E. M. Petriu, M. L. Tomescu, St. Preitl, R.-C. David and M.-B. Rădac, 2-DOF PI-Fuzzy Controllers for a Magnetic Levitation System, Proceedings of 8th International Conference on Informatics in Control, Automation and Robotics ICINCO 2011, Noordwijkerhout, The Netherlands, vol. 1, pp. 111-116, 2011 (www.scitepress.org) is cited in:


The book chapter R.-E. Precup, S. V. Spătaru, M.-B. Rădac, E. M. Petriu, St. Preitl, C.-A. Dragoş and R.-C. David, Experimental Results of Model-Based Fuzzy Control Solutions for a Laboratory Antilock Braking System, in: Human-Computer Systems Interaction: Backgrounds and Applications 2, Part 2, Z. S. Hippe, J. L. Kulikowski and T. Mroczek, Eds., Advances in Intelligent and Soft Computing, vol. 99 (Springer-Verlag), pp. 223-234, 2012 (link.springer.com, link.springer.com) is cited in:


The paper R.-C. David, R.-B. Grad, R.-E. Precup, M.-B. Rădac, C.-A. Dragoş and E. M. Petriu, An Approach to Fuzzy Modeling of Anti-lock Braking Systems, Proceedings of 17th Online World Conference on Soft Computing in Industrial Applications WSC17, 10 pp., 2012 (dap.vsb.cz/wsc17conf/) is cited in:


The paper R.-E. Precup, L. Kovacs, T. Haidegger, S. Preitl, A. Kovacs, B. Benyo, E. Borbely and Z. Benyo, Time delay compensation by fuzzy control in the case of master-slave telesurgery, Proceedings of 6th IEEE International Symposium on Applied Computational Intelligence and Informatics SACI 2011, Timisoara, Romania, pp. 305-310, 2011 (ieeexplore.ieee.org) is cited in:


The book chapter R.-E. Precup, F.-C. Enache, M.-B. Rădac, E. M. Petriu, St. Preitl and C.-A. Dragoş, Lead-Lag Controller-Based Iterative Learning Control Algorithms for 3D Crane Systems, in: Aspects of Computational Intelligence: Theory and Applications, L. Madarász and J. Živčák, Eds., Topics in Intelligent Engineering and Informatics, vol. 2 (Springer-Verlag), pp. 25-38, 2013 (link.springer.com, link.springer.com) is cited in:


The paper L.-O. Fedorovici, R.-E. Precup, F. Drăgan, R.-C. David and C. Purcaru, Embedding Gravitational Search Algorithms in Convolutional Neural Networks for OCR Applications, Proceedings of IEEE 7th International Symposium on Applied Computational Intelligence and Informatics SACI 2012, Timisoara, Romania, pp. 125-130, 2012 (ieeexplore.ieee.org) is cited in:


The paper C. Bărbulescu, St. Kilyeni, Gh. Vuc, B. Luştrea, R.-E. Precup and St. Preitl, Software Tool for Power Transfer Distribution Factors (PTDF) Computing within the Power Systems, Proceedings of IEEE Region 8 EUROCON 2009 Conference, Saint-Petersburg, Russia, pp. 517-524, 2009 (ieeexplore.ieee.org) is cited in:


The book St. Preitl and R.-E. Precup, Introduction to Control Engineering (in Romanian: Introducere in ingineria reglarii automate), Editura Politehnica Publishers, Timisoara, 334 pp., 2001 is cited in:


The paper C. Purcaru, R.-E. Precup, D. Iercan, L.-O. Fedorovici, R.-C. David and F. Drăgan, Optimal Robot Path Planning Using Gravitational Search Algorithm, International Journal of Artificial Intelligence (CESER Publications), vol. 10, no. S13, pp. 1-20, 2013 (www.ceser.in) is cited in:


The paper R.-E. Precup, M. L. Tomescu, E. M. Petriu, St. Preitl and C.-A. Dragoş, Stable design of a class of nonlinear discrete-time MIMO fuzzy control systems, Acta Polytechnica Hungarica (Óbuda University), vol. 9, no. 2, pp. 57-76, 2012, impact factor (IF) = 0.588, IF according to 2013 Journal Citation Reports (JCR) released by Clarivate Analytics in 2014 = 0.471 (uni-obuda.hu/journal/) is cited in:


The paper M.-B. Rădac, R.-E. Precup (corresponding author), E. M. Petriu and St. Preitl, Experiment-based Performance Improvement of State Feedback Control Systems for Single Input Processes, Acta Polytechnica Hungarica (Óbuda University), vol. 10, no. 1, pp. 5-24, 2013, impact factor (IF) = 0.471, IF according to 2013 Journal Citation Reports (JCR) released by Clarivate Analytics in 2014 = 0.471 (uni-obuda.hu/journal/) is cited in:


The paper St. Preitl, A.-I. Stînean, R.-E. Precup, Zs. Preitl, E. M. Petriu, C.-A. Dragoş and M.-B. Rădac, Controller Design Methods for Driving Systems Based on Extensions of Symmetrical Optimum Method with DC and BLDC Motor Applications , Proceedings of 2nd IFAC Conference on Advances in PID Control PID'12, Brescia, Italy, Advances in PID Control, vol. 2, R. Vilanova and A. Visioli, Eds., pp. 264-269, 2012 (www.ifac-papersonline.net, www.nt.ntnu.no/users/skoge/) is cited in:


The paper Cl. Pozna and R.-E. Precup, Aspects concerning the observation process modelling in the framework of cognition processes, Acta Polytechnica Hungarica (Óbuda University), vol. 9, no. 1, pp. 203-223, 2012, impact factor (IF) = 0.588, IF according to 2013 Journal Citation Reports (JCR) released by Clarivate Analytics in 2014 = 0.471 (uni-obuda.hu/journal/) is cited in:


The paper S. Biro, R.-E. Precup and D. Todinca, Double inverted pendulum control by linear quadratic regulator and reinforcement learning, Proceedings of International Joint Conference on Computational Cybernetics and Technical Informatics ICCC-CONTI 2010, Timisoara, Romania, pp. 159-164, 2010 (ieeexplore.ieee.org) is cited in:


The paper T. Haidegger, L. Kovács, R.-E. Precup, St. Preitl, B. Benyó and Z. Benyó, Cascade Control for Telerobotic Systems Serving Space Medicine, Proceedings of 18th IFAC World Congress, Milano, Italy, pp. 3759-3764, 2011 (www.ifac-papersonline.net, www.nt.ntnu.no/users/skoge/) is cited in:


The paper R.-C. David, R.-E. Precup, E. M. Petriu, C. Purcaru and St. Preitl, PSO and GSA Algorithms for Fuzzy Controller Tuning with Reduced Process Small Time Constant Sensitivity, Proceedings of 16th International Conference on System Theory, Control and Computing ICSTCC 2012, Sinaia, Romania, pp. 6 pp., 2012 (ieeexplore.ieee.org) is cited in:


The paper R.-C. David, R.-E. Precup (corresponding author), E. M. Petriu, M.-B. Rădac and St. Preitl, Gravitational Search Algorithm-Based Design of Fuzzy Control Systems with a Reduced Parametric Sensitivity, Information Sciences (Elsevier Science), vol. 247, pp. 154-173, 2013, impact factor (IF) = 3.893, IF according to 2013 Journal Citation Reports (JCR) released by Clarivate Analytics in 2014 = 3.893 (www.sciencedirect.com) is cited in:


The paper R.-E. Precup, R.-C. David, E. M. Petriu, St. Preitl and M.-B. Rădac, Novel Adaptive Charged System Search Algorithm for Optimal Tuning of Fuzzy Controllers, Expert Systems with Applications (Elsevier Science), vol. 41, no. 4, part 1, pp. 1168-1175, 2014, impact factor (IF) = 1.965, IF according to 2013 Journal Citation Reports (JCR) released by Clarivate Analytics in 2014 = 1.965 (www.sciencedirect.com) is cited in:


The paper R.-C. David, R.-E. Precup, E. M. Petriu, M.-B. Rădac, C. Purcaru, C.-A. Dragoş and St. Preitl, Adaptive Gravitational Search Algorithm for PI-fuzzy Controller Tuning, Proceedings of 9th International Conference on Informatics in Control, Automation and Robotics ICINCO 2012, Rome, Italy, vol. 1, pp. 136-141, 2012 (www.scitepress.org) is cited in:


The paper R.-E. Precup, R.-C. David, E. M. Petriu, St. Preitl and M.-B. Rădac, Fuzzy logic-based adaptive gravitational search algorithm for optimal tuning of fuzzy controlled servo systems, IET Control Theory & Applications, vol. 7, no. 1, pp. 99-107, 2013, impact factor (IF) = 1.844, IF according to 2013 Journal Citation Reports (JCR) released by Clarivate Analytics in 2014 = 1.844 (digital-library.theiet.org) is cited in:


The book chapter L.-O. Fedorovici, R.-E. Precup, R.-C. David and F. Drăgan, GSA-Based Training of Convolutional Neural Networks for OCR Applications, in: Computational Intelligence Systems in Industrial Engineering, C. Kahraman, Ed., Atlantis Computational Intelligence Systems, vol. 6 (Atlantis Press and Springer-Verlag), pp. 481-504, 2012 (link.springer.com, link.springer.com) is cited in:


The paper A.-I. Stînean, St. Preitl, R.-E. Precup, C.-A. Dragoş and M.-B. Rădac, Hybrid Fuzzy Control Solutions for Brushless DC Drives with Variable Moment of Inertia, Proceedings of IEEE 10th Jubilee International Symposium on Intelligent Systems and Informatics SISY 2012, Subotica, Serbia, pp. 317-322, 2012 (ieeexplore.ieee.org) is cited in:


The paper M.-B. Rădac, R.-B. Grad, R.-E. Precup, St. Preitl, C.-A. Dragoş, E. M. Petriu and A. Kilyeni, Mixed Virtual Reference Feedback Tuning - Iterative Feedback Tuning Approach to the Position Control of a Laboratory Servo System, Proceedings of International Conference on Computer as a Tool EUROCON 2011, Lisbon, Portugal, paper index 453, 4 pp., 2011 (ieeexplore.ieee.org) is cited in:


The paper R.-C. David, R.-E. Precup, St. Preitl, J. K. Tar and J. Fodor, Parametric sensitivity reduction of PI-based control systems by means of evolutionary optimization algorithms, Proceedings of 6th IEEE International Symposium on Applied Computational Intelligence and Informatics SACI 2011, Timisoara, Romania, pp. 241-246, 2011 (ieeexplore.ieee.org) is cited in:


The paper R.-E. Precup and St. Preitl, Describing Function Method for PI-Fuzzy Controlled Systems Stability Analysis, The Annals of "Dunarea de Jos" University of Galati, Electrotechnics, Electronics, Automatic Control, Informatics, Fascicle III, pp. 14-19, 2004 (www.ann.ugal.ro/eeai/) is cited in:


The paper R.-E. Precup, St. Preitl and P. Korondi, Development of Fuzzy Controllers with Dynamics Regarding Stability Conditions and Sensitivity Analysis, Journal of Advanced Computational Intelligence and Intelligent Informatics (Fuji Technology Press), vol. 8, no. 5, pp. 499-506, 2004 (www.fujipress.jp/JACIII/) is cited in:


The paper St. Preitl, R.-E. Precup, Zs. Preitl and L. Kovacs, Development Methods of Fuzzy Controllers for Low Order Benchmarks (Electrical Drives), Proceedings of 2002 First International IEEE Symposium "Intelligent Systems" IS'2002, Varna, Bulgaria, vol. II Invited Sessions EUNITE, pp. 13-18, 2002 (ieeexplore.ieee.org) is cited in:


The book St. Preitl, R.-E. Precup and Zs. Preitl, Process Control Structures and Algorithms, vol. 2 (in Romanian: Structuri si algoritmi pentru conducerea automata a proceselor, vol. 2), Editura Orizonturi Universitare Publishers, Timisoara, 272 pp., 2009 is cited in:


The paper R.-E. Precup, St. Preitl, B.-I. Ursache, P. A. Clep, P. Baranyi and J. K. Tar, On the combination of tensor product and fuzzy models, Proceedings of IEEE International Conference on Automation, Quality and Testing, Robotics AQTR 2008, Cluj-Napoca, Romania, vol. 2, pp. 48-53, 2008 (ieeexplore.ieee.org) is cited in:


The paper C. Purcaru, R.-E. Precup, D. Iercan, L.-O. Fedorovici, B. Dohangie and F. Drăgan, NRobotic mobile robot navigation using traffic signs in unknown indoor environments, Proceedings of IEEE 8th International Symposium on Applied Computational Intelligence and Informatics SACI 2013, Timisoara, Romania, pp. 29-34, 2013 (ieeexplore.ieee.org) is cited in:


The paper C.-A. Dragoş, St. Preitl, R.-E. Precup, E. M. Petriu and A.-I. Stînean, Adaptive Control Solutions for the Position Control of Electromagnetic Actuated Clutch Systems, Proceedings of 2012 IEEE Intelligent Vehicles Symposium IEEE IV'12, Alcala de Henares, Spain, pp. 81-86, 2012 (ieeexplore.ieee.org) is cited in:


The paper A.-I. Stînean, St. Preitl, R.-E. Precup, C.-A. Dragoş, M.-B. Rădac and E. M. Petriu, Low-Cost Neuro-Fuzzy Control Solution for Servo Systems with Variable Parameters, Proceedings of 2013 IEEE International Conference on Computational Intelligence and Virtual Environments for Measurement Systems and Applications CIVEMSA 2013, Milano, Italy, pp. 156-161, 2013 (ieeexplore.ieee.org) is cited in:


The paper J. K. Tar, I. J. Rudas, J. F. Bito, St. Preitl and R.-E. Precup, Convergence stabilization by parameter tuning in robust fixed point transformation based adaptive control of underactuated MIMO systems, Proceedings of 2010 International Joint Conference on Computational Cybernetics and Technical Informatics ICCC-CONTI 2010, Timisoara, Romania, pp. 407-412, 2010 (ieeexplore.ieee.org) is cited in:


The paper O. Baniaş, D.-I. Curiac and R.-E. Precup, Sensor Networks Architecture for Vehicles and Pedestrians Traffic Control, Scientific Bulletin of The "Politehnica" University of Timisoara, Romania, Transactions on Automatic Control and Computer Science, vol. 51, no. 3, pp. 11-16, 2006 (www.ac.upt.ro/journal/) is cited in:


The paper O. Baniaş, R.-E. Precup and D.-I. Curiac, Problem Setting and Modeling in Vehicles and Pedestrians Traffic Control Using Sensor Networks, Proceedings of 4th International Symposium on Applied Computational Intelligence and Informatics SACI '07, Timisoara, Romania, pp. 83-88, 2007 (ieeexplore.ieee.org) is cited in:


The paper O. Baniaş, R.-E. Precup and D.-I. Curiac, Multiagent architecture applied in decentralized real-time urban road traffic control, Proceedings of 5th International Symposium on Applied Computational Intelligence and Informatics SACI '09, Timisoara, Romania, pp. 271-276, 2009 (ieeexplore.ieee.org) is cited in:


The paper R.-E. Precup, R.-C. David, E. M. Petriu, St. Preitl and M.-B. Rădac, Experiments in fuzzy controller tuning based on an adaptive gravitational search algorithm, Proceedings of the Romanian Academy, Series A: Mathematics, Physics, Technical Sciences, Information Science (Editura Academiei Romane, Bucharest), vol. 14, no. 4, pp. 360-367, 2013, impact factor (IF) = 1.115, IF according to 2013 Journal Citation Reports (JCR) released by Clarivate Analytics in 2014 = 1.115 (www.academiaromana.ro) is cited in:


The paper R.-E. Precup, T. Haidegger, St. Preitl, B. Benyó, A. S. Paul and L. Kovács, Fuzzy control solution for telesurgical applications, Applied and Computational Mathematics (Ministry of Communications and Information Technology, Azerbaijan National Academy of Sciences and Institute of Applied Mathematics of Baku State University), vol. 11, no. 3, pp. 378-397, 2012, impact factor (IF) = 0.750, IF according to 2013 Journal Citation Reports (JCR) released by Clarivate Analytics in 2014 = 0.697 (www.acmij.az) is cited in:


The paper R.-E. Precup, E. M. Petriu, M.-B. Rădac, St. Preitl, L.-O. Fedorovici and C.-A. Dragoş, Cascade control system-based cost effective combination of tensor product model transformation and fuzzy control, Asian Journal of Control (John Wiley and Sons), vol. 17, no. 2, pp. 381-391, 2015, impact factor (IF) = 0.000, IF according to 2013 Journal Citation Reports (JCR) released by Clarivate Analytics in 2014 = 0.000 (onlinelibrary.wiley.com) is cited in:


The paper R.-E. Precup, M. L. Tomescu, St. Preitl, E. M. Petriu, J. Fodor and Cl. Pozna, Stability analysis and design of a class of MIMO fuzzy control systems, Journal of Intelligent & Fuzzy Systems (IOS Press), vol. 25, no. 1, pp. 145-155, 2013, impact factor (IF) = 0.936, IF according to 2013 Journal Citation Reports (JCR) released by Clarivate Analytics in 2014 = 0.936 (iospress.metapress.com) is cited in:


The paper R.-E. Precup, H.-I. Filip, M.-B. Rădac, E. M. Petriu, St. Preitl and C.-A. Dragoş, Online Identification of Evolving Takagi-Sugeno-Kang Fuzzy Models for Crane Systems, Applied Soft Computing (Elsevier Science), vol. 24, pp. 1155-1163, 2014, impact factor (IF) = 2.679, IF according to 2013 Journal Citation Reports (JCR) released by Clarivate Analytics in 2014 = 2.679 (www.sciencedirect.com) is cited in:


The book chapter C.-A. Dragoş, St. Preitl, R.-E. Precup and E. M. Petriu, Points of View on Magnetic Levitation System Laboratory-Based Control Education, in: Human-Computer Systems Interaction: Backgrounds and Applications 2, Part 2, Z. S. Hippe, J. L. Kulikowski and T. Mroczek, Eds., Advances in Intelligent and Soft Computing, vol. 99 (Springer-Verlag), pp. 261-275, 2012 (link.springer.com, link.springer.com) is cited in:


The paper C.-A. Dragoş, St. Preitl, R.-E. Precup, M. Creţiu and J. Fodor, Modern Control Solutions for Mechatronic Servosystems. Comparative Case Studies, Proceedings of 10th International Symposium of Hungarian Researchers on Computational Intelligence and Informatics CINTI 2009, Budapest, Hungary, pp. 69-82, 2009 (bmf.hu/conferences/cinti2009/) is cited in:


The paper C. Purcaru, R.-E. Precup, D. Iercan, L.-O. Fedorovici and R.-C. David, Hybrid PSO-GSA Robot Path Planning Algorithm in Static Environments with Danger Zones, Proceedings of 17th IEEE International Conference on System Theory, Control and Computing ICSTCC 2013, Sinaia, Romania, pp. 434-439, 2013 (ieeexplore.ieee.org) is cited in:


The paper R.-E. Precup, M.-L. Tomescu and C.-A. Dragoş, Stabilization of Rössler chaotic dynamical system using fuzzy logic control algorithm, International Journal of General Systems (Taylor & Francis), vol. 43, no. 5, pp. 413-433, 2014, impact factor (IF) = 0.786, IF according to 2013 Journal Citation Reports (JCR) released by Clarivate Analytics in 2014 = 0.786 (www.tandfonline.com) is cited in:


The paper M.-B. Rădac, R.-E. Precup (corresponding author), E. M. Petriu, St. Preitl and C.-A. Dragoş, Data-driven reference trajectory tracking algorithm and experimental validation, IEEE Transactions on Industrial Informatics, vol. 9, no. 4, pp. 2327-2336, 2013, impact factor (IF) = 8.785, IF according to 2013 Journal Citation Reports (JCR) released by Clarivate Analytics in 2014 = 8.785 (ieeexplore.ieee.org) is cited in:


The paper M.-B. Rădac, R.-E. Precup (corresponding author), E. M. Petriu and St. Preitl, Iterative Data-Driven Tuning of Controllers for Nonlinear Systems with Constraints, IEEE Transactions on Industrial Electronics, vol. 61, no. 11, pp. 6360-6368, 2014, impact factor (IF) = 6.500, IF according to 2013 Journal Citation Reports (JCR) released by Clarivate Analytics in 2014 = 6.500 (ieeexplore.ieee.org) is cited in:


The paper M.-B. Rădac, R.-E. Precup, St. Preitl, J. K. Tar, J. Fodor and E. M. Petriu, Gain-Scheduling and Iterative Feedback Tuning of PI Controllers for Longitudinal Slip Control, Proceedings of 6th IEEE International Conference on Computational Cybernetics ICCC 2008, Stara Lesna, Slovakia, pp. 183-188, 2008 (ieeexplore.ieee.org) is cited in:


The paper M.-B. Rădac, R.-E. Precup, St. Preitl, J. K. Tar and E. M. Petriu, Linear and Fuzzy Control Solutions for a Laboratory Anti-lock Braking System, Proceedings of 6th International Symposium on Intelligent Systems and Informatics SISY 2008, Subotica, Serbia, CD-ROM, paper index 49, 6 pp., 2008 (ieeexplore.ieee.org) is cited in:


The paper St. Preitl, R.-E. Precup, A.-I. Stînean, C.-A. Dragoş and M.-B. Rădac, Extensions in symmetrical optimum design method. Advantages, applications and perspectives, Proceedings of 6th IEEE International Symposium on Applied Computational Inteligence and Informatics SACI 2011, Timisoara, Romania, pp. 17-22, 2011 (ieeexplore.ieee.org) is cited in:


The paper R.-E. Precup, C.-A. Dragoş, St. Preitl, E. M. Petriu and M.-B. Rădac, A simple fuzzy control design for powertrain systems with three inertias, Memoirs of the Scientific Sections of the Romanian Academy (Editura Academiei Romane, Bucharest), Tome XXXVI, pp. 97-110, 2013 (mss.academiaromana-is.ro) is cited in:


The paper Cl. Pozna, R.-E. Precup, J. Kovacs and P. Foldesi, Cooperation in Multiagent Systems, Proceedings of IEEE 9th International Symposium on Intelligent Systems and Informatics SISY 2011, Subotica, Serbia, pp. 195-200, 2011 (ieeexplore.ieee.org) is cited in:


The paper R.-E. Precup, St. Preitl and Zs. Preitl, Fuzzy Control Solution for a Class of Tricycle Mobile Robots, Proceedings of 3rd IEEE International Conference on Mechatronics ICM 2006, Budapest, Hungary, pp. 203-208, 2006 (ieeexplore.ieee.org) is cited in:


The paper R.-E. Precup, R.-C. David, A.-I. Stînean, M.-B. Rădac and E. M. Petriu, Adaptive Hybrid Particle Swarm Optimization-Gravitational Search Algorithm for Fuzzy Controller Tuning, Proceedings of 2014 IEEE International Symposium on Innovations in Intelligent Systems and Applications INISTA 2014, Alberobello, Italy, pp. 14-20, 2014 (ieeexplore.ieee.org) is cited in:


The paper M.-B. Rădac, F.-C. Enache, R.-E. Precup, E. M. Petriu, St. Preitl and C.-A. Dragoş, Previous and Current Cycle Learning Approach to a 3D Crane System Laboratory Equipment, Proceedings of 15th International Conference on Intelligent Engineering Systems INES 2011, Poprad, Slovakia, pp. 197-202, 2011 (ieeexplore.ieee.org) is cited in:


The paper R.-E. Precup, M. L. Tomescu, E. M. Petriu, St. Preitl, J. Fodor and D. Bărbulescu, Stability Analysis of a Class of MIMO Fuzzy Control Systems, Proceedings of 2010 IEEE International Conference on Fuzzy Systems FUZZ-IEEE 2010, Barcelona, Spain, pp. 2885-2890, 2010 (ieeexplore.ieee.org) is cited in:


The paper St. Preitl, R.-E. Precup, C.-A. Dragoş and M.-B. Rădac, Tuning of 2-DOF Fuzzy PI(D) Controllers. Laboratory Applications, Proceedings of 11th IEEE International Symposium on Computational Intelligence and Informatics CINTI 2010, Budapest, Hungary, pp. 237-242, 2010 (ieeexplore.ieee.org) is cited in:


The paper Cl. Pozna, R.-E. Precup (corresponding author) and P. Földesi, A novel pose estimation algorithm for robotic navigation, Robotics and Autonomous Systems (Elsevier Science), vol. 63, pp. 10-21, 2015, impact factor (IF) = 1.105, IF according to 2013 Journal Citation Reports (JCR) released by Clarivate Analytics in 2014 = 1.105 (www.sciencedirect.com) is cited in:


The paper R.-E. Precup, M.-C. Sabău and E. M. Petriu, Nature-Inspired Optimal Tuning of Input Membership Functions of Takagi-Sugeno-Kang Fuzzy Models for Anti-lock Braking Systems, Applied Soft Computing (Elsevier Science), vol. 27, pp. 575-589, 2015, impact factor (IF) = 2.679, IF according to 2013 Journal Citation Reports (JCR) released by Clarivate Analytics in 2014 = 2.679 (www.sciencedirect.com) is cited in:


The paper R.-E. Precup, R.-C. David, E. M. Petriu, M.-B. Rădac and St. Preitl, Adaptive GSA-Based Optimal Tuning of PI Controlled Servo Systems With Reduced Process Parametric Sensitivity, Robust Stability and Controller Robustness, IEEE Transactions on Cybernetics, vol. 44, no. 11, pp. 1997-2009, 2014, impact factor (IF) = 0.000, IF according to 2013 Journal Citation Reports (JCR) released by Clarivate Analytics in 2014 = 0.000 (ieeexplore.ieee.org) is cited in:


The paper R.-E. Precup, A.-L. Borza, M.-B. Rădac and E. M. Petriu, Performance Analysis of Torque Motor Systems with PID Controllers Tuned by Bacterial Foraging Optimization Algorithms, Proceedings of 2014 IEEE International Conference on Computational Intelligence and Virtual Environments for Measurement Systems and Applications CIVEMSA 2014, Ottawa, ON, Canada, pp. 141-146, 2014 (ieeexplore.ieee.org) is cited in:


The paper R.-E. Precup, P. Angelov, B. S. J. Costa and M. Sayed-Mouchaweh, An overview on fault diagnosis and nature-inspired optimal control of industrial process applications, b>Computers in Industry (Elsevier Science), DOI: 10.1016/j.compind.2015.03.001, 20 pp., online first in 2015, impact factor (IF) = 1.457, IF according to 2013 Journal Citation Reports (JCR) released by Clarivate Analytics in 2014 = 1.457 (www.sciencedirect.com) is cited in: