CITATIONS OF MY PAPERS


More than 1400 independent citations of my papers from indexed papers (without autocitations):

406 WoS (ISI) journals, 362 WoS (ISI) Proc, 315 IEEE Xplore/INSPEC/Compendex/Scopus/Springer, 152 others DBs, 23 books/book chapters, 45 US/EU patents, 101 PhD/MS thesis abroad.

- my Hirsch index (author impact) from Scholar Google: h-indexSG = 19; from Scopus: h-indexSC = 15.

- ResearcherID - A Global Community where Researchers Connect: http://www.researcherid.com/rid/C-4386-2011, h-indexWoS-ISI = 13.

- Cumulative WoS-ISI_SCI (Science Citation Index) impact factor (IF/2017) of independent citations of my papers: total IF = 1397; average IF = 3.83.

- Cumulative WoS-ISI_SCI impact factor (IF/2017) of my 17 papers: total IF = 55.35; average IF = 3.26

- Citations include authors from 117 universities (23.4%) in Top 500 World Universities/2017*, http://www.shanghairanking.com/ARWU2017.html

 

MY CITED PAPERS (66)

b

[A1'17] O. Cornea, G.-D. Andreescu, N. Muntean, D. Hulea, Bidirectional power flow control in a DC microgrid through a switched-capacitor cell hybrid DC-DC converter, IEEE Transactions on Industrial Electronics, ISSN: 0278-0046, vol. 64, no. 4, pp. 3012-3022, Apr. 2017. (ISI 7.05/17, WOS:000397770200047 IEEE), 10.1109/TIE.2016.2631527 (9: 6 ISI, 1 ISI Proc, 1 PhD, 1 others)

[A1'16] A.M. Kuczapski, G.-D. Andreescu, Real-time interfacing for fault detection and auralization with MED-EL cochlear implant processors, Proc. 11th IEEE Int. Symposium on Applied Computational Intelligence and Informatics (SACI 2016), Timisoara, Romania, ISBN: 978-1-5090-2380-6, pp. 191-195, May 2016. 10.1109/SACI.2016.7507368, (ISI Pro, WOS:000387119900034, IEEE) (1: 1 others)

[A1'15] C. Lascu, G.-D. Andreescu, Self-commissioning of electrical parameters for PMSM in sensorless drives, in Proc. Int. Aegean Conf. Electrical Machines and Power Electronics (ACEMP 2015), Intl Conf. on Optimization of Electrical & Electronic Equipment (OPTIM 2015), Int. Symposium on Advanced Electromechanical Motion Systems (ELECTROMOTION 2015), Side, Turkey, ISBN 978-1-4673-7239-8, pp. 605-610, Sep. 2015, 10.1109/OPTIM.2015.7427054, (ISI Proc, WOS:000382957000094, IEEE) (2: 2 ISI)

[A1'14] M.C. Ancuti, L. Tutelea, G.-D. Andreescu, F. Blaabjerg, C. Lascu, I. Boldea, Practical wide-speed-range sensorless control system for permanent magnet reluctance synchronous motor drives via active flux model, Electric Power Components and Systems, Taylor & Francis, ISSN 1532-5008, vol. 42, no. 1, pp. 91-102, Jan. 2014. (ISI 1.144/17, WOS:000328016500009, tandfonline) 10.1080/15325008.2013.842617 (5: 3 ISI, 1 ISI Proc, 1 IEEE/Scopus)

[A2'14] E.H. Gurban, G.-D. Andreescu, Comparison of modified Smith predictor and PID controller tuned by genetic algorithms for greenhouse climate control, in Proc. IEEE 9th Int. Symp. on Applied Computational Intelligence and Informatics (SACI 2014), Timisoara, Romania, ISBN 978-1-4799-4694-5, pp. 79-83, May 2014, 10.1109/SACI.2014.6840039, (ISI Proc, WOS:000343400600013, IEEE) (10: 3 ISI, 2 ISI Proc, 1 Scopus, 4 others)

[A3'14] E.H. Gurban, T.-L. Dragomir, G.-D. Andreescu, Greenhouse climate control enhancement by using genetic algorithms, Journal of Control Engineering and Applied Informatics, ISSN 1454-8658, vol. 16, no. 3, pp. 35-45, Sep. 2014. (IF: 0.698/17, WOS:000342715400004) ceai, (4: 1 ISI, 3 ISI Proc)

[A1'13] S.-C. Agarlita, C.-E. Coman, G.-D. Andreescu, I. Boldea, Stable V/f control system with controlled power factor angle for permanent magnet synchronous motor drives, IET Electric Power Applications, ISSN 1751-8660, vol. 7, no. 4, pp. 278-286, Apr. 2013, 10.1109/TIA.2012.2226194, (ISI 2.211/17, WOS:000321716900005, IEEE), (30: 12 ISI, 9 ISI Proc, 6 IEEE/Scopus, 3 MS)

[A2'13] G.-D. Andreescu, C.-E. Coman, Integrated starter-alternator control system for automotive, in Proc. 14th IEEE Int. Symp. on Computational Intelligence and Informatics (CINTI 2013), Budapest, Hungary, ISBN 978-1-4799-0194-4, pp. 339-343, Nov. 2013, 10.1109/CINTI.2013.6705217, (ISI Proc, WOS:000345626300057, IEEE), (6: 1 ISI, 4 ISI Proc, 1 book)

[A3'13] E.H. Gurban, G.-D. Andreescu, Employing 2DoF PID controllers to improve greenhouse climate system robustness, in Proc. IEEE Int. Conf. on System Science and Engineering (ICSSE 2013), Budapest, Hungary, ISBN 978-1-4799-0007-7, pp. 93-98, July 2013, 10.1109/ICSSE.2013.6614639, (ISI Proc, WOS:000335399900018, IEEE), (4: 1 ISI, 2 ISI Proc, 1 book-ISI)

[A4'13] C.-E. Coman, S.-C. Agarlita, G.-D. Andreescu, V/f control strategy with constant power factor angle for SPMSM drives, with experiments, in Proc. 8th IEEE Int. Symp. on Applied Computational Intelligence and Informatics (SACI 2013), Timisoara, Romania, ISBN: 978-1-4673-6397-6, 6p, May 2013. 10.1109/SACI.2013.6608956, (ISI Proc, WOS:000333188100026, IEEE), (3: 2 ISI, 1 ISI Proc)

[A1'12] A. Stirban, I. Boldea, G.-D. Andreescu, Motion-sensorless control of BLDC-PM motor with offline FEM-information-assisted position and speed observer, IEEE Transactions on Industry Applications, ISSN 0093-9994, vol. 48, no. 6, pp. 1950-1958, Nov./Dec. 2012, 10.1109/TIA.2012.2226194, (ISI 2.743/17, WOS:000313364000019, IEEE), (42: 16 ISI, 7 ISI Proc, 8 IEEE/Scopus, 5 other, 5 patent, 1 MS)

[A2'12] A. Moldovan, S.C. Agarlita, G.D. Andreescu, I. Boldea, Wide speed range V/f with stabilizing loops control of tooth-wound IPMSM drives, in Proc. 13th Int. Conf. Optimization of Electrical and Electronic Equipment (OPTIM 2012), Brasov, Romania, ISSN 1842-0133, ISBN 978-1-4673-1650-7, pp. 424-431, May 2012, 10.1109/OPTIM.2012.6231769, (ISI Proc, WOS:000398866700063, IEEE), (5: 3 ISI, 2 ISI Proc)

[A3'12] G.-D. Andreescu, C.-E. Coman, A. Moldovan, I. Boldea, Stable V/f control system with unity power factor for PMSM drives, in Proc. 13th Int. Conf. on Optimization of Electrical and Electronic Equipment (OPTIM 2012), Brasov, Romania, ISSN: 1842-0133, ISBN: 978-1-4673-1650-7, pp. 432-437, May 2012, 10.1109/OPTIM.2012.6231937, (ISI Proc, WOS:000398866700064, IEEE), (19: 4 ISI, 5 ISI Proc, 1 IEEE, 8 patent, 1 PhD)

[A4'12] E.H. Gurban, G.-D. Andreescu, Comparison study of PID controller tuning for greenhouse climate with feedback-feedforward linearization and decoupling, in Proc. 16th Int. Conf. on System Theory, Control and Computing (ICSTCC 2012), Sinaia, Romania, ISBN 978-1-4673-4534-7, pp. 1-6, Oct. 2012, (IEEE), (12: 6 ISI, 3 ISI Proc, 1 IEEE/Scopus/ScDirect, 2 books)

[A1'11] V. Coroban-Schramel, I. Boldea, G.-D. Andreescu, F. Blaabjerg, Active-flux-based motion-sensorless vector control of biaxial excitation generator/motor for automobiles, IEEE Transactions on Industry Applications, ISSN 0093-9994, vol. 47, no. 2, pp. 812-819, Mar./Apr. 2011, 10.1109/TIA.2010.2103350, (ISI 2.743/17, WOS:000288682300014, IEEE), (19: 8 ISI, 3 ISI Proc, 4 IEEE/Scopus, 2 other, 2 PhD)

[A2'11] M. Iacob, G.-D. Andreescu, Implementation of hardware-in-the-loop system for drum-boiler-turbine decoupled multivariable control, in Proc. 6th IEEE Int. Symp. on Applied Computational Intelligence and Informatics (SACI 2011), Timisoara, Romania, ISSN 978-1-4244-9108-7, pp. 45-50, May 2011, 10.1109/SACI.2011.5872971, (IEEE), (6: 2 ISI, 1 ISI Proc, 3 IEEE/ScDirect/SpringerLink)

[A3'11] M. Iacob, G.-D. Andreescu, Real-time hardware-in-the-loop test platform for thermal power plant control systems, in Proc. IEEE 9th Int. Symp. on Intelligent Systems and Informatics (SISY 2011), Subotica, Serbia, ISBN 978-1-4577-1975-2/11, pp. 495-500, Sep. 2011, 10.1109/SISY.2011.6034378, (IEEE), (12: 1 ISI, 6 ISI Proc, 2 IEEE/Scopus/Springer, 3 other).

[A4'11] E.H. Gurban, G.-D. Andreescu, SCADA element solutions using Ethernet and mobile phone network, in Proc. IEEE 9th Int. Symp. on Intelligent Systems and Informatics (SISY 2011), Subotica, Serbia, ISBN 978-1-4577-1975-2/11, pp. 303-308, Sep. 2011, 10.1109/SISY.2011.6034378, (IEEE), (14: 1 ISI, 2 ISI Proc, 6 IEEE/Scopus, 5 other)

[A5'11] M. Iacob, G.-D. Andreescu, Drum-boiler control system employing shrink and swell effect remission in thermal power plants, in Proc. 3rd Int. Congress on Ultra Modern Telecommunications and Control Systems and Workshops (ICUMT 2011), Budapest, Hungary, ISSN 2157-0221, ISBN 978-1-4577-0682-0, pp. 1-8, Oct. 2011, (IEEE), (8: 1 IEEE, 1 PhD, 3 MS, 3 other)

[A6'11] M. Iacob, G.-D. Andreescu, R. Antal, A.-M. Dan, Multivariable adaptive control with hardware-in-the-loop for a drum-type boiler-turbine system, in Proc. 19th Mediterranean Conf. on Control and Automation (MED 2011), Corfu, Greece, ISBN 978-1-4577-0124-5, pp. 898-902, June 2011, 10.1109/MED.2011.5983118, (IEEE), (3: 1 ISI Proc, 1 IEEE, 1 other)

[A7'11] M. Iacob, G.-D. Andreescu, N. Muntean, SCADA system for thermal power plant, in Instrument Engineers' Handbook, vol. 3: Process Software and Digital Networks, Eds.: B.G. Liptak, H. Eren, 4th ed., ISBN 978-1-439 8-1776-6, Ch. 8: Process Control and Automation Applications, CRC Press, USA, pp. 930-939, Aug. 2011, 10.1201/b11093-72, (3: 1 IEEE/Scopus, 2 other)

[A1'10] I. Boldea, V. Coroban-Schramel, G.-D. Andreescu, F. Blaabjerg, S. Scridon, BEGA starter/alternator-Vector control implementation and performance for wide speed range at unity power factor operation, IEEE Transactions on Industry Applications, ISSN 0093-9994, vol. 46, no. 1, pp. 150-158, Jan./Feb. 2010, 10.1109/TIA.2009.2036534, (ISI 2.743/17, WOS:000273771700018, IEEE), (19: 6 ISI, 5 ISI Proc, 3 IEEE, 3 PhD, 1 patenet, 1 other)

[A2'10] R. Ancuti, I. Boldea, G.-D. Andreescu, Sensorless V/f control of high-speed surface permanent magnet synchronous motor drives with two novel stabilising loops for fast dynamics and robustness, IET Electric Power Applications, ISSN 1751-8660, vol. 4, no. 3, pp. 149-157, Mar. 2010, 10.1049/iet-epa.2009.0077, (ISI 2.211/17, WOS:000275851800003, IEEE), (53: 12 ISI, 18 ISI Proc, 8 IEEE/Scopus, 4 patents, 1 book, 3 PhD, 2 MS, 5 other)

[A3'10] G.-D. Andreescu, C. Schlezinger, Enhancement sensorless control system for PMSM drives using square-wave signal injection, in Proc. 2010 Int. Symp. on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM 2010), Pisa, Italy, ISBN 978-1-4244-4986-6, pp. 1508-1511, Jun. 2010, 10.1109/SPEEDAM.2010.5545090, (IEEE), (9: 2 ISI, 1 ISI Proc, 2 IEEE/Scopus, 1 PhD, 3 other)

[A4'10] I. Boldea, A. Moldovan, V. Schramel-Coroban, G.-D. Andreescu, L. Tutelea, A class of fast dynamics V/f sensorless AC general drives with PM-RSM as a case study, in Proc. 12th Int. Conf. on Optimization of Electrical and Electronic Equipment (OPTIM 2010), Brasov, Romania, ISSN 1842-0133, ISBN 978-1-4244-7019-8, pp. 453-459, May 2010, 10.1109/OPTIM.2010.5510562, (ISI Proc, WOS:000291967300064, IEEE), (7: 2 ISI, 4 ISI Proc, 1 IEEE)

[A5'10] L.I. Iepure, I. Boldea, G.-D. Andreescu, D. Iles, F. Blaabjerg, Novel motion sensorless control of single phase brushless DC PM motor drive, with experiments, in Proc. 12th Int. Conf. on Optimization of Electrical and Electronic Equipment (OPTIM 2010), Brasov, Romania, ISSN 1842-0133, ISBN 978-1-4244-7019-8, pp. 329-336, May 2010, 10.1109/OPTIM.2010.5510470, (ISI Proc, WOS:000291967300045, IEEE), (5: 2 ISI, 1 ISI Proc, 1 other, 1 PhD)

[A6'10] A. Stirban, I. Boldea, G.-D. Andreescu, D. Iles, F. Blaabjerg, Motion sensorless control of BLDC PM motor with offline FEM info assisted state observer, in Proc. 12th Int. Conf. on Optimization of Electrical and Electronic Equipment (OPTIM 2010), Brasov, Romania, ISSN 1842-0133, ISBN 978-1-4244-7019-8, pp. 321-328, May 2010, 10.1109/OPTIM.2010.5510439, (ISI Proc, WOS:000291967300044, IEEE), (7: 1 ISI, 1 ISI Proc, 2 patent, 1 others, 2 MS)

[A7'10] A. Stirban, I. Boldea, G.-D. Andreescu, D. Iles, F. Blaabjerg, FEM assisted position and speed observer for BLDC PM motor drive sensorless control, with experiments, in Proc. 14th Int. Power Electronics and Motion Control Conf. (EPE/PEMC 2010), Ohrid, Macedonia, ISBN 978-1-4244-7856-9, pp. T4:34-40, Sep. 2010, 10.1109/EPEPEMC.2010.5606879, (ISI Proc, WOS:000319521600294, IEEE), (2: 1 ISI Proc, 1 other)

[A8'10] L.I. Iepure, I. Boldea, G.-D. Andreescu, F. Blaabjerg, Improved state observers for sensorless single phase BLDC-PM motor drives, in Proc. IECON 2010 - 36th Annual Conf. of the IEEE Industrial Electronics Soc., Glendale, AZ, USA, ISSN 1553-572X, ISBN: 978-1-4244-5225-5, pp. 870-875, Nov. 2010, 10.1109/IECON.2010.5675170, (ISI Proc, WOS:000287328100144, IEEE), (3: 1 ISI Proc, 1 PhD, 1 other)

[A9'10] M.C. Paicu, L. Tutelea, I. Boldea, G.-D. Andreescu, R. Ancuti, PM-RSM sensorless vector control: Zero q-axis flux versus approximate maximum torque per current, with experiments, in Proc. 12th Int. Conf. on Optimization of Electrical and Electronic Equipment (OPTIM 2010), Brasov, Romania, ISSN 1842-0133, ISBN 978-1-4244-7019-8, pp. 460-468, May 2010, 10.1109/OPTIM.2010.5510559, (ISI Proc, WOS:000291967300065, IEEE), (2: 1 ISI, 1 patent)

[A10'10] M. Iacob, G.-D. Andreescu, N. Muntean, Boiler-turbine simulator with real-time capability for dispatcher training using LabView, in Proc. 12th Int. Conf. on Optimization of Electrical and Electronic Equipment (OPTIM 2010), Brasov, Romania, ISSN 1842-0133, ISBN 978-1-4244-7019-8, pp. 864-869, May 2010, 10.1109/OPTIM.2010.5510509, (ISI Proc, WOS:000291967300125, IEEE), (2: 1 ISI, 1 MS)

[A11'10] M. Iacob, C.A. Bejan, G.-D. Andreescu, Supervisory control and data acquisition laboratory, TELFOR Journal, Belgrade, Serbia, ISSN 1821-3251, vol. 2, no. 1, pp. 49-54, Nov. 2010. (Telfor.rs) (2: 1 ISI Proc, 1 other)

[A1'09] I. Boldea, M. C. Paicu, G.-D. Andreescu, F. Blaabjerg, "Active flux" DTFC-SVM sensorless control of IPMSM, IEEE Transactions on Energy Conversion, ISSN 0885-8969, vol. 24, no. 2, pp. 314-322, Jun. 2009, 10.1109/TEC.2009.2016137, (ISI 3.767/17, WOS:000266330700002, IEEE), (117: 44 ISI, 24 ISI Proc, 29 IEEE/Scopus, 9 other, 5 patent, 6 PhD)

[A2'09] M.C. Paicu, I. Boldea, G.-D. Andreescu, F. Blaabjerg, Very low speed performance of active flux based sensorless control: IPMSM vector control versus direct torque and flux control, IET Electric Power Applications, ISSN 1751-8660, vol. 3, no. 6, pp. 551-561, Nov. 2009, 10.1049/iet-epa.2008.0290, (ISI 2.211/17, WOS:000271569800006, IEEE), (53: 16 ISI, 15 ISI Proc, 13 IEEE/INSPEC/Scopus, 2 PhD, 7 other)

[A3'09] I. Boldea, G.-D. Andreescu, C. Rossi, A. Pilati, D. Casadei, Active flux based motion-sensorless vector control of DC-excited synchronous machines, in Proc. 2009 IEEE Energy Conversion Congress and Exposition (ECCE 2009), San Jose, CA, USA, ISBN 978-1-4244-2893-9, pp. 2496-2503, Sep. 2009, 10.1109/ECCE.2009.5316509, (ISI Proc, WOS:000279630101108, IEEE), (21: 3 ISI, 10 ISI Proc, 5 IEEE/Scopus, 1 other, 1 book, 1 PhD)

[A4'09] M. Iacob, G.-D. Andreescu, N. Muntean, SCADA system for a central heating and power plant, in Proc. 5th Int. Symp. on Applied Computational Intelligence and Informatics (SACI '09), Timisoara, Romania, ISSN 978-1-4244-4477-9, pp. 159-164, May 2009, 10.1109/SACI.2009.5136232, (ISI Proc, WOS:000273929400028, IEEE), (10: 1 ISI, 2 ISI Proc, 3 IEEE/Scopus, 3 others, 1 MS)

[A5'09] C.A. Bejan, M. Iacob, G.-D. Andreescu, SCADA automation system laboratory, elements and applications, in Proc. 7th Int. Symp. on Intelligent Systems and Informatics (SISY '09), Subotica, Serbia, ISBN 978-1-4244-5348-1, pp. 181-186, Sep. 2009, 10.1109/SISY.2009.5291169, (ISI Proc, WOS:000276175300035, IEEE), (15: 2 ISI, 2 IEEE/Scopus, 8 other, 1 PhD, 2 MS)

[A6'09] V. Coroban-Schramel, I. Boldea, G.-D. Andreescu, F. Blaabjerg, Active-flux based motion sensorless vector control of biaxial excitation generator/motor for automobiles (BEGA), in Proc. 2009 IEEE Energy Conversion Congress and Exposition (ECCE 2009), San Jose, CA, USA, ISBN 978-1-4244-2893-9, pp. 2131-2138, Sep. 2009, 10.1109/ECCE.2009.5316319, (ISI Proc, WOS:000279630101009, IEEE), (3: 1 ISI Proc, 1 PhD, 1 others)

[A7'09] M.C. Paicu, L. Tutelea, G. Andreescu, F. Blaabjerg, C. Lascu, I. Boldea, Wide speed range sensorless control of PM-RSM via "active flux model", in Proc. 2009 IEEE Energy Conversion Congress and Exposition (ECCE 2009), San Jose, CA, USA, ISBN 978-1-4244-2893-9, pp. 3822-3829, Sep. 2009, 10.1109/ECCE.2009.5316375, (ISI Proc, WOS:000279630101242, IEEE), (4: 2 ISI Proc, 1 Scopus, 1 patent)

[A1'08] G.-D. Andreescu, C.I. Pitic, F. Blaabjerg, I. Boldea, Combined flux observer with signal injection enhancement for wide speed-range sensorless direct torque control of IPMSM drives, IEEE Transactions on Energy Conversion, ISSN 0885-8969, vol. 23, no. 2, pp. 393-402, Jun. 2008, 10.1109/TEC.2007.914386, (ISI 3.767/17, WOS:000255770000006, IEEE), (196: 55 ISI, 57 ISI Proc, 53 IEEE/Scopus, 12 others, 8 PhD, 6 MS, 3 patents)

[A2'08] I. Boldea, M.C. Paicu, G.-D. Andreescu, Active flux concept for motion-sensorless unified AC drives, IEEE Transactions on Power Electronics, ISSN 0885-8993, Vol. 23, No. 5, pp. 2612-2618, Sep. 2008, 10.1109/TPEL.2008.2002394, (ISI 6.812/17, WOS:000261599700040, IEEE), (149: 53 ISI, 43 ISI Proc, 30 IEEE/Scopus, 10 others, 10 PhD, 2 book)

[A3'08] I. Boldea, M. C. Paicu, G.-D. Andreescu, F. Blaabjerg, "Active flux" orientation vector sensorless control of IPMSM, in Proc. 11th Int. Conf. on Optimization of Electrical and Electronic Equipment (OPTIM 2008), Brasov, Romania, ISSN 1842-0133, ISBN 1-4244-1544-6(1), vol. 2A, pp. 161-168, May 2008, 10.1109/OPTIM.2008.4602404, (ISI Proc, WOS:000258258700030, IEEE), (16: 4 ISI, 2 ISI Proc, 4 IEEE, 4 others, 2 PhD)

[A4'08] M. Fatu, R. Teodorescu, I. Boldea, G.-D. Andreescu, F. Blaabjerg, IF starting method with smooth transition to EMF based motion-sensorless vector control of PM synchronous motor/generator, in Proc. 2008 IEEE Power Electronics Specialists Conf. (PESC 2008), Rhodes, Greece, ISSN 0275-9306, ISBN 978-1-4244-1667-7, pp. 1481-1487, Jun. 2008, 10.1109/PESC.2008.4592146, (ISI Proc, WOS:000260398501006, IEEE), (60: 8 ISI, 17 ISI Proc, 14 IEEE/Scopus, 6 others, 12 patent, 3 MS)

[A5'08] M.C. Paicu, L. Tutelea, G.-D. Andreescu, I. Boldea, "Active flux" sensorless vector control of IPMSM for wide speed range, Journal of Electrical Engineering, ISSN 1582-4594, vol. 8, no. 4, pp. 98-105, Dec. 2008, (INSPEC, JEE), (1: 1 INSPEC)

[A7'08] I. Boldea, V. Coroban-Schramel, G.-D. Andreescu, S. Scridon, F. Blaabjerg, BEGA starter/alternator - Vector control implementation and performance for wide speed range at unity power factor, in Proc. 2008 IEEE Industry Applications Soc. Annual Meeting (IAS '08), Edmonton, Alberta, Canada, ISSN 0197-2618, ISBN 978-1-4244-2278-4, pp. 1-8, Oct. 2008, 10.1109/08IAS.2008.180, (ISI Proc, WOS:000263417001130, IEEE), (5: 3 ISI, 2 PhD)

[A1'07] M. Fatu, C. Lascu, G.-D. Andreescu, R. Teodorescu, F. Blaabjerg, I. Boldea, Voltage sags ride-through of motion sensorless controlled PMSG for wind turbines, in Proc. 42nd IAS Annual Meeting. Conf. Rec. of the 2007 IEEE Industry Applications Conf. (IAS 2007), New Orleans, Louisiana, USA, ISSN 0197-2618, ISBN 978-1-4244-1260-0, pp. 171-178, Sep. 2007, 10.1109/07IAS.2007.74, (ISI Proc, WOS:000260446900026, IEEE), (70: 11 ISI, 15 ISI Proc, 22 IEEE/INSPEC/Scopus, 17 others, 1 patent, 3 PhD, 1 MS)

[A1'06] C. Lascu, G.-D. Andreescu, Sliding-mode observer and improved integrator with dc-offset compensation for flux estimation in sensorless controlled-induction motors, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 53, no. 3, pp. 785-794, Jun. 2006, 10.1109/TIE.2006.874275, (ISI 7.05/17, WOS:000237957700009, IEEE), (131: 56 ISI, 28 ISI Proc, 28 IEEE/INSPEC/Scopus, 9 others, 5 PhD, 1 MS, 4 book)

[A2'06] I. Boldea, C.I. Pitic, C. Lascu, G.-D. Andreescu, L. Tutelea, F. Blaabjerg, P. Sandholdt, DTFC-SVM motion-sensorless control of a PM-assisted reluctance synchronous machine as starter-alternator for hybrid electric vehicles, IEEE Transactions on Power Electronics, ISSN 0885-8993, vol. 21, no. 3, pp. 711-719, May 2006, 10.1109/TPEL.2006.872369, (ISI 6.812/17, WOS:000237477600017, IEEE), (59: 15 ISI, 17 ISI Proc, 16 IEEE/Scopus, 6 PhD, 1MS, 2 book, 2 other)

[A3'06] I. Serban, G.-D. Andreescu, L. Tutelea, C. Lascu, F. Blaabjerg, I. Boldea, New state observers and sensorless control of wound rotor induction generator (WRIG) at power grid with experimental characterization, in Proc. IECON 2006 - 32nd Annual Conf. on IEEE Industrial Electronics, Paris, France, ISSN 1553-572X, ISBN 978-1-4244-0135-2, (1-4244-0391-X), pp. 1142-1147, Nov. 2006, 10.1109/IECON.2006.347548, (ISI Proc, WOS:000245905002025, IEEE), (12: 6 ISI, 3 ISI Proc, 2 IEEE/Scopus, 1 MS)

[A4'06] V. Coroban, I. Boldea, G.-D. Andreescu, BEGA - Motor/generator vector control for wide constant power speed range, in Proc. 10th Int. Conf. on Optimization of Electrical and Electronic Equipment (OPTIM 2006), Brasov, Romania, ISBN 978-973-635-705-3, vol. 3, pp. 79-86, May 2006, (ISI Proc, WOS:000256418900015), (2: 1 ISI, 1 IEEE)

[A1'05] C.I. Pitic, G.-D. Andreescu, F. Blaabjerg, I. Boldea, IPMSM motion-sensorless direct torque and flux control, in Proc. IECON 2005. 31st Annual Conf. of IEEE Industrial Electronics Soc., Raleigh, NC, USA, ISSN 1553-572X, ISBN 0-7803-9252-3, pp. 1756-1761, Nov. 2005, 10.1109/IECON.2005.1569171, (ISI Proc, WOS:000236873601150, IEEE), (8: 2 ISI, 5 ISI Proc, 1 IEEE)

[A1'04] G.-D. Andreescu, R. Rabinovici, Torque-speed adaptive observer and inertia identification without current transducers for control of electric drives, Proceedings of the Romanian Academy Series A: Mathematics, Physics, Technical Sciences, Information Science, ISSN: 1454-9069, vol. 5, no. 1, pp. 89-95, Jan./Apr. 2004. (Google Scholar, acad.ro), (3: 1 ISI, 1 ISI Proc. 1 IEEE)

[A1'03] G.-D. Andreescu, A. Popa, Sensorless direct torque control of electrical drives based on flux estimator using integrator with dc-offset correction loop, Iranian Journal of Electrical and Computer Engineering (IJECE), IRIEE-JD, ISSN 1682-0053, vol. 2, no. 2, pp. 126-133, Summer-Fall 2003. (INSPEC, sid) (2: 2 Scopus)

[A1'02] G.D. Andreescu, Adaptive observer for sensorless control of permanent magnet synchronous motor drives, Electric Power Components and Systems, Taylor & Francis, ISSN 1532-5008, vol. 30, no. 2, pp. 107-119, Feb. 2002, 10.1080/153250002753427806, (ISI 1.144/17, WOS:000173504100001, tandfonline), (35: 11 ISI, 9 ISI Proc, 7 IEEE/INSPEC/Scopus/Compendex, 2 PhD, 6 others)

[A2'02] G.D. Andreescu, A. Popa, A. Spilca, Two sliding mode based observers for sensorless control of PMSM drives, Electric Power Components and Systems, Taylor & Francis, ISSN 1532-5008, vol. 30, no. 2, pp. 121-133, Feb. 2002, 10.1080/153250002753427815, (ISI 1.144/17, WOS:000173504100002, tandfonline), (16: 3 ISI, 1 ISI Proc, 7 IEEE/ INSPEC/Springer, 3 others, 2 MS)

[A3'02] G.D. Andreescu, A. Popa, Flux estimator based on integrator with DC-offset correction loop for sensorless direct torque and flux control, in Proc. 15th Int. Conf. on Electrical Machines (ICEM 2002), Bruges, Belgium, ISBN 90-76019-18-5, CDROM Conf. Record: 621.pdf, pp. 1-6, Aug. 2002, (INSPEC), (10: 2 ISI, 4 ISI Proc, 1 IEEE, 2 PhD, 1 other).

[A4'02] G.-D. Andreescu, Flux-estimator with offset correction loop for low speed sensorless control of AC drives, in Proc. 8th Int. Conf. on Optimization of Electrical and Electronic Equipment (OPTIM 2002), Brasov, Romania, ISBN 973-635-004-5, vol. 2, pp. 531-538, May 2002, (1: 1 ISI Proc)

[A1'00] G.D. Andreescu, R. Rabinovici, Observer based torque control with inertia identification using only position transducer for electric drives, in Proc. 14th Int. Conf. on Electrical Machines (ICEM 2000), Espoo, Finland, ISBN 951-22-5097-7, vol.3, pp. 1428-1432, Aug. 2000, (INSPEC, cat.inist), (4: 2 ISI Proc, 1 other, 1 PhD)

[A2'00] G.D. Andreescu, A. Popa, A. Spilca, Sliding mode based observers for sensorless control of PMSM drives - Two comparative case studies, in Proc. 7th Int. Conf. on Optimization of Electrical and Electronic Equipment (OPTIM 2000), Brasov, Romania, ISBN 973-9474-63-2, vol. 3, pp. 609-614, May 2000, (INSPEC), (6: 2 ISI Proc, 2 INSPEC, 1 others, 1 book)

[A3'00] G.D. Andreescu, Adaptive observer for sensorless control of PMSM drives, in Proc. 7th Int. Conf. on Optimization of Electrical and Electronic Equipment (OPTIM 2000), Brasov, Romania, ISBN 973-9474-63-2, vol. 3, pp. 603-608, May 2000, (INSPEC), (1: 1 ISI Proc)

[A1'99] G.D. Andreescu, Position and speed sensorless control of PMSM drives based on adaptive observer, in Proc. 8th European Conf. on Power Electronics and Applications (EPE '99), Lausanne, Switzerland, ISBN 90-75815-04-2, CDROM Conf. Record: 436.pdf, DS1.7/5, pp. 1-10, Sep. 1999, (INSPEC), (39: 3 ISI, 9 ISI Proc, 10 IEEE/ INSPEC, 8 others, 2 patent, 2 book, 5 PhD).

[A2'99] G.D. Andreescu, Estimators in Control of Electric Drives. Applications to Permanent Magnet Synchronous Motors (in Romanian), Editura Orizonturi Universitare, Timisoara, Romania, ISBN 973-9400-49-3, (book 226p.), 1999, (5: 4 ISI Proc, 1 INSPEC)

[A3'99] R. Rabinovici, G.D. Andreescu, Generalized approach of the disturbance torque control, in Proc. 3rd Int. Symp. on Advanced Electromechanical Motion Systems (ELECTROMOTION '99), Patras, Greece, ISBN 88-900615-0-2, vol. 1, pp. 255-260, Jun. 1999, (2: 1 ISI, 1 ISI Proc)

[A1'98] G.D. Andreescu, Robust sliding mode based observer for sensorless control of permanent magnet synchronous motor drives, in Proc. 8th Int. Power Electronics and Motion Control Conf. (PEMC '98), Prague, Czech Rep, ISBN 80-01-01832-6, vol. 6, pp. 172-177, Sep. 1998, (2: 2 book)

[A2'98] G.D. Andreescu, Nonlinear observer for position and speed sensorless control of permanent magnet synchronous motor drives, in Proc. 6th Int. Conf. on Optimization of Electrical and Electronic Equipment (OPTIM '98), Brasov, Romania, ISBN 973-98511-2-6, vol. 2, pp. 473-478, May 1998, 10.1109/OPTIM.1998.707978, (IEEE), (5: 3 INSPEC, 1 others, 1 book)

[A1'96] G.D. Andreescu, Robust direct torque vector control system with stator flux observer for PMSM drives, Brasov, Romania, in Proc. 5th Int. Conf. on Optimization of Electrical and Electronic Equipment (OPTIM '96), Brasov, Romania, ISBN 973-97549-7-x, vol. 5, pp. 1441-1454, May 1996, (10: 2 ISI, 5 INSPEC/Scopus, 3 book) 1404

 

ISI journal citations

1.               F. Toso, D. Da Ru, P. Alotto, S. Bolognani, A moving horizon estimator for the speed and rotor position of a sensorless PMSM drive, IEEE Transactions on Power Electronics, ISSN 0885-8993, in press, 2018. 10.1109/TPEL.2018.2823905 (*Univ of Padova, Italy) (ISI 6.812/17, IEEE) [A2'08]

2.               Y. Yu, D. Chang, X. Zheng, Z. Mi, X. Li, C. Sun, A stator current oriented closed-loop I-f control of sensorless SPMSM with fully unknown parameters for reverse rotation prevention, IEEE Transactions on Power Electronics, ISSN 0885-8993, in press, 2018. 10.1109/TPEL.2017.2780191 (North China Electric Power Univ, Baoding, Hebei, China; Sate Grid Hebei Electric Power Company, Shijiazhuang, China) (ISI 6.812/17, IEEE) [A4'08], [A2'10], [A3'12]

3.               F. Stella, A. Yousefi-Talouki, S. Odhano, G. Pellegrino, P. Zanchetta, An accurate self-commissioning technique for matrix converters applied to sensorless control of synchronous reluctance motor drives, IEEE Journal of Emerging and Selected Topics in Power Electronics, ISSN 2168-6777, in press, 2018. 10.1109/JESTPE.2018.2851142 (Politecnico di Torino, Italy; *Univ of Nottingham, UK) (ISI 5.177/17, IEEE) [A2'08]

4.               X. Xiang, J. Chai, X. Sun, A novel DC motor based on mechanical-electrical hybrid commutation, IEEE Journal of Emerging and Selected Topics in Power Electronics, ISSN 2168-6777, in press, 2018. 10.1109/JESTPE.2017.2767184 (*Tsinghua Univ, Beijing, China) (ISI 5.177/17, IEEE) [A1'12]

5.               H. Mesloub, R. Boumaaraf, M.T. Benchouia, A. Golea, N. Golea, K. Srairi, Comparative study of conventional DTC and DTC_SVM based control of PMSM motor - Simulation and experimental results, Mathematics and Computers in Simulation, ISSN 0378-4754, in press, 2018. 10.1016/j.matcom.2018.06.003 (Biskra Univ, Algeria; Oum El-Bouaghi Univ, Algeria) (ISI 1.476/17, ScDirect) [A2'09]

6.               B. Ning, S. Cheng, B. Yan, F. Zhou, Examination and implementation for direct torque controlled permanent magnet synchronous motor with space vector modulation, Proceedings of the Institution of Mechanical Engineers Part I Journal of Systems and Control Engineering, ISSN 0959-6518, eISSN 2041-3041, in press, 2018. 10.1177/0959651818787006 (Wuhan Univ of Science and Technology, Wuhan, China; *Huazhong Univ of Science and Technology, Wuhan, China) (ISI 0.988/17, sagepub) [A1'08]._

7.               J. Talla, V.Q. Leu, V. Smidl, Z. Peroutka, Adaptive speed control of induction motor drive with inaccurate model, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 65, no. 11, Nov. 2018. 10.1109/TIE.2018.2811362 (Univ of West Bohemia, Pilsen. Czech Rep.) (ISI 7.05/17, IEEE) [A1'06]_

8.               M.S. Zaky, M.K. Metwally, H.Z. Azazi, S.A. Deraz, A new adaptive SMO for speed estimation of sensorless induction motor drives at zero and very low frequencies, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 65, no. 9, pp. 6901-6911, Sep. 2018. 10.1109/TIE.2018.2793206 (Minoufiya Univ, Al Minufya, Egypt) (ISI 7.05/17, WOS:000431397500009, IEEE) [A1'06]

9.               S. Sundeep, B. Singh, Robust position sensorless technique for a PMBLDC motor, IEEE Transactions on Power Electronics, ISSN 0885-8993, vol. 33, no. 8, pp. 6936-6945, Aug. 2018. 10.1109/TPEL.2017.2759761 (Indian Institute of Technology Delhi, New Delhi, India) (ISI 6.812/17, WOS:000431378100041, IEEE) [A1'02]

10.           S.-K. Kim, J.-S. Lee, K.-B. Lee, Robust speed control algorithm with disturbance observer for uncertain PMSM, International Journal of Electronics, Taylor & Francis, ISSN 0020-7217, vol. 105, no. 8, pp. 1300-1318, Aug. 2018. 10.1080/00207217.2018.1440430 (Hanbat National Univ, Daejeon, Korea; Korea Railroad Research Institute, Uiwang, Seoul, Korea; Ajou Univ, Suwon, Korea) (ISI 0.939/17, tandfonline) [A1'08]._

11.           Y. Tang, Y. He, F. Wang, D.H. Lee, J.W. Ahn, R. Kennel, Back-EMF-based sensorless control system of hybrid SRM for high-speed operation, IET Electric Power Applications, ISSN 1751-8660, vol. 12, no. 6, Jul. 2018, 10.1049/iet-epa.2017.0641 (*Technical Univ. of Munich, Germany; Chinese Academy of Sciences, Quanzhou, China; Kyungsung Univ, Busan, Korea) (ISI 2.211/17, IEEE) [A2'10]._

12.           Yongwei Li, Ying Ding, Daoliang Li, Zheng Miao, Automatic carbon dioxide enrichment strategies in the greenhouse: A review, Biosystems Engineering, ISSN 1537-5110, vol. 171, pp. 101-119, Jul. 2018. 10.1016/j.biosystemseng.2018.04.018 (*China Agricultural Univ, Beijing, China) (ISI 2.132/17, ScDirect) [A2'14], [A3'14]_

13.           L.F. Alves, D. Brandao, M.A. Oliveira, A multi-process pilot plant as a didactical tool for the teaching of industrial processes control in electrical engineering course, International Journal of Electrical Engineering Education, ISSN 0020-7209, e-ISSN 2050-4578, Jul. 2018. 10.1177/0020720918787455 (Universidade de Sao Paulo, Brazil) (ISI 0.593/17, sagepub) [A5'09]._

14.           Y. Zhang, Q. Liu, J. Li, M. Sumner, A common ground switched-quasi-Z-source bidirectional DC-DC converter with wide-voltage-gain range for EVS with hybrid energy sources, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 65, no. 6, pp. 5188-5200, Jun. 2018. 10.1109/TIE.2017.2756603 (*Tianjin Univ, China; Nottingham Univ, Ningbo, China; *Univ of Nottingham, UK) (ISI 7.05/17, WOS:000425618900077, IEEE) [A1'17]

15.           S. Roggia, F. Cupertino, C. Gerada, M. Galea, A two-degrees-of-freedom system for wheel traction applications, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 65, no. 6, pp. 4483-4491, Jun. 2018. 10.1109/TIE.2017.2767554 (*Univ Nottingham, Nottingham; Motor Design Ltd, Wrexham, Wales; Politecn Bari, Italy; Univ Nottingham Ningbo China, Ningbo, China) (ISI 7.05/17, WOS:000425618900006, IEEE) [A4'08]

16.           J. Hong, S. Laflamme, J. Dodson, Study of input space for state estimation of high-rate dynamics, Structural Control & Health Monitoring, ISSN 1545-2255, eISSN 1545-2263, vol. 25, no. 6, Jun. 2018, 10.1002/stc.2159 (Appl Res Associates, Emerald Coast Div, Niceville, FL, USA; Iowa State Univ, Ames, IA, USA; US Air Force, Res Lab, Eglin AFB, FL, USA) (ISI 3.622/17, WOS:000432035200004, onlinelibrary.wiley) [A1'06].

17.           Ambrish Devanshu, Madhusudan Singh, Narendra Kumar, Sliding mode control of induction motor drive based on feedback linearization, IETE Journal of Research, ISSN 0377-2063, e-ISBN 0974-780X, Jun. 2018. 10.1080/03772063.2018.1486743 (Delhi Technological Univ, Delhi, India) (ISI 0.829/17, tandfonline) [A1'06]._

18.           C. Zhang, P. Li, Z. Kan, X. Chai, X. Guo, Integrated half-bridge CLLC bidirectional converter for energy storage systems, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 65, no. 5, pp. 3879-3889, May 2018. 10.1109/TIE.2017.2758741 (Yanshan Univ, Hebei, China) (ISI 7.05/17, WOS:000422930000024, IEEE) [A1'17]

19.           C. Gu, XL. Wang, XQ. Shi, ZQ Deng, A PLL-based novel commutation correction strategy for a high-speed brushless dc motor sensorless drive system, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 65, no. 5, pp. 3752-3762, May 2018. 10.1109/TIE.2017.2760845 (*Nanjing Univ of Aeronautics and Astronautics, China) (ISI 7.05/17, WOS:000422930000012, IEEE) [A1'12]

20.           Y. Zhang, Y. Gao, J. Li, M. Sumner, Interleaved switched-capacitor bidirectional DC-DC converter with wide voltage-gain range for energy storage systems, IEEE Transactions on Power Electronics, ISSN 0885-8993, vol. 33, no. 5, pp. 3852-3869, May 2018. 10.1109/TPEL.2017.2719402 (*Tianjin Univ, China; Univ of Nottingham, Ningbo, China; *Univ of Nottingham, UK) (ISI 6.812/17, WOS:000424832200018, IEEE) [A1'17]

21.           Q. Lu, X. Zhu, L. Quan, Y. Zuo, S. Du, A rotor position estimation scheme with harmonic ripple attenuation for sensorless controlled permanent magnet synchronous motors, IET Electric Power Applications, e-ISSN 1751-8679, ISSN 1751-8660, May 2018. 10.1109/TIE.2018.2793206 (Jiangsu Univ., Zhenjiang, China; Huaiyin Institute of Technology, Huai'an, China) (ISI 2.211/17, IET) [A1'15]_.

22.           J. Yan, H. Wang, S. Huang, Y. Lan, Disturbance observer-based backstepping control of PMSM for the mine traction electric locomotive, Mathematical Problems in Engineering, Hindawi Pub., UK, ISSN 1024-123X, eISSN 1563-5147, no. 9, 10p, May 2018. 10.1155/2018/7253210 (*Hunan Univ., Changsha, Hunan, China; Hunan Institute of Engineering, Xiangtan, Hunan, China; Xiangtan Univ., Xiangtan, China) (ISI 1.145/17, WOS:000433316500001, hindawi-pdf) [A1'08]

23.           M.A. Setiawan, A. Abu-Siada, F. Shahnia, A new technique for simultaneous load current sharing and voltage regulation in DC microgrids, IEEE Transactions on Industrial Informatics, ISSN 1551-3203, vol. 14, no. 4, pp. 1403-1414, Apr. 2018. 10.1109/TII.2017.2761914 (Politeknik Manufaktur Negeri Bangka Belitung, Sungailiat, Indonesia; *Curtin Univ, Perth, WA, Australia; Murdoch Univ, Perth, WA, Australia) (ISI 5.43/17, WOS:000429266400010, IEEE) [A1'17]

24.           J.B. Park, X. Wang, Sensorless direct torque control of surface-mounted permanent magnet synchronous motors with nonlinear Kalman filtering, Energies, ISSN 1996-1073, vol. 11, no. 4, Apr. 2018. 10.3390/en11040969 (Southern Illinois Univ., Edwardsville, IL, USA) (ISI 2.676/17, WOS:000434703400280, mdpi) [A1'09], [A2'09]

25.           L. Chen, S. Du, D. Xu, Y. He, M. Liang, Sliding mode control based on disturbance observer for greenhouse climate systems, Mathematical Problems in Engineering, Hindawi Pub., UK, ISSN 1024-123X, eISSN 1563-5147, 4/8, 8p, Apr. 2018. 10.1155/2018/2071585 (*China Agricultural Univ, Beijing, China) (ISI 1.145/17, WOS:000430697300001, hindawi-pdf) [A2'14], [A4'12]

26.           T.S. Singh, A.K. Jain, Maximum power per VA control of vector controlled interior permanent magnet motor, Sadhana - Academy Proceedings in Engineering Sciences, Springer India, ISSN 0256-2499, eISSN 0973-7677, vol. 43, no. 4, pp. 1-12, Apr. 2018, 10.1007/s12046-018-0817-y (Indian Institute of Technology Delhi, New Delhi, India) (ISI 0.465/16, WOS:000430364500008, link.springer) [A1'13]

27.           S.-K. Kim, K.-B. Lee, Robust offset-free speed tracking controller of permanent magnet synchronous generator for wind power generation applications, Electronics, ISSN 2079-9292, vol. 7, no. 4, pp. 1-13 Apr. 2018. 10.3390/electronics7040048 (Hanbat National Univ, Daejeon, Korea; Ajou Univ, Suwon, Korea) (ISI-SCIE, mdpi) [A1'08]_

28.           Y. Lee, S.K. Sul, Model-based sensorless control of an IPMSM with enhanced robustness against load disturbances based on position and speed estimator using a speed error, IEEE Transactions on Industry Applications, ISSN 0093-9994, vol. 54, no. 2, pp. 1448-1459, Mar./Apr. 2018, 10.1109/TIA.2017.2777390 (Seoul National Univ, Seoul, Korea) (ISI 2.743/17, WOS:000427865600046, IEEE) [A2'08]

29.           G. da Cunha, A.J. Rossa, J.A. Alves, E. Cardoso, Control of permanent magnet synchronous machines for subsea applications, IEEE Transactions on Industry Applications, ISSN 0093-9994, vol. 54, no. 2, pp. 1899-1905, Mar./Apr. 2018, 10.1109/TIA.2017.2785764 (R&D Drives, WEG Drives and Controls, Santa Catarina, Brazil; TechnipFMC, Brazil) (ISI 2.743/17, WOS:000427865600091, IEEE) [A3'12]

30.           D. Uzel, Z. Peroutka, T. Kosan, K. Zeman, Self-sensing control of wound rotor synchronous motor drive for mine hoist, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 65, no. 3, pp. 2009-2017, Mar. 2018. 10.1109/TIE.2017.2740818 (Univ West Bohemia, Pilsen, Czech Rep.; Zapadoceska Univ, Pilsen, Czech Rep.) (ISI 7.05/17, WOS:000418643200011, IEEE) [A3'09]

31.           H.S. Zad, T.I. Khan, I. Lazoglu, Design and adaptive sliding mode control of hybrid magnetic bearings, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 65, no. 3, pp. 2537-2547, Mar. 2018. 10.1109/TIE.2017.2739682 (Koc Univ, Istanbul, Turkey) (ISI 7.05/17, WOS:000418643200061, IEEE) [A1'06]

32.           E. Dehghan-Azad, S. Gadoue, D. Atkinson, H. Slater, P. Barrass, F. Blaabjerg, Sensorless control of IM based on stator-voltage MRAS for Limp-home EV applications, IEEE Transactions on Power Electronics, ISSN 0885-8993, vol. 33, no. 3, pp. 1911-1921, Mar. 2018. 10.1109/TPEL.2017.2695259 (*Newcastle Univ, UK; Alexandria Univ, Egypt; *Aalborg Univ, Denmark) (ISI 6.812/17, WOS:000417819300009, IEEE) [A2'08]

33.           A. Yousefi-Talouki, P. Pescetto, G. Pellegrino, I. Boldea, Combined active flux and high-frequency injection methods for sensorless direct-flux vector control of synchronous reluctance machines, IEEE Transactions on Power Electronics, ISSN 0885-8993, vol. 33, no. 3, pp. 2447-2457, Mar. 2018. 10.1109/TPEL.2017.2697209 (Politecnico di Torino, Italy; Univ Politehnica of Timisoara, Romania) (ISI 6.812/17, WOS:000417819300051, IEEE) [A1'08], [A2'08], [A1'09]

34.           U.K. Mudhigollam, U. Choudhury, K. Hatua, Wide regulated series hybrid excitation alternator, IET Electric Power Applications, ISSN 1751-8660, vol. 12, no. 3, pp. 439-446, Mar. 2018, 10.1049/iet-epa.2017.0452 (BHEL Corporate R&D, Hyderabad, India; IIT Madras, Chennai, India) (ISI 2.211/17, WOS:000427928200018, IET) [A1'10].

35.           Y. Zhang, Y. Gao, J. Li, M. Sumner, A wide voltage-gain range asymmetric H-bridge bidirectional DC-DC converter with a common ground for energy storage systems, Journal of Power Electronics, ISSN 1598-2092, vol. 18, no. 2, pp. 343-355, Mar. 2018. 10.6113/JPE.2018.18.2.343 (*Tianjin Univ, China; Univ of Nottingham, Ningbo, China; *Univ of Nottingham, Nottingham, UK) (ISI 1.023/17, WOS:000428026300003, jpels) [A1'17]

36.           J. Choi, H.-S. Seol, J. Lee, IPMSM design for sensorless control considering magnetic neutral point shift according to magnetic saturation, Journal of Electrical Engineering & Technology, ISSN 1975-0102, ISSN-e 2093-7423, vol. 13, no. 2, pp. 752-760, Mar. 2018. 10.5370/JEET.2018.13.2.752 (ISI-SCIE, WOS:000428478300024, jeet.or.kr) (*Hanyang Univ, Korea) [A2'09]

37.           R. Vepa, Modeling and dynamics of HTS motors for aircraft electric propulsion, Aerospace, ISSN 2226-4310, vol. 5, no. 1, pp. 1-14, Mar. 2018. 10.3390/aerospace5010021 (*Queen Mary Univ of London, UK) (ISI-ESCI, WOS:000428501900021, mdpi) [A1'13]

38.           O. Otkun, A. Sefa Akpınar, An experimental study on the effect of thrust force on motor performance in linear permanent magnet synchronous motors, Electric Power Components and Systems, Taylor & Francis, ISSN 1532-5008, eISSN 1532-5016, vol. 45, no. 18, pp. 2017-2024, Feb. 2018, 10.1080/15325008.2017.1380730 (Istanbul Esenyurt Univ, Istanbul, Turkey; Karadeniz Technical Univ, Trabzon, Turkey) (ISI 1.144/17, WOS:000425691400005, tandfonline) [A1'02].

39.           M.A. Hannan, J.A. Ali, A. Mohamed, A. Hussain, Optimization techniques to enhance the performance of induction motor drives: A review, Renewable and Sustainable Energy Reviews, ISSN 1364-0321, vol. 81, part 2, pp. 1611-1626, Jan. 2018, 10.1016/j.rser.2017.05.240 (Univ Tenaga Nasional, Kajang, Malaysia; General Company of Electricity Production Middle Region, Ministry of Electricity, Iraq; Univ Kebangsaan Malaysia, Malaysia) (ISI 9.184/17, WOS:000417078200001, ScDirect) [A2'09], [A2'10], [A1'13], [A4'13]

40.           S. Bolognani, L. Ortombina, F. Tinazzi, M. Zigliotto, Model sensitivity of fundamental-frequency-based position estimators for sensorless PM and reluctance synchronous motor drives, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 65, no. 1, pp. 77-85, Jan. 2018. 10.1109/TIE.2017.2716902 (*Univ of Padova, Italy) (ISI 7.05/17, WOS:000416221000008, IEEE) [A2'08]

41.           R.H. Kumar, A. Iqbal, N.C. Lenin, Review of recent advancements of direct torque control in induction motor drives - A decade of progress, IET Power Electronics, ISSN 1755-4535, eISSN 1755-4543, vol. 11, no. 1, pp. 1-15, Jan. 2018, 10.1049/iet-pel.2017.0252 (VIT Univ, Chennai, India; Qatar Univ, Doha, Qatar) (ISI 2.267/17, WOS:000423563900001, IEEE) [A1'06].

42.           V.F.M.B. Melo, C.B. Jacobina, N. Rocha, Fault tolerance performance of dual-inverter-based six-phase drive system under single-, two-, and three-phase open-circuit fault operation, IET Power Electronics, ISSN 1755-4535, eISSN 1755-4543, vol. 11, no. 1, pp. 212-220, Jan. 2018, 10.1049/iet-pel.2016.0724 (Fed. Univ Campina Grande (UFCG), Campina Grande, Paraiba, Brazil; Fed. Univ Paraba (UFPB), Joao Pessoa, Paraiba, Brazil) (ISI 2.267/17, WOS:000423563900024, IEEE) [A1'13].

43.           J. Hong, S. Laflamme, J. Dodson, B. Joyce, Introduction to state estimation of high-rate system dynamics, Sensors, ISSN 1424-8220, vol. 18, no. 1, pp. 1-16, Jan. 2018. 10.3390/s18010217 (Emerald Coast Division, Niceville, FL, USA; *Iowa State Univ, Ames, IA, USA; Eglin Air Force Base, FL, USA; Univ of Dayton Research Institution, Dayton, OH, USA) (ISI 2.475/17, WOS:000423286300216, mdpi) [A1'06]

44.           A. Andersson, T. Thiringer, Motion sensorless IPMSM control using linear moving horizon estimation with Luenberger observer state feedback, IEEE Transactions on Transportation Electrification, ISSN 2332-7782, vol. 4, no. 2, pp. 464-473, Jan. 2018. 10.1109/TTE.2018.2790709 (Volvo Car Group, Gothenburg, Sweden; *Chalmers Univ of Technology, Gothenburg, Sweden) (ISI-SCIE, WOS:000434447400011, IEEE) [A1'08], [A2'08].

45.           A.S. Khouzani, B.M. Dehkordi, A. Kiyoumarsi, S. Farhangi, A control approach for small-scale PMSG-based WECS in the whole wind speed range, IEEE Transactions on Power Electronics, ISSN 0885-8993, vol. 32, no. 12, pp. 9117-9130, Dec. 2017. 10.1109/TPEL.2017.2655940 (Univ of Isfahan, Isfahan, Iran) (ISI 6.812/17, WOS:000406841300018, IEEE) [A1'08]

46.           P. Wang, F. Liu, X. Zha, J. Gong, F. Zhu, X. Xiong, A regenerative hexagonal cascaded multilevel converter for two-motor asynchronous drive, IEEE Journal of Emerging and Selected Topics in Power Electronics, ISSN 2168-6777, vol. 5, no. 4, pp. 1687-1699, Dec. 2017. 10.1109/JESTPE.2017.2713043 (*Wuhan Univ, Wuhan, China) (ISI 5.177/17, WOS:000414068300021, IEEE) [A1'13]

47.           M. Orsag, C. Korpela, S. Bogdan, P. Oh, Dexterous aerial robots-Mobile manipulation using unmanned aerial systems, IEEE Transactions on Robotics, ISSN 1552-3098, vol. 33, no. 6, pp. 1453-1466, Dec. 2017. 10.1109/TRO.2017.2750693 (Univ of Zagreb, Croatia; United States Military Academy, West Point, NY, USA; Univ of Nevada, Las Vegas, NV, USA) (ISI 4.264/17, WOS:000417841500013, IEEE) [A1'12]

48.           Z. Waradzyn, R. Stala, A. Mondzik, A. Penczek, A. Skala, S. Pirog, Efficiency analysis of MOSFET-based air-choke resonant DC-DC step-up switched-capacitor voltage multipliers, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 64, no. 11, pp. 8728-8738, Nov. 2017. 10.1109/TIE.2017.2698368 (AGH Univ of Science and Technology, Krakow, Poland) (ISI 7.05/17, WOS:000412579300032, IEEE) [A1'17]

49.           D. Su, C. Zhang, Y. Dong, Finite-state model predictive current control for surface-mounted permanent magnet synchronous motors based on current locus, IEEE Access, ISSN 2169-3536, ISSN-e 2169-3536, vol. 5, pp. 27366-27375, Nov. 2017. 10.1109/ACCESS.2017.2771418 (Beijing Institute of Technology, China) (ISI 3.557/17, WOS:000418881100110, IEEE) [A2'10]

50.           H. Qiu, W. Yu, W. Wang, Y. Mu, W Li, C. Yang, The research on correlated sensitivity factors of flux-regulation capability for axial-radial flux-type synchronous motor with hybrid poles, IETE Journal of Research, ISSN 0377-2063, e-ISBN 0974-780X, Nov. 2017. 10.1080/03772063.2017.1384332 (Zhengzhou Univ of Light Industry, China; Zhengzhou Power Supply Company of State Grid, Zhengzhou, China; Beijing Jiaotong Univ, Beijing, China) (ISI 0.829/17, tandfonline) [A7'08], [A1'11]._

51.           Risfendra, Y.-S. Kung, M.-S. Wang, L.-C. Huang, Realization of a sensorless speed controller for permanent magnet synchronous motor drives based on field programmable gate array technology, Advances in Mechanical Engineering, ISSN 1687-8140, vol. 9, no. 11, pp. 1-19, Nov. 2017. 10.1177/1687814017734113 (Southern Taiwan Univ of Science and Technology, Tainan, Taiwan; Universitas Negeri Padang, Padang, Indonesia; Industrial Technology Research Institute, Hsinchu, Taiwan) (ISI 0.848/17, WOS:000414866700001, journals.sagepub.com-pdf) [A4'08]

52.           A. Sivaprakasam, A new approach to reduce torque ripple and noise in twelve-sector based direct torque controller fed permanent magnet synchronous motor drive: simulation and experimental results, Noise Control Engineering Journal, ISSN 0736-2501, vol. 65, no. 6, pp. 531-548, Nov. 2017. 10.3397/1/376567 (Anna Univ, Chennai, Tamil Nadu, India) (ISI 0.829/17, WOS:000423336700003, ingentaconnect) [A1'08].

53.           Y. Li, X. Liu, Z. Liu, Analysis and design of an interior permanent magnet synchronous machine with double-layer PMs for electric vehicles based on multi-physics fields, COMPEL-The international journal for computation and mathematics in electrical and electronic engineering, ISSN 0332-1649, Nov. 2017. 10.1108/COMPEL-09-2016-0425 (JiangXi Univ of Science and Technology, Ganzhou, China) (ISI 0.534/17, WOS:000423194100006, Emerald) [A2'09].

54.           S. Makino, M. Kakihara, Y. Takase, M. Takaki, T. Shikayama, M. Ohto, T. Higuchi, T. Abe, Development of a stator-magnetless linear synchronous motor for sensorless control, IEEE Transactions on Industry Applications, ISSN 0093-9994, vol. 53, no. 5, pp. 4559-4568, Sep./Oct. 2017, 1010.1109/TIA.2017.2710942 (Yaskawa Motor Corp, Kitakyushu, Fukuoka, Japan; Nagasaki Univ, Nagasaki, Japan) (ISI 2.743/17, WOS:000411757600041, IEEE) [A1'09]

55.           C.-S. Park, J.S. Lee, A torque error compensation algorithm for surface mounted permanent magnet synchronous machines with respect to magnet temperature variations, Energies, ISSN 1996-1073, vol. 10, no. 9, Sep. 2017. 10.3390/en10091365 (Kyungnam Univ, South Korea; Chonbuk Natl. Univ, South Korea) (ISI 2.676/17, WOS:000411225200121, mdpi) [A1'09]

56.           X. Yang, P. Wen, Y. Xue, T.Q. Zheng, Y. Wang, Super capacitor energy storage based MMC for energy harvesting in mine hoist application, Energies, ISSN 1996-1073, vol. 10, no. 9, pp. 1-11, Sept. 2017, 10.3390/en10091428 (Beijing Jiaotong Univ, China; Tianshui Electric Drive Research Institute, Tianshui, China) (ISI 2.676/17, WOS:000411225200183, mdpi) [A2'08], [A1'13]

57.           X.G. Zhang, K.Q. Wang, B.S. Hou, Low parameter sensitivity deadbeat direct torque control for surface mounted permanent magnet synchronous motors, Journal of Power Electronics, ISSN 1598-2092, vol. 17, no. 5, pp. 1211-1222, Sep. 2017. 10.6113/JPE.2017.17.5.1211 (North China Univ of Technology, Beijing, China) (ISI 1.023/17, WOS:000410871800009, jpe-pdf) [A1'09]

58.           Y. Sun, M. Preindl, S. Sirouspour, A. Emadi, Unified wide-speed sensorless scheme using nonlinear optimization for IPMSM drives, IEEE Transactions on Power Electronics, ISSN 0885-8993, vol. 32, no. 8, pp. 6308-6322, Aug. 2017. 10.1109/TPEL.2016.2569140 (*McMaster Univ, Hamilton, ON, Canada; *Columbia Univ, New York, NY, USA) (ISI 6.812/17, WOS:000398952000040, IEEE) [A1'08]

59.           A. Shinohara, Y. Inoue, S. Morimoto, M. Sanada, Maximum torque per ampere control in stator flux linkage synchronous frame for DTC-based PMSM drives without using q-axis inductance, IEEE Transactions on Industry Applications, ISSN 0093-9994, vol. 53, no. 4, pp. 3663-3671, Jul./Aug. 2017, 10.1109/TIA.2017.2686800 (*Osaka Prefecture Univ, Japan) (ISI 2.743/17, WOS:000407137700048, IEEE) [A2'08]

60.           A. Yousefi-Talouki, P. Pescetto, G. Pellegrino, Sensorless direct flux vector control of synchronous reluctance motors including standstill, MTPA, and flux weakening, IEEE Transactions on Industry Applications, ISSN 0093-9994, vol. 53, no. 4, pp. 3598-3608, Jul./Aug. 2017, 10.1109/TIA.2017.2679689 (Politecnico di Torino, Italy) (ISI 2.743/17, WOS:000407137700042, IEEE) [A2'06], [A1'08]

61.           Y. Zhang, D. Xu, J. Liu, S. Gao, W. Xu, Performance improvement of model-predictive current control of permanent magnet synchronous motor drives, IEEE Transactions on Industry Applications, ISSN 0093-9994, vol. 53, no. 4, pp. 3683-3695, Jul./Aug. 2017, 10.1109/TIA.2017.2690998 (North China Univ of Technology, Beijing, China) (ISI 2.743/17, WOS:000407137700050, IEEE) [A2'08]

62.           G. Liu, S. Chen, S. Zheng, X. Song, Sensorless low-current start-up strategy of 100-kW BLDC motor with small inductance, IEEE Transactions on Industrial Informatics, ISSN 1551-3203, vol. 13, no. 3, pp. 1131-1140, Jun. 2017, 10.1109/TII.2016.2607158 (KAIST, Daejeon, Korea) (ISI 5.43/17, WOS:000402929700020, IEEE) [A1'12]

63.           Ali H. Almarhoon, Z.Q. Zhu, Pelin Xu, Improved pulsating signal injection using zero-sequence carrier voltage for sensorless control of dual three-phase PMSM, IEEE Transactions on Energy Conversion, ISSN 0885-8969, vol. 32, no. 2, pp. 436-446, Jun. 2017, 10.1109/TEC.2017.2657743 (*Univ of Sheffield, UK) (ISI 3.767/17, WOS:000402141500004, IEEE) [A1'06], [A1'09].

64.           S. Lin, W. Zhang, An adaptive sliding-mode observer with a tangent function-based PLL structure for position sensorless PMSM drives, International Journal of Electrical Power & Energy Systems, Elsevier, ISSN 0142-0615, vol. 88, pp. 63-74, Jun. 2017, 10.1016/j.ijepes.2016.12.006 (*Shanghai Jiao Tong Univ, Shanghai, China) (ISI 3.61/17, WOS:000393932400007, ScDirect) [A4'08]

65.           A. Shahzad, R.j Landry, M. Lee, N. Xiong, J. Lee, C. Lee, A new cellular architecture for information retrieval from sensor networks through embedded service and security protocols, Sensors, ISSN 1424-8220, vol. 16, no. 6, pp. 1-23, Jun. 2016, 10.3390/s16060821 (Ecole de Technologie Superieure, Montreal, Canada; Chonbuk National Univ, Chonbuk, Korea; Univ of Shanghai for Science and Technology, Shanghai, China; Southwestern Oklahoma State Univ, Oklahoma, USA; WonKwang Univ, Iksan, Korea; Seoul National Univ of Science and Technology (SeoulTech), Seoul, Korea) (ISI 2.475/17, WOS:000378756500069, mdpi) [A4'11]

66.           C. Zhong, Y. Lin, Model reference adaptive control (MRAC)-based parameter identification applied to surface-mounted permanent magnet synchronous motor, International Journal of Electronics, Taylor & Francis, ISSN 0020-7217, vol. 104, no. 11, pp. 1854-1873, Jun. 2017. 10.1080/00207217.2017.1329946 (*Dalian Univ of Technology, Dalian, Liaoning, China) (ISI 0.939/17, WOS:000407507400006, tandfonline) [A1'15].

67.           S. Dolatabadi, S. Tohidi, A review on position sensorless methods for wind generators, International Journal of Renewable Energy Research, ISSN 1309-0127, vol. 7, no. 2, pp. 476-488, Jun. 2017, (Univ of Tabriz, Tabriz, Iran) (ISI-ESCI 0.260/16, WOS:000404270700002, ijrer-pdf) [A3'06], [A1'07]

68.           K.-H. Zhao, C.-F. Zhang, J. He, X.-F. Li, J.-H. Feng, J.-H. Liu, T. Li, Accurate torque-sensorless control approach for interior permanent magnet synchronous machine based on cascaded sliding mode observer, Journal of Engineering-JOE, eISSN 2051-3305, IET, Jun. 2017, 10.1049/joe.2017.0160 (Hunan Univ Technol., Zhuzhou, China; CRRC Zhuzhou Inst Co Ltd, Zhuzhou, China) (ISI-ESCI, WOS:000403830500005, theiet) [A1'09], [A1'14]

69.           S.-K. Sul, Y.-C. Kwon, Y. Lee, Sensorless control of IPMSM for last 10 years and next 5 years, CES Transactions on Electrical Machines and Systems, ISSN 2096-3564, vol. 1, no. 2, pp. 91-99, Jun. 2017, 10.23919/TEMS.2017.7961290 (*Seoul National Univ, Korea) (ISI, IEEE) [A2'08]__

70.           J. Liu, T.A. Nondahl, P.B. Schmidt, S. Royak, T.M. Rowan, Generalized stability control for open-loop operation of motor drives, IEEE Transactions on Industry Applications, ISSN 0093-9994, vol. 53, no. 3, pp. 2517-2525, May-Jun. 2017, 10.1109/TIA.2017.2661249 (Rockwell Automation, Milwaukee, WI, USA) (ISI 2.743/17, WOS:000402062600081, IEEE) [A4'10], [A3'12]

71.           P. Castro, M.A. Valenzuela, Robust estimation and protection of locked charge in grinding mills, IEEE Transactions on Industry Applications, ISSN 0093-9994, vol. 53, no. 3, pp, 2608-2620, May-Jun. 2017, 10.1109/TIA.2017.2654998 (Univ of Concepcion, Concepcion, Chile) (ISI 2.743/17, WOS:000402062600090, IEEE) [A3'09]

72.           Q. Tang, A. Shen, X. Luo, J. Xu, PMSM sensorless control by injecting HF pulsating carrier signal into abc frame, IEEE Transactions on Power Electronics, ISSN 0885-8993, vol. 32, no. 5, pp. 3767-3776, May 2017. 10.1109/TPEL.2016.2583787 (*Huazhong Univ of Science and Technology, Wuhan, China) (ISI 6.812/17, WOS:000395543400043, IEEE) [A1'06]

73.           F. Wang, Z. Zhang, J. Wang, J. Rodriguez, Sensorless model-based PCC for induction machine, IET Electric Power Applications, ISSN 1751-8660, vol. 11, no. 5, pp. 885-892, May 2017, 10.1049/iet-epa.2016.0220 (Chinese Academy of Sciences, Quanzhou, China; *Technical Univ of Munich, Germany; Univ Andres Bello, Santiago, Chile) (ISI 2.211/17, WOS:000401621200023, IEEE) [A1'06]

74.           J. Yang, W.-H. Chen, S. Li, L. Guo, Y. Yan, Disturbance/uncertainty estimation and attenuation techniques in PMSM drives - A survey, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 64, no. 4, pp. 3273-3285, Apr. 2017, 10.1109/TIE.2016.2583412 (*Southeast Univ, Nanjing, China; Loughborough Univ, Loughborough, UK; *Beihang Univ, Beijing, China) (ISI 7.05/17, WOS:000397770200075, IEEE) [A1'12]

75.           G. Borocci, F.G. Capponi, G. De Donato, F. Caricchi, Closed-loop, flux-weakening control of hybrid-excitation synchronous machine drives, IEEE Transactions on Industry Applications, ISSN 0093-9994, vol. 53, no. 2, pp. 1116-1126, Apr. 2017. 10.1109/TIA.2016.2639031 (*Univ of Rome "La Sapienza", Rome, Italy) (ISI 2.743/17, WOS:000398745400033, IEEE) [A1'10]

76.           H. Pairo, A. Shoulaie, Operating region and maximum attainable speed of energy-efficient control methods of interior permanent-magnet synchronous motors, IET Power Electronics, ISSN 1755-4535, vol. 10, no. 5, pp. 555-567, Apr. 2017, 10.1049/iet-pel.2016.0064 (Iran Univ of Science and Technology, Tehran, Iran) (ISI 2.267/17, WOS:000399751800006, IEEE) [A1'10], [A1'14]

77.           L. Pugi, E. Galardi, C. Carcasci, N. Lucchesi, Hardware-in-the-loop testing of bypass valve actuation system: Design and validation of a simplified real time model, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, ISSN 0954-4089, vol. 231, no. 2, pp. 212-235, Apr. 2017. 10.1177/0954408915589513 (*Univ of Florence, Italy) (ISI 1.211/17, WOS:000396206300015, sagepub) [A1'11]

78.           E.I. El-Madbouly, I.A. Hameed, M.I. Abdo, Reconfigurable adaptive fuzzy fault-hiding control for greenhouse climate control system, International Journal of Automation and Control, ISSN 1740-7516, vol. 11, no. 2, pp. 164-187, Apr. 2017, 10.1504/IJAAC.2017.083297 (Menofia Univ, Menouf, Egypt; *Norwegian Univ of Science and Technology (NTNU) Alesund, Alesund, Norway) (ISI-ESCI, WOS:000404016800004, Scopus, inderscience) [A4'12]

79.           C. Zhang, G. Wu, J. He, K. Zhao, Sliding observer based demagnetization fault-tolerant control in permanent magnet synchronous motors, Journal of Engineering-JOE, ISSN 2051-3305, IET, vol. 24, Apr. 2017, 10.1049/joe.2016.0355 (Hunan Univ of Technology, Zhuzhou, Hunan, China) (ISI-ESCI, WOS:000400121100001, theiet) [A1'09]

80.           A. Shinohara, Y. Inoue, S. Morimoto, M. Sanada, Direct calculation method of reference flux linkage for maximum torque per ampere control in DTC-based IPMSM drives, IEEE Transactions on Power Electronics, ISSN 0885-8993, vol. 32, no. 3, pp. 2114-2122, Mar. 2017. 10.1109/TPEL.2016.2569140 (Osaka Prefecture Univ, Japan) (ISI 6.812/17, WOS:000390674700040, IEEE) [A2'08]

81.           D.Y. Han, K.B. Lee, Simple sensorless control of interior permanent magnet synchronous motor using PLL based on extended emf, Journal of Electrical Engineering & Technology, ISSN 1975-0102, vol. 12, no. 2, pp. 711-717, Mar. 2017, 10.5370/JEET.2017.12.1.1921 (LG Electronics, Seoul, Korea; Ajou Univ, Korea) (ISI 0.597/17, WOS:000401717800024, jeet.or.kr-pdf) [A1'08]

82.           D. Da Ru, M. Morandin, S. Bolognani, M. Castiello, Test bench for emulating a variety of salient rotor electrical propulsion machines with a single permanent-magnet synchronous machine drive, IET Electrical Systems in Transportation, ISSN 2042-9738, eISSN-2042-9746, vol. 7, no. 1, pp. 55-64, Mar. 2017, 10.1049/iet-est.2016.0026 (*Univ of Padova, Italy) (ISI-ESCI, WOS:000409419100008, IEEE) [A2'08]

83.           S.K. Kim, J.S. Lee, K.B. Lee, Self-tuning adaptive speed controller for permanent magnet synchronous motor, IEEE Transactions on Power Electronics, ISSN 0885-8993, vol. 32, no. 2, pp. 1493-1506, Feb. 2017. 10.1109/TPEL.2016.2543222 (LG Electronics, Seoul, Korea; Korea Railroad Research Institute, Seoul, Korea; Ajou Univ, Suwon, Korea) (ISI 6.812/17, WOS:000388867300053, IEEE) [A1'08]

84.           C.C. Peng, Nonlinear integral type observer design for state estimation and unknown input reconstruction, Applied Sciences-Basel, ISSN 2076-3417, vol. 7, no. 1, pp. 1-18, Jan. 2017, 10.3390/app7010067 (*National Cheng Kung Univ, Tainan, Taiwan) (ISI 1.689/17, WOS:000395485900066, IEEE) [A1'06]

85.           Y. Mao, J. Yang, D. Yin, Y. Chen, Sensorless interior permanent magnet synchronous motor control with rotational inertia adjustment, Advances in Mechanical Engineering, eISSN 1687-8140, ISSN 1687-8132, vol. 9, no. 1, pp. 1-11, Jan. 2017, 10.1177/1687814016684745 (*Zhejiang Univ, Hangzhou, China; *Nanjing Univ of Science and Technology, Nanjing, China) (ISI 0.848/17, WOS:000391727400022, sagepub) [A2'08]

86.           J. Kim, S. Choi, K. Cho, K. Nam, Position estimation using linear Hall sensors for permanent magnet linear motor systems, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 63, no. 12, pp. 7644-7652, Dec. 2016, 10.1109/TIE.2016.2591899 (*Korea Advanced Institute of Science and Technology, Daejeon, Korea; Samsung Electronics, Hwaseong-si, Korea; Yeungnam Univ, Gyeongsan, Korea) (ISI 7.05/17, WOS:000388623300033, IEEE) [A2'08]

87.           A. Maher, E. Kamel, F. Enrico, I. Atif, M. Abdelkader, An intelligent system for the climate control and energy savings in agricultural greenhouses, Energy Efficiency, ISSN 1570-646X, vol. 9, no. 6, pp. 1241-1255, Dec. 2016, 10.1007/s12053-015-9421-8 (Tunis El Manar Univ, Tunisia; *Univ of Torino, Italy; College of Engineering Qatar Univ, Doha-Qatar) (ISI 1.634/17, WOS:000385154300002, SpringerLink) [A4'12]

88.           F. Zhao, H. Lin, B.I. Kwon, Performance evaluation of single-phase and two-phase U-core stator motors with notched structures in stator segment, International Journal of Applied Electromagnetics and Mechanics, ISSN 1383-5416, vol. 52, no. 1-2, pp. 835-842, Dec. 2016, 10.3233/JAE-162042 (*Harbin Inst. of Technol., China; Changan Univ, Xi'an, Shaanxi, China; *Hanyang Univ, Ansan, Korea) (ISI 0.804/17, WOS:000391965800101, iospress) [A5'10].

89.           D. Ganeshaperumal, N. Muthukumar, K. Ramkumar, Seshadhri Srinivasan, B. Subathra, Optimal fractional controller design methodology for electric drive train, International Journal of Electric and Hybrid Vehicles, ISSN 1751-4088, vol. 8, no. 4, pp. 335-350, Dec. 2016, 10.1504/IJEHV.2016.10001654 (Kalasalingam Univ, Srivilliputhur, India; SASTRA Univ, Thanjavur, India) (ISI-ESCI, WOS:000389931000004, inderscience) [A1'12].

90.           Y. Shi, R.D. Lorenz, M.A. Valenzuela, New developments in loss minimizing control for drives without compromising torque dynamics, IEEE Transactions on Industry Applications, ISSN 0093-9994, vol. 52, no. 6, pp. 5327-5335, Nov.-Dec. 2016, 10.1109/TIA.2016.2597233 (*Univ of Wisconsin-Madison, Madison, WI, US; Univ of Concepcion, Concepcion, Chile) (ISI 2.743/17, WOS:000393098400088, IEEE) [A1'06], [A1'09]

91.           I. Janghorban Esfahani, P. Ifaei, J. Rshidi, C.K. Yoo, Control performance evaluation of reverse osmosis desalination system based on model predictive control and PID controllers, Desalination and Water Treatment, ISSN 1944-3994, vol. 57, no. 55, pp. 26692-26699, Nov. 2016, 10.1080/19443994.2016.1191776 (*Kyung Hee Univ, Gyeonggi-Do, Korea) (ISI 1.383/17, WOS:000386703400032, tandfonline) [A4'12]

92.           Y. Mao, J. Yang, D. Yin, Y. Chen, Sensorless IPMSM control based on an extended nonlinear observer with rotational inertia adjustment and equivalent flux error compensation, Journal of Power Electronics, ISSN 1598-2092, vol. 16, no. 6, pp. 2150-2161, Nov. 2016. 10.6113/JPE.2016.16.6.2150 (*Zhejiang Univ, Hangzhou, China; *Nanjing Univ of Science and Technology, Nanjing, China) (ISI 1.023/17, WOS:000388065100016, jpe.or.kr) [A2'08]

93.           S.K. Kim, J.S. Lee, K.B. Lee, Offset-free robust adaptive back-stepping speed control for uncertain permanent magnet synchronous motor, IEEE Transactions on Power Electronics, ISSN 0885-8993, vol. 31, no. 10, pp. 7065-7076, Oct. 2016, 10.1109/TPEL.2015.2508041 (LG Electronics, Seoul, Korea; Korea Railroad Research Institute, Uiwang, Seoul, Korea; Ajou Univ, Suwon, Korea) (ISI 6.812/17, WOS:000379955000028, IEEE) [A1'08]

94.           A. Shafiei, B.M. Dehkordi, S. Farhangi, A. Kiyoumarsi, Overall power control strategy for small-scale WECS incorporating flux weakening operation, IET Renewable Power Generation, ISSN 1752-1416, eISSN 1752-1424, vol. 10, no. 9, pp. 1264-1277, Oct. 2016. 10.1049/iet-rpg.2015.0409 (Univ of Isfahan, Iran; *Univ of Tehran, Iran) (ISI 3.488/17, WOS:000394517500003, IEEE) [A1'08]

95.         G.M. Valenzuela, M.A. Valenzuela, Payload estimation in AC electric mining shovels using drive signals, IEEE Transactions on Industry Applications, ISSN 0093-9994, vol. 52, no. 5, pp. 4470-4479, Sep.-Oct. 2016, 10.1109/TIA.2016.2574775 (Univ of Concepcion, Concepcion, Chile) (ISI 2.743/17, WOS:000384659900086, IEEE) [A1'04]

96.         F.J. Kalluf, A.S. Isfanuti, L.N. Tutelea, A. Moldovan-Popa, I. Boldea, 1-kW 2000-4500 r/min ferrite PMSM drive: Comprehensive characterization and two sensorless control options, IEEE Transactions on Industry Applications, ISSN 0093-9994, vol. 52, no. 5, pp. 3980-3989, Sep. 2016, 10.1109/TIA.2016.2574776 (Embraco, Joinville, Brasil; Univ Politehnica of Timisoara, Romania) (ISI 2.743/17, IEEE) [A2'08]_

97.         R.O. Grigoriu, A. Voda, N. Arghira, V. Calofir, S.S. Iliescu, Control of greenhouse with parabolic trough collectors, U.P.B. Scientific Bulletin, Series C, Electrical Engineering and Computer Science, ISSN 2286-3540, vol. 78, no. 3, pp. 75-84, Sep. 2016, (Univ Politehnica of Bucharest, Romania; Univ Joseph Fourier Grenoble 1, France) (ISI-ESCI, WOS:000393326700007, Scopus, scientificbulletin.upb.ro) [A4'12], [A3'13], [A2'14]

98.           S.A. Davari, Predictive direct angle control of induction motor, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 63, no. 8, pp. 5276-5284, Aug. 2016, 10.1109/TIE.2016.2551198 (Shahid Rajaee Teacher Training Univ, Tehran, Iran) (ISI 7.05/17, WOS:000384641300061, IEEE) [A1'06]

99.           S.A.C Giraldo, R.C.C. Flesch, J.E. Normey-Rico, Multivariable greenhouse control using the filtered Smith predictor, Journal of Control, Automation and Electrical Systems, Springer, ISSN 2195-3880, vol. 27, no. 4, pp. 349-358 , Aug. 2016, 10.1007/s40313-016-0250-6 (Federal Univ of Santa Catarina (UFSC), Florianopolis, Brazil) (ISI-ESCI, WOS:000379325600001, SpringerLink) [A4'12]

100.       C. Liu, G. Liu, Autobalancing control for MSCMG based on sliding-mode observer and adaptive compensation, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 63, no. 7, pp. 4346-4356, Jul. 2016, 10.1109/TIE.2016.2551681 (*Beihang Univ, Beijing, China) (ISI 7.05/17, WOS:000378538200034, IEEE) [A1'06]

101.     T. Nag, S.B. Santra, A. Chatterjee, D. Chatterjee, A.K. Ganguli, Fuzzy logic-based loss minimisation scheme for brushless DC motor drive system, IET Power Electronics, ISSN 1755-4535, vol. 9, no. 8, pp. 1581-1589, Jul. 2016, 10.1049/iet-pel.2015.0714 (Netaji Subhash Engineering College, Kolkata, India; KIIT Univ, Bhubaneswar, Odisha, India; Jadavpur Univ, Kolkata, India) (ISI 2.267/17, WOS:000379619900003, IEEE) [A1'12]

102.     S. Kim, J.-K. Seok, An enhanced finite-settling-step direct torque and flux control (FSS-DTFC) for IPMSM drives, Journal of Power Electronics, ISSN 1598-2092, vol. 16, no. 4, pp. 1367-1374, Jul. 2016. 10.6113/JPE.2016.16.4.1367 (Yeungnam Univ, Gyeongsan, Korea) (ISI 1.023/17, WOS:000383356300013, Scopus) [A1'09]

103.     W.C.A. Pereira, C.M.R. Oliveira, M.P. Santana, T.E.P. Almeida, A.G. Castro, G.T. Paula, M.L. Aguiar, Improved sensorless vector control of induction motor using sliding mode observer, IEEE Latin America Transactions, ISSN 1548-0992, vol. 14 , no. 7, pp. 3110-3116, Jul. 2016, 10.1109/TLA.2016.7587609 (*Univ of Sao Paulo, Brazil) (ISI 0.502/17, WOS:000386259900011, IEEE) [A1'06]

104.     J. Lara, J. Xu, A. Chandra, A novel algorithm based on polynomial approximations for an efficient error compensation of magnetic analog encoders in PMSMs for EVs, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 63, no. 6, pp. 3377-3388, Jun. 2016, 10.1109/TIE.2016.2518123 (Ecole de Technologie Superieure, Montreal, Canada) (ISI 7.05/17, WOS:000376120000006, IEEE) [A2'10]

105.     M. Siami, A. Abbaszadeh, D.A. Khaburi, J. Rodriguez, Robustness improvement of predictive current control using prediction error correction for permanent-magnet synchronous machines, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 63, no 6, pp. 3458-3466, Jun. 2016, 10.1109/TIE.2016.2521734 (Iran Univ of Science and Technology, Tehran, Iran; Universidad Andres Bello, Santiago, Chile) (ISI 7.05/17, WOS:000376120000013, IEEE) [A1'06]

106.     Z. Tang, X. Li, S. Dusmez, B. Akin, A new V/f-based sensorless MTPA control for IPMSM drives, IEEE Transactions on Power Electronics, ISSN 0885-8993, vol. 31, no. 6, pp. 4400-4415, Jun. 2016, 10.1109/TPEL.2015.2470177 (*Univ of Texas at Dallas, Richardson, TX, USA) (ISI 6.812/17, WOS:000368453300039, IEEE) [A2'08], [A2'10], [A2'12], [A3'12], [A1'13], [A4'13]

107.     J.S. Lee, R.D. Lorenz, Robustness analysis of deadbeat-direct torque and flux control for IPMSM drives, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 63, no. 5, pp. 2775-2784, May 2016, 10.1109/TIE.2016.2521353 (Kyungnam Univ, Changwon, Korea; *Univ of Wisconsin-Madison, USA) (ISI 7.05/17, WOS:000374164600012, IEEE) [A1'09]

108.     B. Du, S. Wu, S. Han, S. Cui, Application of linear active disturbance rejection controller for sensorless control of internal permanent-magnet synchronous motor, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 63, no. 5, pp. 3019-3027, May 2016, 10.1109/TIE.2016.2518123 (*Harbin Inst. of Technol., China) (ISI 7.05/17, WOS:000374164600035, IEEE) [A1'08]

109.     D. Potnuru, K.P.B. Chandra, I. Arasaratnam, D.W. Gu, K.A. Mary, S.B. Ch, Derivative-free square-root cubature Kalman filter for non-linear brushless DC motors, IET Electric Power Applications, ISSN 1751-8660, vol. 10, no. 5, pp. 419-429, May 2016, 10.1049/iet-epa.2015.0414 (GMR Institute of Technology, Rajam, Andhra Pradesh, India; *Univ of Exeter, UK; Apple Inc., Cupertino, CA, US; *Univ of Leicester, UK; Vignan Institute of Information Technology, Visakhapatnam, Andhra Pradesh, India; Jawaharlal Nehru Technological Univ, Kakinada, Andhra Pradesh, India) (ISI 2.211/17, WOS:000377431900014, IEEE) [A1'09], [A2'09], [A1'12]

110.     X. Zhou, B. Zhou, H. Guo, J. Wei, Research on sensorless and advanced angle control strategies for doubly salient electro-magnetic motor, IET Electric Power Applications, ISSN 1751-8660, vol. 10, no. 5, pp. 375-383, May 2016, 10.1049/iet-epa.2015.0369 (*Nanjing Univ of Aeronautics and Astronautics, China) (ISI 2.211/17, WOS:000377431900009, IEEE) [A1'12]

111.     X. Luo, Q. Tang, A. Shen, Q. Zhang, PMSM sensorless control by injecting HF pulsating carrier signal into estimated fixed-frequency rotating reference frame, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 63, no. 4, pp. 2294-2303, Apr. 2016, 10.1109/TIE.2015.2505679 (*Huazhong Univ of Science and Technology, Wuhan, China) (ISI 7.05/17, WOS:000372645900031, IEEE) [A1'06], [A1'09]

112.     Y. Yang, X. Hu, H. Pei, Z. Peng, Comparison of power-split and parallel hybrid powertrain architectures with a single electric machine: Dynamic programming approach, Applied Energy, Elsevier, ISSN 0306-2619, vol. 168, pp. 683-690, Apr. 2016, 10.1016/j.apenergy.2016.02.023 (Chongqing Univ, Chongqing, China) (ISI 7.9/17, WOS:000373863500058, ScDirect, Scopus) [A2'13]

113.     L. Rosca, M. Duguleana, An online observer for minimization of pulsating torque in SMPM motors, PLoS ONE, eISSN 1932-6203, vol. 11, no. 4, Apr. 2016, 10.1371/journal.pone.0153255 (Univ Lucian Blaga of Sibiu, Sibiu, Romania) (ISI 2.766/17, WOS:000374527000015, plos, PubMed) [A1'08]

114.     A.N. Smith, S.M. Gadoue, J.W. Finch, Improved rotor flux estimation at low speeds for torque MRAS-based sensorless induction motor drives, IEEE Transactions on Energy Conversion, ISSN 0885-8969, vol. 31, no. 1, pp. 270-282, Mar. 2016, 10.1109/TEC.2015.2480961 (*Newcastle Univ, UK; Alexandria Univ, Egypt) (ISI 3.767/17, WOS:000372024100026, IEEE) [A1'06]

115.     A. Almarhoon, Y. Ren, Z.Q. Zhu, Influence of back-EMF and current harmonics on sensorless control performance of single and dual three-phase permanent magnet synchronous machines, COMPEL - The Int. Journal for Computation and Mathematics in Electrical and Electronic Eng., ISSN 0332-1649, vol. 35, no. 2, pp. 744-763, Mar. 2016, 10.1108/COMPEL-12-2015-0441 (*Univ of Sheffield, UK) (ISI 0.534/17, WOS:000374137500025, Emerald) [A1'08]

116.     G. Zhang, G. Wang, D. Xu, R. Ni, C. Jia, Multiple-AVF cross-feedback-network-based position error harmonic fluctuation elimination for sensorless IPMSM drives, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 63, no. 2, pp. 821-831, Feb. 2016, 10.1109/TIE.2015.2492939 (*Harbin Inst. of Technol., China) (ISI 7.05/17, WOS:000369990300014, IEEE) [A1'09]

117.     G. Xie, K. Lu, S. Dwivedi, R. Riber, F. Blaabjerg, Minimum-voltage vector injection method for sensorless control of PMSM for low-speed operations, IEEE Transactions on Power Electronics, ISSN 0885-8993, vol. 31, no. 2, pp. 1785-1794, Feb. 2016, 10.1109/TPEL.2015.2426200 (*Aalborg Univ, Denmark; Danfoss Power Electronics A/S, Denmark) (ISI 6.812/17, WOS:000362364000071, IEEE) [A2'08]

118.     S.-K. Kim, K.-G. Lee, K.-B. Lee, Singularity-free adaptive speed tracking control for uncertain permanent magnet synchronous motor, IEEE Transactions on Power Electronics, ISSN 0885-8993, vol. 31, no. 2, pp. 1692-1701, Feb. 2016, 10.1109/TPEL.2015.2422790 (Ajou Univ, Suwon, Korea) (ISI 6.812/17, WOS:000362364000064, IEEE) [A1'08]

119.     Y. Cho, Improved sensorless control of interior permanent magnet sensorless motors using an active damping control strategy, Energies, ISSN 1996-1073, vol. 9, no. 3, pp. 1-15, Feb. 2016, 10.3390/en9030135 (Konkuk Univ, Seoul, Korea) (ISI 2.676/17, WOS:000373625500011, mdpi) [A1'09]

120.     J. Zhao, M. Lin, D. Xu, Minimum-copper-loss control of hybrid excited axial field flux-switching machine, IET Electric Power Applications, ISSN 1751-8660, vol. 10, no. 2, pp. 82-90, Feb. 2016, 10.1049/iet-epa.2015.0091 (*Southeast Univ, Nanjing, China) (ISI 2.211/17, WOS:000371810800002, IEEE) [A1'11]

121.     M.E. Asker, A.B. Ozer, H. Kurum, Reduction of EMI with chaotic space vector modulation in direct torque control, Elektronika ir Elektrotechnika, ISSN 1392-1215, vol. 22, no. 1, pp. 8-13, Feb. 2016, 10.5755/j01.eee.22.1.14097 (Dicle Univ, Diyarbakir, Turkey; Firat Univ, Elazig, Turkey) (ISI 1.088/17, WOS:000371081800002, Scopus) [A1'08]

122.     S. Ma, P. Wu, J. Ji, X. Li, Sensorless control of salient PMSM with adaptive integrator and resistance online identification using strong tracking filter, International Journal of Electronics, Taylor & Francis, ISSN 0020-7217, vol. 103, no. 2, pp. 217-231, Feb. 2016, 10.1080/00207217.2015.1036317 (*Tsinghua Univ, Beijing, China) (ISI 0.939/17, WOS:000364335900003, tandfonline) [A2'08], [A4'08], [A2'09]

123.     B. Chappuis, S. Gavin, L. Rigazzi, M. Carpita, Speed control of a multiphase active way linear motor based on back emf estimation, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 62, no. 12, pp. 7299-7308, Dec. 2015, 10.1109/TIE.2015.2463762 (Univ of Applied Sciences Western Switzerland, Yverdon-les-Bains, Switzerland) (ISI 7.05/17, WOS:000365019500001, IEEE) [A1'12]

124.     J. Rivera, J.J. Raygoza, S.O. Cisneros, A. Figueroa, O. Begovich, FPGA-based startup for AC electric drives: Application to a greenhouse ventilation system, Computers in Industry, Elsevier, ISSN 0166-3615, vol. 74, pp. 173-185, Dec. 2015. 10.1016/j.compind.2015.06.011 (National Polytechnic Institute (IPN), Guadalajara, Zapopan, Mexico; Univ of Guadalajara, Guadalajara, Mexico) (ISI 2.85/17, WOS:000364893000014, ScDirect) [A1'13]

125.     M. Kim, S. Heo, J. Oh, J.-H. Suk, Y.S. Yang, K.-T. Park, J. Kim, Sensorless sine-wave controller IC for PM brushless motor employing automatic lead-angle compensation, ETRI (Electronics Telecommunications Research Inst) Journal, ISSN 1225-6463, vol. 37, no. 6, pp. 1165-1175, Dec. 2015, 10.4218/etrij.15.0115.0329 (ETRI, Daejeon, Korea) (ISI 0.739/17, WOS:000366151900012, etrij) [A1'13]

126.     Z. Qiu, J. Xiao, S. Wang, Active-disturbance rejection control based on a novel sliding mode observer for PMSM speed and rotor position, Journal of Vibroengineering, ISSN 1392-8716, vol. 17, no. 8, pp. 4603-4617, Dec. 2015. (Southwest Jiaotong Univ, China) (ISI-ESCI 0.398/17, WOS:000367463200045) [A1'06].

127.     M. Koteich, A. Maloum, G. Duc, G. Sandou, Discussion on "AC drive observability analysis", IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 62, no. 11, pp. 7224-7225, Nov. 2015, 10.1109/TIE.2015.2438777 (Renault S.A.S. Technocentre, Guyancourt, France; *Paris-Sud Univ, Gif-sur-Yvette, France) (ISI 7.05/17, WOS:000362760300055, IEEE) [A2'08]

128.     S.M. Tripathia, A.N. Tiwarib, D. Singha, Grid-integrated permanent magnet synchronous generator based wind energy conversion systems: A technology review, Renewable and Sustainable Energy Reviews, ISSN 1364-0321, vol. 51, pp. 1288-1305, Nov. 2015,10.1016/j.rser.2015.06.060 (Kamla Nehru Institute of Technology, Sultanpur, India; Madan Mohan Malaviya Univ of Technology, Gorakhpur, India) (ISI 9.184/17, WOS:000364725700028, ScDirect) [A1'07]

129.     J. Agrawal, S. Bodkhe, Steady-state analysis and comparison of control strategies for PMSM, Modelling and Simulation in Engineering, ISSN 1687-5591, 11p, Nov. 2015. 10.1155/2015/306787 (G.H. Raisoni College of Engineering, Maharashtra, India; Shri Ramdeobaba College of Engineering & Management, Maharashtra, India) (ISI-ESCI, WOS:000214762400006, Scopus, INSPEC, hindawi-pdf) [A9'10]

130.     X. Wang, T. Fu, X. Wang, Position sensorless control of BLDC motors based on global fast terminal sliding mode observer, Journal of Power Electronics, ISSN 1598-2092, vol. 15, no. 6, pp. 1559-1566, Oct. 2015. 10.6113/JPE.2015.15.6.1559 (*Tianjin Univ, China) (ISI 1.023/17, WOS:000365143000015, Scopus) [A1'06]

131.     A. Terki, A. Moussi, N. Terki, Design of ANFIS estimator of permanent magnet brushless dc motor position for PV pumping system, International Journal of Advanced Computer Science and Applications, ISSN 2158-107X, vol. 6, no. 10, pp. 136-142, Oct. 2015, (Biskra Univ, Biskra, Algeria) (ISI-ESCI, WOS:000369851700020) [A1'12]

132.     K. Urbanski, K. Zawirski, Improved method for position estimation using a two-dimensional scheduling array, Automatika, Publisher: KoREMA, Croatia, ISSN 0005-1144, vol. 56, no. 3, pp. 331-340, Sep. 2015, 10.7305/automatika.2015.12.732 (Poznan Univ of Technology, Poland) (ISI 0.217/17, WOS:000368529700009, Automatika) [A2'02]

133.     F.G. Capponi, G. Borocci, G. De Donato, F. Caricchi, Flux regulation strategies for hybrid excitation synchronous machines, IEEE Transactions on Industry Applications, ISSN 0093-9994, vol. 51, no. 5, pp. 3838-3847, Sep.-Oct. 2015, 10.1109/TIA.2015.2417120 (*Univ of Rome "La Sapienza", Rome, Italy) (ISI 2.743/17, WOS:000361682100029, IEEE) [A1'10]

134.     J.-K. Seok, S. Kim, Hexagon voltage manipulating control (HVMC) for AC motor drives operating at voltage limit, IEEE Transactions on Industry Applications, ISSN 0093-9994, vol. 51, no. 5, pp. 3829-3837, Sep.-Oct. 2015, 10.1109/TIA.2015.2416125 (Yeungnam Univ, Gyeongbuk, Korea) (ISI 2.743/17, WOS:000361682100029, IEEE) [A1'09]

135.     F.J.W. Barnard, W.T. Villet, M.J. Kamper, Hybrid active-flux and arbitrary injection position sensorless control of reluctance synchronous machines, IEEE Transactions on Industry Applications, ISSN 0093-9994, vol. 51, no. 5, pp. 3899-3906, Sep.-Oct. 2015, 10.1109/TIA.2015.2425802 (*Univ of Stellenbosch, South Africa) (ISI 2.743/17, WOS:000361682100036, IEEE) [A3'10]

136.     P. Mercorelli, A two-stage sliding-mode high-gain observer to reduce uncertainties and disturbances effects for sensorless control in automotive applications, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 62, no. 9, pp. 5929-5940 Sep. 2015, 10.1109/TIE.2015.2450725 (Leuphana Univ of Lueneburg, Lueneburg, Germany) (ISI 7.05/17, WOS:000359560800058, IEEE) [A1'12]

137.     S. Lu, X. Tang, B. Song, S. Zheng, F.X. Zhou, Identification and compensation of force ripple in PMSLM using a JITL technique, Asian Journal of Control, ISSN 1561-8625, vol. 17, no. 5, pp. 1559-1568, Sep. 2015, 10.1002/asjc.959 (Wuhan Univ of Science and Technology, China; *Huazhong Univ of Science and Technology, Wuhan, China) (ISI 1.528/17, WOS:000361186700007, onlinelibrary.wiley) [A1'02]

138.     K.-W. Lee, Compensation of periodic magnetic saturation effects for the high-speed sensorless control of PMSM driven by inverter output power control-based PFC strategy, Journal of Power Electronics, ISSN 1598-2092, vol. 15, no. 5, pp. 1264-1273, Sep. 2015, 10.6113/JPE.2015.15.5.1264 (Mokpo National Maritime Univ, Mokpo, Korea) (ISI 1.023/17, WOS:000363973500013, Scopus) [A1'09]

139.     I. Boulaabi, A. Sellami, F.B. Hmida, A robust sensor fault reconstruction based on a new sliding mode observer design method for uncertain delayed systems: A satellite system application, Control Engineering and Applied Informatics, ISSN 1454-8658, vol. 17, no. 3, pp. 88-97, Sep. 2015, (Tunis Univ, Tunis, Tunisia) (ISI 0.698/17, WOS:000362387900010, ceai) [CEAI'03]

140.     M.T. Lingamsetti, T.T. Sreenu, Control of brushless DC motor with direct torque and indirect flux using SVPWM technique, Indian Journal of Science and Technology, ISSN 0974-6846, vol. 8, no. 23, pp. 129-132, Sep. 2015, 10.17485/ijst/2015/v8i23/71211 (KL Univ, Vijayawada, Andhra Pradesh, India) (ISI ZR, indjst) [A1'08]_

141.     Y. Zhao, Z. Zhang, W. Qiao, L. Wu, An extended flux model-based rotor position estimator for sensorless control of salient-pole permanent-magnet synchronous machines, IEEE Transactions on Power Electronics, ISSN 0885-8993, vol. 30, no. 8, pp. 4412-4422, Aug. 2015, 10.1109/TPEL.2014.2358621 (*Virginia Commonwealth Univ, Richmond, VA, US; *Univ of Nebraska-Lincoln, NE, USA) (ISI 6.812/17, WOS:000353128500036, IEEE) [A2'08]

142.     Z. Zhang, Y. Zhao, W. Qiao, L. Qu, A Discrete-time direct torque control for direct-drive PMSG-based wind energy conversion systems, IEEE Transactions on Industry Applications, ISSN 0093-9994, vol. 51, no. 4, pp. 3504-3514, Jul. 2015, 10.1109/TIA.2015.2413760 (*Univ of Nebraska-Lincoln, NE, US; *Virginia Commonwealth Univ, Richmond, VA, USA) (ISI 2.743/17, WOS:000358255700083, IEEE) [A2'08], [A1'09], [A2'09]

143.     A. Darba, P. D'haese, F. De Belie, J.A. Melkebeek, Improving the dynamic stiffness in a self-sensing BLDC machine drive using estimated load torque feedforward, IEEE Transactions on Industry Applications, ISSN 0093-9994, vol. 51, no.4, pp. 3101-3114, Jul. 2015, 10.1109/TIA.2015.2399623 (*Ghent Univ, Belgium) (ISI 2.743/17, WOS:000358255700042, IEEE) [A1'12]

144.     G. Boukettaya, O. Naifar, Improving grid connected hybrid generation system supervision with sensorless control, Journal of Renewable and Sustainable Energy, American Institute of Physics Inc., ISSN 1941-7012, vol. 7, no. 4, 18p, Jul. 2015, 10.1063/1.492679 (Univ of Sfax, Tunisia) (ISI 1.337/17, WOS:000360655500034, scitation.aip, Scopus) [A1'14]

145.     Z. Cerovsky, M. Lev, Permanent magnet synchronous machine parameters identification for load characteristics calculation, Automatika, Publisher: KoREMA, Croatia, ISSN 0005-1144, vol. 56, no. 2, pp. 217-225, Jun. 2015, 10.7305/automatika.2015.07.813 (Czech Technical Univ in Prague, Czech Rep.) (ISI 0.217/17, WOS:000365072100010, Automatika) [A1'09]

146.     C. Cui, G. Liu, K. Wang, X. Song, Sensorless drive for high-speed brushless DC motor based on the virtual neutral voltage, IEEE Transactions on Power Electronics, ISSN 0885-8993, vol. 30, no. 6, pp. 3275-3285, Jun. 2015, 10.1109/TPEL.2014.2337292 (*Beihang Univ, Beijing, China) (ISI 6.812/17, WOS:000348205700035, IEEE) [A1'12]

147.     Y. Sangsefidi, S. Ziaeinejad, A. Mehrizi-Sani, Estimation of stator resistance in direct torque control synchronous motor drives, IEEE Transactions on Energy Conversion, ISSN 0885-8969, vol. 30, no. 2, pp. 626-634 , Jun. 2015, 10.1109/TEC.2014.2364191 (*Washington State Univ, Pullman, WA, US; Iran Univ of Science and Technology, Tehran, Iran) (ISI 3.767/17, WOS:000354864300023, IEEE) [A1'08]

148.     Y. Errami, M. Ouassaid, M. Maaroufi, A performance comparison of a nonlinear and a linear control for grid connected PMSG wind energy conversion system, International Journal of Electrical Power & Energy Systems, Elsevier, ISSN 0142-0615, vol. 68, pp. 180-194, Jun. 2015, 10.1016/j.ijepes.2014.12.027 (Chouaib Doukkali Univ, Eljadida, Morocco; Cadi Ayyad Univ, Safi, Morocco; Univ Mohammed V. Agdal, Rabat, Morocco) (ISI 3.61/17, WOS:000349725600019, ScDirect) [A1'07]

149.     G. Pellegrino, B. Boazzo, T.M. Jahns, Magnetic model self-identification for PM synchronous machine drives, IEEE Transactions on Industry Applications, ISSN 0093-9994, vol. 51, no. 3, pp. 2246-2254, May-Jun. 2015, 10.1109/TIA.2014.2365627 (Politecnico di Torino, Italy, *Univ of Wisconsin-Madison, USA) (ISI 2.743/17, WOS:000354944600034, IEEE) [A1'09]

150.     Y. Zhao, W. Qiao, L. Wu, Dead-time effect analysis and compensation for a sliding-mode position observer-based sensorless IPMSM control system, IEEE Transactions on Industry Applications, ISSN 0093-9994, vol. 51, no. 3, pp. 2528-2535, May 2015, 10.1109/TIA.2014.2372094 (*Virginia Commonwealth Univ, Richmond, VA, US; *Univ of Nebraska-Lincoln, NE, USA) (ISI 2.743/17, WOS:000354944600063, IEEE) [A2'08]

151.     S.-K. Kim, H. Song, J.-H. Lee, Adaptive disturbance observer-based parameter-independent speed control of an uncertain permanent magnet synchronous machine for wind power generation applications, Energies, ISSN 1996-1073, vol. 8, no. 5, pp. 4496-4512, May 2015, 10.3390/en8054496 (Ajou Univ, Suwon, Korea; Seoul National Univ of Technology, Seoul, Korea; Kunsan Nat'l Univ, Korea) (ISI 2.676/17, WOS:000356879600060, mdpi) [A1'08]

152.     Y. Wan, J. Zhao, G.M. Dimirovski, Nonlinear adaptive control for multimachine power systems with boilerturbinegenerator unit, International Transactions on Electrical Energy Systems, ISSN 2050-7038, vol. 25, no. 5, pp. 859-875, May 2015, 10.1002/etep.1879 (*Northeastern Univ, Shenyang, China; *Univ of Aeronautics and Astronautics, Nanjing, China; Dogus Univ, Kadikoy, Istanbul, Turkey; SS Cyril & Methodius Univ, Skopje, Macedonia) (ISI 1.619/17, WOS:000354642100008, wiley) [A10'10]

153.     D. Stojic, M. Milinkovic, S. Veinovic, I. Klasnic, Improved stator flux estimator for speed sensorless induction motor drives, IEEE Transactions on Power Electronics, ISSN 0885-8993, vol. 30, no. 4, pp. 2363-2371, Apr. 2015, 10.1109/TPEL.2014.2328617 (*Univ of Belgrade, Serbia) (ISI 6.812/17, WOS:000344993500053, IEEE) [A1'06]

154.     A. Sivaprakasam, T. Manigandan, An alternative scheme to reduce torque ripple and mechanical vibration in direct torque controlled permanent magnet synchronous motor, Journal of Vibration and Control (JVC), ISSN 1077-5463, vol. 21, no. 5, pp. 855-871, Apr. 2015, 10.1177/1077546313492182 (Kongu Eng. College, Erode, India; PA College of Eng. and Tech. Pollachi, India) (ISI 2.197/17, WOS:000350494700003, jvc, Scopus) [A1'08]

155.     G.F.H. Beng, X. Zhang, D.M. Vilathgamuwa, Sensor fault-resilient control of interior permanent-magnet synchronous motor drives, IEEE/ASME Transactions on Mechatronics, ISSN 1083-4435, vol. 40, no. 2, pp. 855-864, Apr. 2015, 10.1109/TMECH.2014.2311126 (*Nanyang Technological Univ, Singapore; *Queensland Univ of Technology, Brisbane, Australia) (ISI 3.936/17, WOS:000352365800035, IEEE) [A2'08], [A1'09]

156.     J. Li, R. Li, Research on nonlinear robust control based on the power consumption efficiency model of asynchronous motor, Applied Mathematics & Information Sciences, ISSN 2325-0399, vol. 9, no. 2, pp. 681-689, Apr. 2015, 10.12785/amis/090216 (Univ of Science and Technology Beijing, China) (ISI 1.232/.13, naturalspub) [A1'13]__

157.     J. Gong, L. Xiong, F. Liu, X.A. Zha, A regenerative cascaded multilevel converter adopting active front ends only in part of cells, IEEE Transactions on Industry Applications, ISSN 0093-9994, vol. 51, no. 2, pp. 1754-1762, Mar.-Apr. 2015, 10.1109/TIA.2014.2360014 (*Wuhan Univ, Wuhan, China; Hubei Univ of Technology, Wuhan, China) (ISI 2.743/17, WOS:000351760400068, IEEE) [A1'13]

158.     A. Calle-Prado, S. Alepuz, J. Bordonau, J. Nicolas-Apruzzese, P. Cortes, J. Rodriguez, Model predictive current control of grid-connected neutral-point-clamped converters to meet low-voltage ride-through requirements, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 62, no. 3, pp. 1503-1514, Mar. 2015, 10.1109/TIE.2014.2364459 (Technical Univ of Catalonia, Barcelona, Spain) (ISI 7.05/17, WOS:000349676900018, IEEE) [A1'07]

159.     L. Pugi, E. Galardi, C. Carcasci, A. Rindi, N. Lucchesi, Preliminary design and validation of a real time model for hardware in the loop testing of bypass valve actuation system, Energy Conversion and Management, Elsevier, ISSN 0196-8904, vol. 92, pp. 366-384, Mar. 2015, 10.1016/j.enconman.2014.12.061 (*Univ of Florence, Italy) (ISI 6.377/17, WOS:000349724800035, ScDirect) [A3'11]

160.     M.S. Mahmoud, M. Sabih, M. Elshafei, Using OPC technology to support the study of advanced process control, ISA Transactions, ISSN 0019-0578, vol. 55, pp. 155-167, Mar. 2015, 10.1016/j.isatra.2014.07.013 (King Fahd Univ of Petroleum and Minerals, Dhahran, Saudi Arabia) (ISI 3.370/17, WOS:000352678200015, ScDirect) [A2'11]

161.     E. Mese, Y. Yasa, H. Akca, M.G. Aydeniz, M. Garip, Investigating operating modes and converter options of dual winding permanent magnet synchronous machines for hybrid electric vehicles, IEEE Transactions on Energy Conversion, ISSN 0885-8969, vol. 30, no. 1, pp. 285-295, Mar. 2015, 10.1109/TEC.2014.2360714 (Yildiz Technical Univ, Istanbul, Turkey) (ISI 3.767/17, WOS:000352056300030, IEEE) [A7'08], [A1'11]

162.     Y. Xu, J. Jiang, An improved flux estimator for gap flux orientation control of DC-excited synchronous machines, Journal of Power Electronics, ISSN 1598-2092, vol. 15, no.2, pp. 419-430, Mar. 2015, 10.6113/JPE.2015.15.2.419 (*Shanghai Jiao Tong Univ, Shanghai, China) (ISI 1.023/17, WOS:000351249800013, Scopus) [A1'05], [A2'08], [A1'11]

163.     M. Bourogaoui, H. Ben Attia Sethom, I. Slama-Belkhodja, H. Sammoud, An improved sensorless IPMSM control at low speeds and standstill for washing machine drives using dsPIC technology, Control Engineering and Applied Informatics, ISSN 1454-8658, vol. 17, no. 1, pp. 22-30, Mar. 2015, (Univ de Carthage, Tunis, Tunisia; Univ de Tunis El Manar, Tunis, Tunisia; APPCON Technologies SUARL, Ariana, Tunisia) (ISI 0.698/17, WOS:000352182800003, ceai) [CEAI'03]

164.     A.V. Sayee Krishna, S. Kumar, J. Henry, A high performance direct torque control of PMBLDC motor using AI, Journal of Electrical Systems (JES), ISSN 1112-5209, vol. 11, no. 1, pp. 27-35, Mar. 2015. (Tamilnadu Transmission Corporation, Chennai, India) (ISI-ESCI, WOS:000359193700003, jes) [A1'09] pdf

165.     Y. Zhou, S. Long, Sensorless direct torque control for electrically excited synchronous motor based on injecting high-frequency ripple current into rotor winding, IEEE Transactions on Energy Conversion, ISSN 0885-8969, vol. 30, no. 1, pp. 246-253, Feb. 2015, 10.1109/TEC.2014.2360991 (Fuzhou Univ, Fuzhou, China) (ISI 3.767/17, WOS:000352056300026, IEEE) [A1'08]

166.     Rui Li, Chao-nan Tong, Xu Yang, Active speed compensation method of direct torque control system and stability analysis, Advances in Mechanical Engineering, ISSN 1687-8140, vol. 7, no. 2, pp. 1-11, Feb. 2015, (Univ of Science and Technology Beijing, China; *Shanghai Jiao Tong Univ, Shanghai, China) (ISI 0.848/17, WOS:000354083600085, sagepub) [A2'10]

167.     Y. Chen, T.H. Liu, C.F. Hsiao, C.K. Lin, Implementation of adaptive inverse controller for an interior permanent magnet synchronous motor adjustable speed drive system based on predictive current control, IET Electric Power Applications, ISSN 1751-8660, vol. 9, no. 1, pp. 60-70, Jan. 2015, 10.1049/iet-epa.2014.0035 (National Taiwan Univ of Science and Technology, Taipei, Taiwan; National Taiwan Ocean Univ, Keelung, Taiwan) (ISI 2.211/17, WOS:000347377600007, IEEE) [A1'09]

168.     E.K. Beser, S. Camur, B. Arifoglu, E. Beser, Comparison of two rotor configurations by changing the amount of magnet and reluctance components, Journal of Electrical Engineering & Technology, ISSN 1975-0102, vol. 10, no. 1, pp. 155-164, Jan. 2015, 10.5370/JEET.2015.10.1.155 (Kocaeli Univ, Turkey) (ISI 0.597/17, WOS:000348008800018, jeet.or.kr) [A2'06]

169.     F. Wang, Z. Zhang, S. Davari, R. Fotouhi, D. Arab Khaburi, J. Rodriguez, R. Kennel, An encoderless predictive torque control for an induction machine with a revised prediction model and EFOSMO, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 61, no. 12, pp. 6635-6644, Dec. 2014, 10.1109/TIE.2014.2317140 (*Technical Univ of Munich, Germany; Shahid Rajaee Teacher Training Univ, Tehran, Iran; Iran Univ of Science and Technology, Tehran, Iran; Univ Federico Santa Maria, Valparaiso, Chile) (ISI 7.05/17, WOS:000342282900016, IEEE) [A1'06]

170.     J.A. Martinez-Velasco, S. Alepuz, F. Gonzalez-Molinac, J. Martin-Arnedod, Dynamic average modeling of a bidirectional solid state transformer for feasibility studies and real-time implementation, Electric Power Systems Research, ISSN 0378-7796, Elsevier, vol. 117, pp. 143-153, Dec. 2014, 10.1016/j.epsr.2014.08.005 (*Universitat Politecnica de Catalunya, Barcelona, Spain; Technical Univ of Catalonia, Mataro, Spain; Rovira & Virgili Univ, Tarragona, Spain) (ISI 2.856/17, WOS:000343691200016, ScDirect) [A1'07]

171.     M. Bounadja, A.W. Belarbi, B. Belmadani, Vector control of double excited synchronous machine as integrated starter-alternator, Automatika, Publisher: KoREMA, Croatia, ISSN 0005-1144, vol. 55, no. 4, pp. 455-462, Dec. 2014, 10.7305/automatika.2014.12.542 (Hassiba Benbouali Univ, Chlef, Algeria; Mohamed Boudiaf Univ of Science and Technology, Oran, Algeria) (ISI 0.217/17, WOS:000347365700009, Automatika) [A4'06], [A7'08], [A1'11]

172.     B. Cheng, Z. Wei, RESTful M2M gateway for remote wireless monitoring for district central heating networks, Sensors, ISSN 1424-8220, vol. 14, no. 12, pp. 22447-22470, Nov. 2014. 10.3390/s141222447 (Beijing Univ of Posts & Telecommunications, Beijing, China) (ISI 2.475/17, WOS:000346794300016, mpdi) [A4'09]

173.     I. Boldea, L.N. Tutelea, L. Parsa, D. Dorrell, Automotive electric propulsion systems with reduced or no permanent magnets: An overview, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 61, no. 10, pp. 5696-5711, Oct. 2014. 10.1109/TIE.2014.2301754 (Politehnica Univ of Timisoara, Romania; Rensselaer Polytechnic Institute, Troy, NY, USA; *Univ of Technology, Sydney, Australia; *National Cheng Kung Univ, Tainan, Taiwan) (ISI 7.05/17, IEEE) [A1'11], [A3'09]_

174.     F. Wang, Z. Zhang, A. Davari, J. Rodriguez, R. Kennel, An experimental assessment of finite-state predictive torque control for electrical drives by considering different online-optimization methods, Control Engineering Practice, ISSN 0967-0661, Elsevier, vol. 31, pp. 1-8, Oct. 2014, 10.1016/j.conengprac.2014.06.004 (*Technical Univ of Munich, Germany; Shahid Rajaee Teacher Training Univ, Tehran, Iran; Univ Federico Santa Maria, Valparaiso, Chile) (ISI 2.616/17, WOS:000342273000001, ScDirect) [A1'06]

175.     F. Giulii Capponi, G. De Donato, G. Borocci, F. Caricchi, Axial-flux hybrid-excitation synchronous machine: Analysis, design, and experimental evaluation, IEEE Transactions on Industry Applications, ISSN 0093-9994, vol. 50, no. 5, pp. 3173-3184, Sep.-Oct. 2014, 10.1109/TIA.2014.2303253 (*Univ of Rome "La Sapienza", Rome, Italy) (ISI 2.743/17, WOS:000312901703118, IEEE) [A1'10]

176.     S. Kim, J. Seok, Finite-settling-steps direct torque and flux control for torque-controlled interior pm motors at voltage limits, IEEE Transactions on Industry Applications, ISSN 0093-9994, vol. 50, no. 5, pp. 3374-3381, Sep.-Oct. 2014, 10.1109/TIA.2014.2303424 (Yeungnam Univ, Gyeongsan, Korea) (ISI 2.743/17, WOS:000346225600048, IEEE) [A1'09]

177.     Кочетков, Сергей Александрович; Уткин, Виктор Анатольевич, DC motor control on the base of vortex algorithm (in Russian), Проблемы управления/Control Sciences, ISSN 1819-3161, no. 5, pp. 20-27, Oct. 2014, (Институт проблем управления им. В.А. Трапезникова РАН) (ISI, RSCI:22320957, elibrary.ru) [A1'06].

178.     G. Wang, T. Li, G. Zhang, X. Gui, D. Xu, Position estimation error reduction using recursive-least-square adaptive filter for model-based sensorless interior permanent-magnet synchronous motor drives, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 61, no. 9, pp. 5115-5125, Sep. 2014, 10.1109/TIE.2013.2264791 (*Harbin Inst. of Technol., China) (ISI 7.05/17, WOS:000333467900068, IEEE) [A1'09]

179.     M. Masmoudi, B. El Badsi, A. Masmoudi, DTC of B4-inverter fed BLDC motor drives with reduced torque ripple during sector-to-sector commutations, IEEE Transactions on Power Electronics, ISSN 0885-8993, vol. 29. no. 9, pp. 4855-4865, Sep. 2014, 10.1109/TPEL.2013.2284111 (Sfax Higher Inst. of Technology, Tunisia; Univ of Sfax, Tunisia) (ISI 6.812/17, WOS:000335959900041, IEEE) [A1'12]

180.     H.W. Sim, J.S. Lee, K.B. Lee, A simple strategy for sensorless speed control for an IPMSM during startup and over wide speed range, Journal of Electrical Engineering & Technology, ISSN 1975-0102, vol. 9, no. 4, pp. 1582-1591, Sep. 2014. 10.5370/JEET.2014.9.5.1582 (Ajou Univ, Suwon, Korea) (ISI 0.597/17, WOS:000341171800017, jeet-pdf) [A1'08]

181.     A. Sivaprakasam, T. Manigandan, A novel method to minimize torque ripple, mechanical vibration, and noise in a direct torque controlled permanent magnet synchronous motor drive, International Journal of Acoustics and Vibrations, ISSN 1027-5851, vol. 19, no. 3, pp. 179-189, Sep. 2014. (Kongu Engineering College, Perundurai, Erode, Tamil Nadu, India; P.A. College of Engineering and Technology, Pollachi, Tamil Nadu, India) (ISI 0.375/17, WOS:000341898500005, Scopus) [A1'08]

182.     F.J. Jimenez, F.R. Lara, M.D. Redel, API for communication between Labview and Arduino UNO, IEEE Latin America Transactions, ISSN 1548-0992, vol. 12 , no. 6, pp. 971-976, Sep. 2014, 10.1109/TLA.2014.6893988 (Univ de Cordoba, Spain) (ISI 0.502/17, WOS:000342055200003, IEEE) [A2'11]

183.     S. Derammelaere, C. Debruyne, F. De Belie, K. Stockman, L. Vandevelde, Load angle estimation for two-phase hybrid stepping motors, IET Electric Power Applications, ISSN 1751-8660, vol. 8, no. 7, pp. 257-266, Aug. 2014, 10.1049/iet-epa.2013.0333 (*Univ of Ghent, Belgium) (ISI 2.211/17, WOS:000340266100002, IEEE) [A1'13]

184.     M. Fatu, F. Blaabjerg, I. Boldea, Grid to standalone transition motion-sensorless dual-inverter control of PMSG with asymmetrical grid voltage sags and harmonics filtering, IEEE Transactions on Power Electronics, ISSN 0885-8993, vol. 29, no. 7, pp. 3463-3472, Jul. 2014. 10.1109/TPEL.2013.2279883 (*Aalborg Univ, Denmark; Univ Politehnica of Timisoara, Romania) (ISI 6.812/17, IEEE) [A1'07]_

185.     W. Xu, R.D. Lorenz, Reduced parameter sensitivity stator flux linkage observer in deadbeat-direct torque and flux control for IPMSMs, IEEE Transactions on Industry Applications, ISSN 0093-9994, vol. 50. no. 4, pp. 2626-2636, Jul. 2014, 10.1109/TIA.2014.2298554 (*Univ of Wisconsin-Madison, USA) (ISI 2.743/17, WOS:000340464900036, IEEE) [A1'06], [A2'08], [A1'09]

186.     G.A.P. The, Alternatives to classical curricula: exploring engineer skills of teaching-assistance scholarship holders in not-structured lab lessons of optoelectronic instrumentation, Int. Journal of Electrical Engineering Education, ISSN 0020-7209, vol. 51, no. 3, pp. 174-189, Jul. 2014, 10.7227/IJEEE.51.3.1 (Federal Univ of Ceara, Fortaleza, Brazil) (ISI 0.593/17, WOS:000346146800001, ije) [A5'09]

187.     B. Bahrani, M. Vasiladiotis, A. Rufer, High-order vector control of grid-connected voltage-source converters with LCL-filters, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 61, no. 6, pp. 2767-2775, Jun. 2014, 10.1109/TIE.2013.2276442 (*Swiss Federal Inst. of Technology in Lausanne, Switzerland) (ISI 7.05/17, WOS:000329055300013, IEEE) [A1'11]

188.     G. Wang, H. Zhan, G. Zhang, X. Gui, D.G. Xu, Adaptive compensation method of position estimation harmonic error for EMF-based observer in sensorless IPMSM drives, IEEE Transactions on Power Electronics, ISSN 0885-8993, vol. 29, no. 6, pp. 3055-3064, Jun. 2014, 10.1109/TPEL.2013.2276613 (*Harbin Inst. of Technol., China) (ISI 6.812/17, WOS:0003315540000402, IEEE) [A1'09]

189.     Y. Park, S.-K. Sul, Sensorless control method for PMSM based on frequency-adaptive disturbance observer, IEEE Journal of Emerging and Selected Topics in Power Electronics, ISSN 2168-6777, vol. 2, no. 2, pp. 143-151, Jun. 2014, 10.1109/JESTPE.2013.2296596 (*Seoul National Univ, Korea) (ISI 5.177/17, WOS:000358606900003, IEEE) [A2'08]

190.     S. Bolognani, S. Calligaro, R. Petrella, Adaptive flux-weakening controller for interior permanent magnet synchronous motor drives, IEEE Journal of Emerging and Selected Topics in Power Electronics, ISSN 2168-6777, vol. 2, no. 2, pp. 236-248, Jun. 2014, 10.1109/JESTPE.2014.2299153 (*Univ of Padova, Italy; Univ of Udine, Italy) (ISI 5.177/17, WOS:000358606900012, IEEE) [A2'10]

191.     S. Bolognani, S. Calligaro, R. Petrella, Design issues and estimation errors analysis of back-EMF-based position and speed observer for SPM synchronous motors, IEEE Journal of Emerging and Selected Topics in Power Electronics, ISSN 2168-6777, vol. 2, no. 2, pp. 159-170, Jun. 2014, 10.1109/JESTPE.2013.2296974 (*Univ of Padova, Italy; Univ of Udine, Italy) (ISI 5.177/17, WOS:000358606900005, IEEE) [A4'08], [A1'09]

192.     J. Liu, Z. Zhu, Improved sensorless control of permanent-magnet synchronous machine based on third-harmonic Back EMF, IEEE Transactions on Industry Applications, ISSN 0093-9994, vol. 50, no. 3, pp. 1861-1870, May-Jun. 2014, 10.1109/TIA.2013.2284299 (*Univ of Sheffield, UK) (ISI 2.743/17, WOS:000338984300028, IEEE) [A1'08], [A1'12]

193.     Z. Zhang, S. Ma, J. Dai, Y. Yan, Investigation of hybrid excitation synchronous machines with axial auxiliary air-gaps and non-uniform air-gaps, IEEE Transactions on Industry Applications, ISSN 0093-9994, vol. 50, no. 3, pp. 1729-1737, May-Jun. 2014, 10.1109/TIA.2013.2282937 (*Nanjing Univ of Aeronautics and Astronautics, China) (ISI 2.743/17, WOS:000338984300014, IEEE) [A1'10]

194.     L. An, D. Franck, K. Hameyer, Sensorless field oriented control using back-EMF and flux observer for a surface mounted permanent magnet synchronous motor, Int. Journal of Applied Electromagnetics and Mechanics, (16th Int. Symp. on Applied Electromagnetics and Mechanics (ISEM 2013, Quebec, Canada, Aug. 2014), ISSN 1383-5416, vol. 45, no. 1-4, pp. 845-850, May 2014, 10.3233/JAE-141915, (*RWTH (Rhein Westfal TH) Aachen Univ, Germany) (ISI 0.804/17, WOS:000340429600111, iospress, pdf) [A1'09]

195.     S. Kahourzade, A. Mahmoudi, H.W. Ping, M.N. Uddin, A comprehensive review of axial-flux permanent-magnet machines, Canadian Journal of Electrical and Computer Engineering, ISSN 0840-8688, vol. 37, no. 1, pp. 19-33, May 2014, 10.1109/CJECE.2014.2309322 (Univ of Malaya, Kuala Lumpur, Malaysia; Lakehead Univ, Thunder Bay, Canada) (ISI 0.973/17, WOS:000339449300003, IEEE) [A2'08]

196.     T.D. Nguyen, G. Foo, K.-J. Tseng, D.M. Vilathgamuwa, Modeling and sensorless direct torque and flux control of a dual-airgap axial flux permanent-magnet machine with field-weakening operation, IEEE/ASME Transactions on Mechatronics, ISSN 1083-4435, 2014, vol. 19, no. 2, pp. 412- 422, Apr. 2014, 10.1109/TMECH.2013.2242481 (*Nanyang Technological Univ, Singapore) (ISI 3.936/17, WOS:000332010400002, IEEE) [A2'06], [A2'08], [A1'09]

197.     Z.Q. Zhu, Y. Ren, J. Liu, Improved torque regulator to reduce steady-state error of torque response for direct torque control of permanent magnet synchronous machine drives, IET Electric Power Applications, ISSN 1751-8660, vol. 8, no. 3, pp. 108-116, Mar. 2014, 10.1049/iet-epa.2013.0180 (*Univ of Sheffield, UK) (ISI 2.211/17, WOS:000332157800004, IEEE) [A1'09]

198.     B.S. Bhangu, K. Rajashekara, Electric starter generators: Their integration into gas turbine engines, IEEE Industry Applications Magazine, ISSN 1077-2618, vol. 20, no. 2, pp. 14-22, Mar. 2014, 10.1109/MIAS.2013.2288398 (Rolls-Royce, Singapore; *Univ of Texas, Dallas, USA) (ISI 0.864/17, WOS:000331787900004, IEEE) [A2'12]

199.     S. Alepuz, F. Gonzalez-Molina, J. Martin-Arnedo, J.A. Martinez-Velascod, Development and testing of a bidirectional distribution electronic power transformer model, Electric Power Systems Research, Elsevier, ISSN 0378-7796, vol. 107, pp. 230-239, Feb. 2014, 10.1016/j.epsr.2013.10.010 (Technical Univ of Catalonia, Barcelona, Spain; Rovira & Virgili Univ, Tarragona, Spain) (ISI 2.856/17, WOS:000329385000029, ScDirect) [A1'07]

200.     R. Aguilar-Lopez, M.I. Neria-Gonzalez, R. Martinez-Guerra, J.L. Mata-Machuca, Nonlinear estimation in a class of gene transcription process, Applied Mathematics and Computation, ISSN 0096-3003, vol. 226, no. 1, pp. 131-144, Jan. 2014, 10.1016/j.amc.2013.10.012 (National Polytechnic Inst., Mexico) (ISI 2.3/17, WOS:000331496200014, ScDirect) [A1'06]

201.     A. Aimad, K. Madjid, S. Mekhilef, Robust sensorless sliding mode flux observer for DTC-SVM-based drive with inverter nonlinearity compensation, Journal of Power Electronics, Korean Inst. Power Electronics, ISSN 1598-2092, vol. 14, no. 1, pp. 125-134, Jan. 2014, 10.6113/JPE.2014.14.1.125 (Univ of Boumerdes, Algeria; Univ of Malaya, Kuala Lumpur, Malaysia) (ISI 1.023/17, WOS:000329894100013, JPE) [A1'09]

202.     F. Gabriel, F. De Belie, X. Neyt, P. Lataire, High-frequency issues using rotating voltage injections intended for position self-sensing, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 60, no. 12, pp. 5447-5457, Dec. 2013, 10.1109/TIE.2012.2230604 (Royal Military Academy, Brussels, Belgium; *Ghent Univ, Belgium; *Vrije Univ of Brussel, Belgium) (ISI 7.05/17, WOS:000320946000008, IEEE) [A2'08]

203.     V.M. Panchade, R.H. Chile, B.M. Patre, A survey on sliding mode control strategies for induction motors, Annual Reviews in Control, ISSN 1367-5788, Elsevier, vol. 37, no. 2, pp. 289-307, Dec. 2013, 10.1109/TIE.2012.2230604 (G.H. Raisoni Inst. of Eng. and Tech., Pune, India; S.G.G.S. Inst. of Eng. and Tech., Nanded, India) (ISI 2.32/17, WOS:000327580000008, ScDirect) [A1'06]

204.     Y. Zhao, C. Wei, Z. Zhang, W. Qiao, A review on position/speed sensorless control for permanent-magnet synchronous machine-based wind energy conversion systems, IEEE Journal of Emerging and Selected Topics in Power Electronics, ISSN 2168-6777, vol. 1, no. 4, pp. 203-216, Dec. 2013, 10.1109/JESTPE.2013.2280572 (*Univ of Nebraska-Lincoln, USA) (ISI 5.177/17, WOS:000209454200002, IEEE) [A2'08]

205.     Sung-Joon Lee, Tae-Wan Kim, Won-Seok Kim, Marn-Go Kim, Young-Seok Jung, Performance improvement of sensorless control of IPMSM using active flux concept by improved current estimators (in Korean), Transactions of the Korean Institute of Power Electronics, ISSN 1229-2214, vol. 18, no. 6, pp. 587-592, Dec. 2013. 10.6113/TKPE.2013.18.6.587 (ISI, KJD:ART001826266, Google Scholar, koreascience) [A2'08], [A2'09] pdf

206.     D. Xiao, M.F. Rahman, Sensorless direct torque and flux controlled IPM synchronous machine fed by matrix converter over a wide speed range, IEEE Transactions on Industrial Informatics, ISSN 1551-3203, vol. 9, no. 4, pp. 1855-1867, Nov. 2013, 10.1109/TII.2012.2226895 (*Univ of New South Wales, Sydney, Australia) (ISI 5.43/17, WOS:000326113700007, IEEE) [A1'09]

207.     X. Qiu, WX. Huang, FF. Bu, Torque-angle-based direct torque control for interior permanent-magnet synchronous motor drivers in electric vehicles, Journal of Power Electronics, Korean Inst. Power Electronics, ISSN 1598-2092, vol. 13, no. 6, pp. 964-974, Nov. 2013, 10.6113/JPE.2013.13.6.964 (*Nanjing Univ of Aeronautics and Astronautics, China) (ISI 1.023/17, WOS:000327282800005, JPE) [A1'08], [A2'09]

208.     S. Arumugam, M. Thathan, Novel switching table for direct torque controlled permanent magnet synchronous motors to reduce torque ripple, Journal of Power Electronics, Korean Inst. Power Electronics, ISSN 1598-2092, vol. 13, no. 6, pp. 939-954, Nov. 2013, 10.6113/JPE.2013.13.6.939 (Kongu Engn. Coll. Erode, India; PA Coll. Engn. & Technol., Pollachi, India) (ISI 1.023/17, WOS:000327282800003, JPE) [A1'08]

209.     S.A. Davari, D.A. Khaburi, F. Wang, R. Kennel, Robust sensorless predictive control of induction motors with sliding mode voltage model observer, Turkish Journal of Electrical Engineering & Computer Sciences, ISSN 1300-0632, vol. 21, no. 6, pp. 1539-1552, Nov. 2013, 10.3906/elk-1110-3 (Iran Univ of Science and Technology, Tehran, Iran; *Technical Univ of Munich, Germany) (ISI 0.58/17, WOS:000325373300003, journals.tubitak-pdf) [A1'06]

210.     A. Consoli, G. Scelba, G. Scarcella, M. Cacciato, An effective energy-saving scalar control for industrial IPMSM drives, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 60, no. 9, pp. 3658-3669, Sep. 2013, 10.1109/TIE.2012.2207651 (Univ of Catania, Italy) (ISI 7.05/17, WOS:000318702200010, IEEE) [A2'10], [A4'10]

211.     K. Lu, X. Lei, F. Blaabjerg, Artificial inductance concept to compensate nonlinear inductance effects in the back emf-based sensorless control method for PMSM, IEEE Transactions on Energy Conversion, ISSN 0885-8969, vol. 28, no. 3, pp. 593-600, Sep. 2013, 10.1109/TEC.2013.2261995 (Shanghai Maritime Univ, China; *Aalborg Univ, Denmark) (ISI 3.767/17, WOS:000323567300013, IEEE) [A2'08]

212.     Q.-C. Zhong, AC Ward Leonard drive systems: Revisiting the four-quadrant operation of ac machines, European Journal of Control, Elsevier, ISSN 0947-3580, vol. 19, no. 5, pp. 426-435, Sep. 2013, 10.1016/j.ejcon.2013.05.013 (*Univ of Sheffield, UK) (ISI 2.026/17, WOS:000321803800012, ScDirect) [A2'10]

213.     R. Morales-Caporal, E. Bonilla-Huerta, M. Arjona, C. Hernandez, Sensorless predictive DTC of a surface-mounted permanent-magnet synchronous machine based on its magnetic anisotropy, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 60, no. 8, pp. 3016-3024, Aug. 2013, 10.1109/TIE.2012.2198039 (Technological Inst. of Apizaco, Mexico; Technological Inst. of La Laguna, Torreon, Mexico) (ISI 7.05/17, WOS:000317864400008, IEEE) [A2'08]

214.     C.S. Ting, Y.N. Chang, Observer-based backstepping control of linear stepping motor, Control Engineering Practice, Elsevier, ISSN 0967-0661, vol. 21, no. 7, pp. 930-939, Jul. 2013, 10.1016/j.conengprac.2013.02.018 (National Formosa Univ, Huwei, Yunlin, Taiwan) (ISI 2.616/17, WOS:000319245300004, ScDirect) [A2'08]

215.     A. Smith, S. Gadoue, M. Armstrong, J. Finch, Improved method for the scalar control of induction motor drives, IET Electric Power Applications, ISSN 1751-8660, vol. 7, no. 6, pp. 487-498, Jul. 2013, 10.1049/iet-epa.2012.0384 (*Newcastle Univ, UK; Alexandria Univ, Egypt) (ISI 2.211/17, WOS:000326403400007, IEEE) [A2'10], [A2'12]

216.     R. Duma, M. Trusca, P. Dobra, Embedded rapid control prototyping: BLDC motor control, Proceedings of the Romanian Academy, Series A, ISSN 1454-9069, vol. 14, no. 2, pp. 144-151, Apr.-Jun. 2013. (Technical Univ of Cluj-Napoca, Romania) (ISI 1.752/17, WOS:000320476000009, acad.ro-pdf) [A1'08]

217.     A. Sivaprakasam, T. Manigandan, A simple method to reduce torque ripple and mechanical vibration in direct torque controlled permanent magnet synchronous motor, Journal of Vibroengineering, ISSN 1392-8716, vol. 15, no. 2, pp. 658-674, Jun. 2013, 10.1177/1077546313492182 (Kongu Eng. College, India; P.A. College of Eng. and Tech., India) (ISI-ESCI 0.398/17, WOS:000320714500015, jve) [A1'08]

218.     R. Morales-Caporal, E. Bonilla-Huerta, C. Hernandez, M.A. Arjona, M. Pacas, Transducerless acquisition of the rotor position for predictive torque controlled PM synchronous machines based on a DSP-FPGA digital system, IEEE Transactions on Industrial Informatics, ISSN 1551-3203, vol. 9, no. 2, pp. 799-807, May 2013, 10.1109/TII.2012.2225633 (Technological Inst. of Apizaco, Mexico; Technological Inst. of La Laguna, Torreon, Mexico; Univ of Siegen, Germany) (ISI 5.43/17, WOS:000313706700023, IEEE) [A2'08]

219.     S. Alepuz, A. Calle-Prado, S. Busquets-Monge, S. Kouro, B. Wu, Use of stored energy in PMSG rotor inertia for low-voltage ride-through in back-to-back NPC converter-based wind power systems, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 60, no. 5, pp. 1787-1796, May 2013, 10.1109/TIE.2012.2190954 (Technical Univ of Catalonia, Barcelona, Spain; Universidad Tecnica Federico Santa Maria, Valparaiso, Chile; Ryerson Univ, Toronto, Canada) (ISI 7.05/17, WOS:000314365400008, IEEE) [A1'07]

220.     E. Al-Nabi, B. Wu, N. Zargari, V. Sood, Sensorless control of CSC-fed IPM machine for zero- and low speed operations using pulsating HFI method, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 60, no. 5, pp. 1711-1723, May 2013, 10.1109/TIE.2012.2191752 (Ryerson Univ, Toronto, Canada; Rockwell Automation, Cambridge, Canada; Univ of Ontario Inst. of Technology, Oshawa, Canada) (ISI 7.05/17, WOS:000314365400001, IEEE) [A1'08]

221.     E.G. Shehata, Speed sensorless torque control of an IPMSM drive with online stator resistance estimation using reduced order EKF, International Journal of Electrical Power & Energy Systems, Elsevier, ISSN 0142-0615, vol. 47, pp. 378-386, May 2013, 10.1016/j.ijepes.2012.10.068 (Minia Univ, Egypt) (ISI 3.61/17, WOS:000315002000036, ScDirect) [A1'08], [A1'09]~

222.     L. Xiao, S. Huang, K. Lu, DC-bus voltage control of grid-connected voltage source converter by using space vector modulated direct power control under unbalanced network conditions, IET Power Electronics, ISSN 1755-4535, vol. 6, no. 5, pp. 925-934, May 2013, 10.1049/iet-pel.2012.0576 (*Hunan Univ, Changsha, China; *Aalborg Univ, Denmark) (ISI 2.267/17, WOS:000321709000011, IEEE) [A1'07]

223.     J.D.M. De Kooning, J. Van de Vyver, T.L. Vandoorn, B. Meersman, L. Vandevelde, Impact of speed ripple on the back-emf waveform of permanent magnet synchronous machines, IET Electric Power Applications, ISSN 1751-8660, vol. 7, no. 5, pp. 400-407, May 2013, 10.1049/iet-epa.2012.0334 (*Ghent Univ, Belgium) (ISI 2.211/17, WOS:000321717700008, IEEE) [A2'09]

224.     K. Vijayakumar, N. Kumaresan, N.G.A. Gounden, Operation of inverter-assisted wind-driven slip-ring induction generator for stand-alone power supplies, IET Electric Power Applications, ISSN 1751-8660, vol. 7, no. 4, pp. 256-269, Apr. 2013, 10.1049/iet-epa.2012.0139 (National Inst. of Technology, Tiruchirappalli, India) (ISI 2.211/17, WOS:000321716900003, IEEE) [A3'06]

225.     P. Stumpf, R.K. Jardan, I. Nagy, Analysis of the impact of space vector modulation techniques on the operation of ultrahigh speed induction machines, Mathematics and Computers in Simulation, ISSN 0378-4754, (ELECTRIMACS 2011- part I), vol. 90, pp. 132-144, Apr. 2013, 10.1016/j.matcom.2012.09.003 (Budapest Univ of Technology and Economics, Hungary) (ISI 1.476/17, WOS:000321407800011, ScDirect) [A2'10]

226.     G. Wang, Z. Li, G. Zhang, Y. Yu, D. Xu, Quadrature PLL-based high-order sliding-mode observer for IPMSM sensorless control with online MTPA control strategy, IEEE Transactions on Energy Conversion, ISSN 0885-8969, vol. 28, no. 1, pp. 214-224, Mar. 2013, 10.1109/TEC.2012.2228484 (*Harbin Inst. of Technol., China) (ISI 3.767/17, WOS:000320996000022, IEEE) [A1'09]

227.     L. Yuan, F. Xiao, J. Shen, M. Chen, Q. Shi, L. Quan-feng, Sensorless control of high-power interior permanent-magnet synchronous motor drives at very low speed, IET Electric Power Applications, ISSN 1751-8660, vol. 7, no. 3, pp. 199-206, Mar. 2013, 10.1049/iet-epa.2012.0103 (Naval Univ of Eng., Wuhan, China; *Zhejiang Univ, Hangzhou, China; Xi'an Jiaotong Univ, China) (ISI 2.211/17, WOS:000321716100005, IEEE) [A1'08], [A2'09]

228.     G. Wang, R. Yang, D. Xu, DSP-based control of sensorless IPMSM drives for wide-speed-range operation, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 60, no. 2, pp. 720-727, Feb. 2013, 10.1109/TIE.2012.2205360 (*Harbin Inst. of Technol., China) (ISI 7.05/17, WOS:000309054800030, IEEE) [A1'08], [A1'09]

229.     J. Guzinski, H. Abu-Rub, Speed sensorless induction motor drive with predictive current controller, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 60, no. 2, pp. 699-709, Feb. 2013, 10.1109/TIE.2012.2205359 (Gdansk Univ of Technology, Poland; Texas A&M Univ at Qatar, Doha, Qatar) (ISI 7.05/17, WOS:000309054800028, IEEE) [A2'08]

230.     C.-H. Choi, J.-K. Seok, R.D. Lorenz, Wide-speed direct torque and flux control for interior PM synchronous motors operating at voltage and current limits, IEEE Transactions on Industry Applications, ISSN 0093-9994, vol. 49, no. 1 , pp. 109-117, Jan.-Feb. 2013, 10.1109/TIA.2012.2229684 (Yeungnam Univ, Kyungsan, Korea; *Univ of Wisconsin-Madison, USA) (ISI 2.743/17, WOS:000313726900013, IEEE) [A1'09]

231.     A. Khlaief, M. Boussak, M. Gossa, Model reference adaptive system based adaptive speed estimation for sensorless vector control with initial rotor position estimation for interior permanent magnet synchronous motor drive, Electric Power Components and Systems, Taylor & Francis, ISSN 1532-5008, vol. 41, no. 1, pp. 47-74, Jan. 2013, 10.1080/15325008.2012.732657 (Ecole Centrale Marseille, France; Ecole Superieure des Sciences et Techniques de Tunis, Tunisia) (ISI 1.144/17, WOS:000312442200004, tandfonline) [A1'02], [A2'02]

232.     Z.Q. Zhu, J. Hu, Electrical machines and power-electronic systems for high-power wind energy generation applications Part II - Power electronics and control systems, COMPEL - The Int. Journal for Computation and Mathematics in Electrical and Electronic Eng., ISSN 0332-1649, vol. 32, no. 1, pp. 34-71, Jan. 2013, 10.1108/03321641311293740 (*Univ of Sheffield, UK) (ISI 0.534/17, WOS:000314484400003, Emerald) [A2'08], [A1'09], [A2'09]

233.     M. Carpaneto, P. Fazio, M. Marchesoni, G. Parodi, Dynamic performance evaluation of sensorless permanent-magnet synchronous motor drives with reduced current sensors, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 59, no. 12, pp. 4579-4589, Dec. 2012, 10.1109/TIE.2012.2185010 (Univ of Genova, Italy) (ISI 7.05/17, WOS:000306142000008, IEEE) [A1'08], [A2'08]

234.     Z. Xu, M. Rahman, Comparison of a sliding observer and a Kalman filter for direct-torque-controlled IPM synchronous motor drives, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 59, no. 11, 4179-4188, Nov. 2012, 10.1109/TIE.2012.2188252 (Univ of Nottingham Ningbo, China, *Univ of New South Wales, Sydney, Australia) (ISI 7.05/17, WOS:000305748500019, IEEE) [A1'06]

235.     V. Smidl, Z. Peroutka, Advantages of square-root extended Kalman filter for sensorless control of ac drives, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 59, no. 11, pp. 4189-4196, Nov. 2012, 10.1109/TIE.2011.2180273 (Univ of West Bohemia, Pilsen, Czech Rep.) (ISI 7.05/17, WOS:000305748500020, IEEE) [A1'09]

236.     M. Hajian, J. Soltani, G.R.A. Markadeh, Non-linear direct torque control of sensorless induction motor drives with parameter identification and capable for very low speeds, Electric Power Components and Systems, Taylor & Francis, ISSN 1532-5008, vol. 40, no. 15, pp. 1656-1675, Aug. 2012, 10.1080/15325008.2012.716494 (*Univ of Aberdeen, UK; Azad Univ, Khominishahr Branch, Iran; Shahrekord Univ, Shahrekord, Iran) (ISI 1.144/17, WOS:000311789200002, tandfonline) [A1'06]

237.     N.A. Rahim, M.A. Rahman, M.F.M. Elias, H.W. Ping, Implementation of speed sensorless drives for IPMSM based on simplified stator flux observer, Int. Review of Electrical Eng.-IREE, ISSN 1827-6660, vol.7, no. 4 , pp. 4879-4884, Aug. 2012. (Univ of Malaya, Kuala Lumpur, Malaysia) (ISI, WOS:000309638300028, Scopus, prize) [A2'09].

238.     S.A. Davari, D.A. Khaburi, F. Wang, R. Kennel, Using full order and reduced order observers for robust sensorless predictive torque control of induction motors, IEEE Transactions on Power Electronics, ISSN 0885-8993, vol. 27, no. 7, pp. 3424-2433, Jul. 2012, 10.1109/TPEL.2011.2179812 (Iran Univ of Science and Technology, Tehran, Iran; *Technical Univ of Munich, Germany) (ISI 6.812/17, WOS:000302534000029, IEEE) [A1'06]

239.     Y. Wang, Z. Deng, An integration algorithm for stator flux estimation of a direct-torque-controlled electrical excitation flux-switching generator, IEEE Transactions on Energy Conversion, ISSN 0885-8969, vol. 27, no. 2, pp. 411-420, Jun. 2012, 10.1109/TEC.2012.2188139 (*Nanjing Univ of Aeronautics and Astronautics, China) ((ISI 3.767/17, WOS:000304247200020, IEEE) [A1'08]

240.     M.A. Hamida, A. Glumineau, J. de Leon, Robust integral backstepping control for sensorless IPM synchronous motor controller, Journal of the Franklin Institute-Engineering and Applied Mathematics, Elsevier, ISSN 0016-0032, vol. 349, no. 5, pp. 1734-1757, Jun. 2012, 10.1109/TPEL.2011.2179812 (LUNAM Univ, Nantes, France; Univ Autonoma de Nuevo Leon, Mexico) (ISI 3.576/17, WOS:000304631500009, ScDirect) [A1'08]

241.     A.I. Leon-Sanchez, E. Romero-Cadaval, M.I. Milanes-Montero, V.M. Minambres-Marcos, Effect of controller coefficients and converter switching frequency on performance and efficiency of electric drives used in electrical vehicles, Int. Journal of Vehicle Design, Inderscience Pub., ISSN 0143-3369, vol. 58, no. 2-4, pp. 325-347, Jun. 2012, 10.1504/IJVD.2012.047403 (Univ of Extremadura, Badajoz, Spain) (ISI 0.652/17, WOS:000307080300012, inderscience) [A2'08], [A3'08], [A4'08], [A2'09], [A5'10], [A6'10]

242.     E.K. Beser, S. Camur, B. Arifoglu, E. Beser, Design and application of a hybrid motor with a rotor structure having changeable magnet and reluctance combination, Int. Review of Electrical Eng.-IREE, ISSN 1827-6660, vol. 7, no, 2, Part. A, pp. 3828-3835, Apr. 2012. (Kocaeli Univ, Turkey) (ISI, WOS:000305258900018, Scopus, prize) [A2'06].

243.     V. Leu, H. Choi, J. Jung, Fuzzy sliding mode speed controller for PM synchronous motors with a load torque observer, IEEE Transactions on Power Electronics, ISSN 0885-8993, vol. 27, no. 3, pp. 1530-1539, Mar. 2012, 10.1109/TPEL.2011.2161488 (Dongguk Univ, Seoul, Korea) (ISI 6.812/17, WOS:000304263700032, IEEE) [A2'06]

244.     M. Hinkkanen, T. Tuovinen, L. Harnefors, J. Luomi, A combined position and stator-resistance observer for salient PMSM drives: Design and stability analysis, IEEE Transactions on Power Electronics, ISSN 0885-8993, vol. 27, no. 2, pp. 601-609, Feb. 2012, 10.1109/TPEL.2011.2118232 (*Aalto Univ, Espoo, Finland; *Royal Inst. of Technology, Stockholm, Sweden; ABB Power Systems, Ludvika, Sweden) (ISI 6.812/17, WOS:000298565900001, IEEE) [A1'09]

245.     O. Wallmark, J. Galic, H. Mosskull, Sensorless control of permanent-magnet synchronous motors adopting indirect self-control, IET Electric Power Applications, ISSN 1751-8660, vol. 6 , no. 1, pp. 12-18, Jan. 2012, 10.1049/iet-epa.2010.0290 (*Royal Inst. of Technology, Stockholm, Sweden; Bombardier Transportat AB, Vastera, Sweden) (ISI 2.211/17, WOS:000299015200002, IEEE) [A2'06]

246.     G.H. Lee, W. Choi, B.H. Lee, J.W. Jung, J.P. Hong, Inductance measurement of interior permanent magnet synchronous motor in stationary frame of reference, Journal of Magnetics, ISSN 1226-1750, vol. 16, no. 4, pp. 391-397, Dec. 2011, 10.4283/JMAG.2011.16.4.391 (*Hanyang Univ, Seoul, Korea; Kookmin Univ, Seoul, Korea) (ISI 0.652/17, WOS:000298866000012, koreascience) [A1'08]

247.     G. Wang, F. Wu, R. Yang, Q. Gao, D. Xu, Starting and ultra low-speed control strategy for gearless traction permanent magnet synchronous machine, Int. Review of Electrical Eng.-IREE, ISSN 1827-6660, vol. 6, no. 7, Part. A, pp. 2955-2964, Dec. 2011. (*Harbin Inst. of Technol., China) (ISI, WOS:000300470400014, ebsco, Scopus) [A3'10].

248.     M. Ezzata, J. de Leonb, A. Glumineau, Sensorless speed control of PMSM via adaptive interconnected observer, Int. Journal of Control, Taylor & Francis, ISSN 0020-7179, vol. 84, no. 11, pp. 1926-1943, Nov. 2011, 10.1080/00207179.2011.629684 (LUNAM Univ, Ecole Centrale de Nantes, France; Univ Autonoma de Nuevo Leon, Mexico) (ISI 2.101/17, WOS:000296767700014, tandfonline) [A1'02]

249.     M. Jebali-Ben Ghorbal, J. Arbi, I. Slama-Belkhodja, Soft direct power control reconfiguration from no-load to grid connected mode of DFIG based wind system, EPE Journal, ISSN 0939-8368, vol. 21, no. 4, pp. 25-33, Oct.-Dec. 2011, 10.1080/09398368.2011.11463807 (Univ Tunis El Manar, Tunis, Tunisia) (ISI 0.167/17, WOS:000303267200004, epe) [A3'06]

250.     G. Wang, G. Li, Y. Yu, F. Zhang, D. Xu, Rotor position robust estimation method for sensorless IPMSM at low speeds including standstill operation, Int. Review of Electrical Eng.-IREE, ISSN 1827-6660, vol. 6, no. 5, Part. A, pp. 2329-2337, Oct. 2011. (*Harbin Inst. of Technol., China) (ISI, WOS:000298305200032, ebsco, Scopus) [A1'08].

251.     G. Pellegrino, R. Bojoi, P. Guglielmi, Unified direct-flux vector control for AC motor drives, IEEE Transactions on Industry Applications, ISSN 0093-9994, vol. 47, no. 5, pp. 2093-2102, Sep./Oct. 2011, 10.1109/TIA.2011.2161532 (Politecnico di Torino, Italy) (ISI 2.743/17, WOS:000295139500012, IEEE) [A2'08]

252.     H. Kim, J. Son, J. Lee, A high-speed sliding-mode observer for the sensorless speed control of a PMSM, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 58, no. 9, pp. 4069-4077, Sep. 2011, 10.1109/TIE.2010.2098357 (Pusan National Univ, Busan, Korea) (ISI 7.05/17, WOS:000293920300036, IEEE) [A1'06]

253.     S.-Y. Kim, C. Choi, K. Lee, W. Lee, An improved rotor position estimation with vector-tracking observer in PMSM drives with low-resolution Hall-effect sensors, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 58, no. 9, pp. 4078-4086, Sep. 2011, 10.1109/TIE.2010.2098367 (Changwon National Univ, Korea) (ISI 7.05/17, WOS:000293920300037, IEEE) [A2'08]

254.     J.S. Lee, C.-H. Choi, J.-K. Seok, R.D. Lorenz, Deadbeat-direct torque and flux control of interior permanent magnet machines with discrete time stator current and stator flux linkage observer, IEEE Transactions on Industry Applications, ISSN 0093-9994, vol. 47, no. 4, pp. 1749-1758, Jul./Aug. 2011, 10.1109/TIA.2011.2154293 (*Univ of Wisconsin-Madison, US; Yeungnam Univ, Gyeongsan, Korea) (ISI 2.743/17, WOS:000293708100025, IEEE) [A1'08]

255.     Y. Zhang, J.G. Zhu, W. Xu, Y. Guo, A simple method to reduce torque ripple in direct torque-controlled permanent-magnet synchronous motor by using vectors with variable amplitude and angle, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 58, no. 7, pp. 2848-2859, Jul. 2011, 10.1109/TIE.2010.2076413 (*Univ of Technology Sydney, Australia) (ISI 7.05/17, WOS:000293832600030, IEEE) [A1'08]

256.     R. Blasco-Gimenez, S. Ano-Villalba, J. Rodriguez-D'Derlee, S. Bernal-Perez, F. Morant, Diode-based HVdc link for the connection of large offshore wind farms, IEEE Transactions on Energy Conversion, ISSN 0885-8969, vol. 26 , no. 2, pp. 615-626, Jun. 2011, 10.1109/TEC.2011.2114886 (*Politecnic Univ of Valencia, Spain) (ISI 3.767/17, WOS:000290735200023, IEEE) [A1'07]

257.     J.B. Liu, T.A. Nondahl, P.B. Schmidt, S. Royak, M. Harbaugh, Rotor position estimation for synchronous machines based on equivalent emf, IEEE Transactions on Industry Applications, ISSN 0093-9994, vol. 47, no. 3, pp. 1310-1318, May/Jun. 2011, 10.1109/TIA.2011.2125935 (Rockwell Automat, Milwaukee, WI, USA) (ISI 2.743/17, WOS:000290733800029, IEEE) [A2'08], [A1'09]

258.     M.-Y. Wei, T.-H. Liu, C.-K. Lin, Design and implementation of a passivity-based controller for sensorless synchronous reluctance motor drive systems, IET Electric Power Applications, ISSN 1751-8660, vol. 5 , no. 4, pp. 335-349, Apr. 2011, 10.1049/iet-epa.2010.0061 (National Taiwan Univ of Science and Technology, Taiwan) (ISI 2.211/17, WOS:000290672400002, IEEE) [A2'08]

259.     T. Sutikno, A.Z. Jidin, A. Jidin, N.R.N. Idris, FPGA based high performance torque and flux estimator, Int. Review of Electrical Eng.-IREE, ISSN 1827-6660, vol. 6, no. 1, Part A, pp. 207-214, Feb. 2011. (Univ Ahmad Dahlan, Yogyakarta, Indonesia; Ecole Super. Ingenieur Elect. & Electrotech. Paris E, France; Univ Teknikal Malaysia Melaka, Malaysia; Univ Teknologi Malaysia, Johor Baharu, Malaysia) (ISI, WOS:000289220500024, eprints, prize) [A2'08]

260.     Y. Zhang, J. Zhu, Direct torque control of permanent magnet synchronous motor with reduced torque ripple and commutation frequency, IEEE Transactions on Power Electronics, ISSN 0885-8993, vol. 26, no. 1, pp. 235-248, Jan. 2011, 10.1109/TPEL.2010.2059047 (*Univ of Technology Sydney, Australia) (ISI 6.812/17, WOS:000285843000023, IEEE) [A1'08]

261.     A. Maalouf, L. Idkhajine, S.L. Ballois, E., Monmasson, Field programmable gate array-based sensorless control of a brushless synchronous starter generator for aircraft application, IET Electric Power Applications, ISSN 1751-8660, vol. 5 , no. 1, pp. 181-192, Jan. 2011, 10.1049/iet-epa.2010.0044 (Thales Avionics Electrical Systems, France; Univ Cergy Pontoise, France) (ISI 2.211/17, WOS:000286931400018, IEEE) [A1'08]

262.     Tzu-shien Chuang, Line back-EMF oriented 6/4 pole PMA-SynRM drive based on third harmonic current injection, European Transactions on Electrical Power, John Wiley & Sons, ISSN 1430-144X, vol. 21, no. 1, pp. 865-876, Jan. 2011, 10.1002/etep.482 (Ming Chi Univ of Technology Taiwan, Taiwan) (ISI 0.886/14, WOS:000288132700065, wiley) [A2'08], [A1'09], [A2'09]

263.     A. Amiri, M. Mohamadian M. Dehghan, A. Sadeghilarijani, Adaptive compensation of VSI non-idealities to improve sensorless control of PMSM in low speed, Int. Review of Electrical Eng.-IREE, ISSN 1827-6660, vol. 5, no. 6, part A, pp. 2610-2622, Dec. 2010. (Tarbiat Modares Univ, Tehran, Iran) (ISI 1.364/10, WOS:000287558100013, Scopus) [A1'08].

264.     Dongkyoung Chwa, Kyo-Beum Lee, Variable structure control of the active and reactive powers for a DFIG in wind turbines, IEEE Transactions on Industry Applications, ISSN 0093-9994, vol. 46, no. 6, pp. 2545-2555, Nov./Dec. 2010, 10.1109/TIA.2010.2073674 (Ajou Univ, Suwon, Korea) (ISI 2.743/17, WOS:000284418600050, IEEE) [A2'06]

265.     S. Sayeef, G. Foo, M.F. Rahman, Rotor position and speed estimation of a variable structure direct-torque-controlled IPM synchronous motor drive at very low speeds including standstill, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 57, No. 11, pp. 3715-3723, Nov. 2010, 10.1109/TIE.2010.2041730 (*Univ of Wollongong, Australia; *Univ of New South Wales, Sydney, Australia) (ISI 7.05/17, WOS:000283441900018, IEEE) [A1'08]

266.     G. Pellegrino, R.I. Bojoi, P. Guglielmi, F. Cupertino, Accurate inverter error compensation and related self-commissioning scheme in sensorless induction motor drives, IEEE Transactions on Industry Applications, ISSN 0093-9994, vol. 46, no. 5, pp. 1970-1978, Sep./Oct. 2010, 10.1109/TIA.2010.2057395 (Politecnico di Torino, Italy; Politecnico di Bari, Italy) (ISI 2.743/17, WOS:000284584900035, IEEE) [A1'06]

267.     K.-K. Shyu, J.-K. Lin, V.-T. Pham, M.-J.Yang, T.-W. Wang, Global minimum torque ripple design for direct torque control of induction motor drives, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 57, no. 9, pp. 3148-3156, Sep. 2010, 10.1109/TIE.2009.2038401 (National Central Univ, Taoyuan, Taiwan) (ISI 7.05/17, WOS:000282970300026, IEEE) [A1'06]

268.     M. Barcaro, A. Faggion, L. Sgarbossa, N. Bianchi, S. Bolognani, Performance evaluation of an integrated starter alternator using an interior permanent magnet machine, IET Electric Power Applications, ISSN 1751-8660, vol. 4, no. 7, pp. 539-546, Aug. 2010, 10.1049/iet-epa.2009.0216 (*Univ of Padova, Italy) (ISI 2.211/17, WOS:000280361500006, IEEE) [A2'06]

269.     G. Pellegrino, P. Guglielmi, E. Armando, R.I. Bojoi, Self-commissioning algorithm for inverter nonlinearity compensation in sensorless induction motor drives, IEEE Transactions on Industry Applications, ISSN 0093-9994, vol. 46, no. 4, pp. 1416-1424, Jul./Aug. 2010, 10.1109/TIA.2010.2049554 (Politecnico di Torino, Italy) (ISI 2.743/17, WOS:000282543800019, IEEE) [A1'06]

270.     C. Ortega, A. Arias, C. Caruana, J. Balcells, G.M. Asher, Improved waveform quality in the direct torque control of matrix converter-fed PMSM drives, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 57, no. 6, pp. 2101-2110, Jun. 2010, 10.1109/TIE.2009.2033084 (Escola Univ Salesiana de Sarria, Barcelona, Spain; Technical Univ of Catalonia, Barcelona, Spain; Univ of Malta, Msida, Malta; *Univ of Nottingham, UK) (ISI 7.05/17, WOS:000277664000027, IEEE) [A1'06]

271.     F. Genduso, R. Miceli, C. Rando, G.R. Galluzzo, Back emf sensorless-control algorithm for high-dynamic performance PMSM, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 56, no. 6, pp. 2092-2100, Jun. 2010, 10.1109/TIE.2009.2034182 (*Univ of Palermo, Italy) (ISI 7.05/17, WOS:000277664000026, IEEE) [A1'08]

272.     A.G. Espinosa, J.A. Rosero, J. Cusido, L. Romeral, J.A. Ortega, Fault detection by means of Hilbert-Huang transform of the stator current in a PMSM with demagnetization, IEEE Transactions on Energy Conversion, ISSN 0885-8969, vol. 25, no. 2, pp. 312-318, Jun. 2010, 10.1109/TEC.2009.2037922 (Technical Univ Catalonia, Terrassa, Spain) (ISI 3.767/17, WOS:000278063800006, IEEE) [A1'08]

273.     F.R. Salmasi, T.A. Najafabadi, P.J. Maralani, An adaptive flux observer with online estimation of dc-link voltage and rotor resistance for VSI-based induction motors, IEEE Transactions on Power Electronics, ISSN 0885-8993, vol. 25, no. 5, pp. 1310-1319, May 2010, 10.1109/TPEL.2009.2038268 (*Univ of Tehran, Iran) (ISI 6.812/17, WOS:000277502000007, IEEE) [A1'06], [A2'08]

274.     G. Foo, M.F. Rahman, Sensorless sliding-mode MTPA control of an IPM synchronous motor drive using a sliding-mode observer and HF signal injection, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 57, no. 4, pp. 1270-1278, Apr. 2010, 10.1109/TIE.2009.2030820 (*Univ of New South Wales, Sydney, Australia) (ISI 7.05/17, WOS:000275369400016, IEEE) [A2'06], [A1'08]

275.     F.M.L. De Belie, P. Sergeant, J.A. Melkebeek, A sensorless drive by applying test pulses without affecting the average-current samples, IEEE Transactions on Power Electronics, ISSN 0885-8993, vol. 25, no. 4, pp. 875-888, Apr. 2010, 10.1109/TPEL.2009.2036617 (*Ghent Univ, Belgium) (ISI 6.812/17, WOS:000276417500008, IEEE) [A2'08]

276.     G. Foo, M.F. Rahman, Direct torque control of an IPM-synchronous motor drive at very low speed using a sliding-mode stator flux observer, IEEE Transactions on Power Electronics, ISSN 0885-8993, vol. 25, no. 4, pp. 933-942, Apr. 2010, 10.1109/TPEL.2009.2036354 (*Univ of New South Wales, Sydney, Australia) (ISI 6.812/17, WOS:000276530100005, IEEE) [A2'06], [A1'08], [A2'08], [A3'08], [A1'09]

277.     J.-L. Chen, T.-H.Liu, C.-L. Chen, Design and implementation of a novel high-performance sensorless control system for interior permanent magnet synchronous motors, IET Electric Power Applications, ISSN 1751-8660, vol. 4, no. 4, pp. 226-240, Apr. 2010, 10.1049/iet-epa.2009.0214 (*Nat. Taiwan Univ of Sci. & Technol., Taipei, Taiwan) (ISI 2.211/17, WOS:000276589800002, IEEE) [A1'08], [A1'09]

278.     L.M. Grzesiak, G. Gabka, Sensorless control of AC induction motor based on direct torque control, Przeglad Electrotechniczny, ISSN 0033-2097, vol. 86, no. 4, pp. 273-279, Apr. 2010. (Warsaw Univ of Technol., Poland) (ISI, WOS:000276312500065, pe, icm.edu.pl) [A3'02].

279.     Min-Sik Rho, Sam-Young Kim, Development of robust starting system using sensorless vector drive for a microturbine, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 57, no. 3, pp. 1063-1073, Mar. 2010, 10.1109/TIE.2009.2028356 (Silla Univ, Busan, Korea; Changwon National Univ, Korea) (ISI 7.05/17, WOS:000274391300032, IEEE) [A4'08]

280.     G. Foo, S. Sayeef, M.F. Rahman, Low-speed and standstill operation of a sensorless direct torque and flux controlled IPM synchronous motor drive, IEEE Transactions on Energy Conversion, ISSN 0885-8969, vol. 25, no. 1, pp. 25-33, Mar. 2010, 10.1109/TEC.2009.2025407 (*Univ of New South Wales, Sydney, Australia) (ISI 3.767/17, WOS:000274795000004, IEEE) [A2'06], [A1'08]

281.     G. Foo, M.F Rahman, Sensorless vector control of interior permanent magnet synchronous motor drives at very low speed without signal injection, IET Electric Power Applications, ISSN 1751-8660, vol. 4, no. 3, pp. 131-139, Mar. 2010, 10.1049/iet-epa.2009.0024 (*Univ of New South Wales, Sydney, Australia) (ISI 2.211/17, WOS:000275851800001, IEEE) [A2'06], [A1'08], [A2'08], [A3'08]

282.     A. Kuperman, Y. Horen, S. Tapuchi, I. Katz, A. Abramovitz, Input-output nominalization of linear systems with slow-varying uncertainties, COMPEL The Int. Journal for Computation and Mathematics in Electrical and Electronic Eng., Special Issue: Selected papers from the 13th Power Electronics and Motion Control Conf. (EPE-PEMC 2008), ISSN 0332-1649, vol. 29, no. 1, pp. 72-89, Feb. 2010, 10.1108/03321641011007975 (*Univ of Liverpool, UK; Sami-Shamoon College of Eng., Beer-Sheva, Israel) (ISI 0.534/17, WOS:000274517900006, Emerald) [A3'99]

283.     G. Foo, M.F. Rahman, Sensorless direct torque and flux-controlled IPM synchronous motor drive at very low speed without signal injection, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 57, no. 1, pp. 395-403, Jan. 2010, 10.1109/TIE.2009.2030815 (*Univ of New South Wales, Sydney, Australia) (ISI 7.05/17, WOS:000272723000045, IEEE) [A2'06], [A1'08] [A2'08] [A3'08]

284.     G. Bisheimer, M.O. Sonnaillon, C.H.D. Angelo, J.A. Solsona, G.O. Garcya, Full speed range permanent magnet synchronous motor control without mechanical sensors, IET Electric Power Applications, ISSN 1751-8660, vol. 4, no. 1, pp. 35-44 Jan. 2010, 10.1049/iet-epa.2008.0187 (Concejo Nac. de Investig. Cientificas y Tec., Argentina; National Univ of Rio Cuarto, Argentina) (ISI 2.211/17, WOS:000273888900004, IEEE) [A1'08]

285.     Shanshan Wu, D.D. Reigosa, Y. Shibukawa, M.A. Leetmaa, R.D. Lorenz, Yongdong Li, Interior permanent-magnet synchronous motor design for improving self-sensing performance at very low speed, IEEE Transactions on Industry Applications, ISSN 0093-9994, vol. 45, no. 6, pp. 1939-1946, Nov./Dec. 2009, 10.1109/TIA.2009.2031861 (Shanghai Aircraft Design and Research Institute, China; Univ of Oviedo, Gijon, Spain; Nissan Motor Co., Atsugi, Japan; *Univ of Wisconsin-Madison, US; *Tsinghua Univ, Beijing, China) (ISI 2.743/17, WOS:000271952200003, IEEE) [A2'08]

286.     A. Bellini, G. Franceschini, E. Lorenzani, C. Tassoni, Distributed cogeneration plants Field-oriented control of self-excited induction generator IEEE Industry Applications Magazine, ISSN 1077-2618, vol. 15, no. 6, pp. 61-68, Nov./Dec. 2009, 10.1109/MIAS.2009.934447 (Univ of Modena & Reggio Emilia, Modena, Italy; Univ of Parma, Italy) (ISI 0.864/17, WOS:000270947500010, IEEE) [A3'06]

287.     T. Bhattacharya, L. Umanand, Negative sequence compensation within fundamental positive sequence reference frame for a stiff micro-grid generation in a wind power system using slip ring induction machine, IET Electric Power Applications, ISSN 1751-8660, vol. 3, no. 6, pp. 520-530, Nov. 2009, 10.1049/iet-epa.2008.0245 (*Indian Inst. of Sci., Bangalore, India) (ISI 2.211/17, WOS:000271569800003, IEEE) [A3'06]

288.     T.A. Nadjafabadi, F.R. Salmasi, A flux observer with online estimation of core loss and rotor resistances for induction motors, Int. Review of Electrical Eng.-IREE, ISSN 1827-6660, vol. 4, no. 5, Part A, pp. 816-824, Oct. 2009. (*Univ of Tehran, Iran) (ISI 0.570/09, WOS:000273098700015, Scopus) [A1'06].

289.     K.C. Veluvolu, Y.C. Soh, Discrete-time sliding mode state and unknown inputs estimations for nonlinear systems, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 56, no. 9, pp. 3443-3452, Sep. 2009, 10.1109/TIE.2008.2007035 (Kyungpook Nat. Univ, Daegu, Korea; *Nanyang Technol. Univ, Singapore) (ISI 7.05/17, WOS:000268896000020, IEEE) [A1'06]

290.     K.C. Veluvolu, Y.C. Soh, High-gain observers with sliding mode for state and unknown input estimations, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 56, no. 9, pp. 3386-3393, Sep. 2009, 10.1109/TIE.2009.2023636 (Kyungpook Nat. Univ, Daegu, Korea; *Nanyang Technol. Univ, Singapore) (ISI 7.05/17, WOS:000268896000014, IEEE) [A1'06]

291.     Yong Feng, Jianfei Zheng, Xinghuo Yu, Nguyen Vu Truong, Hybrid terminal sliding-mode observer design method for a permanent-magnet synchronous motor control system, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 56, no. 9, pp. 3424-3431, Sep. 2009, 10.1109/TIE.2009.2025290 (Royal Melbourne Inst. of Technol., Melbourne, Australia; *Harbin Inst. of Technol., China) (ISI 7.05/17, WOS:000268896000018, IEEE) [A1'06]

292.     B. Bandyopadhyay, S. Gandhi, S. Kurode, Sliding mode observer based sliding mode controller for slosh-free motion through PID scheme, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 56, no. 9, pp. 3432-3442, Sep. 2009, 10.1109/TIE.2009.2026380 (Indian Inst. of Technol. Bombay, Mumbai, India) (ISI 7.05/17, WOS:000268896000019, IEEE) [A1'06]

293.     J. Brahmi, L. Krichen, A. Oualia, A comparative study between three sensorless control strategies for PMSG in wind energy conversion system, Applied Energy, Elsevier, ISSN 0306-2619, vol. 86, no. 9, pp. 1565-1573, Sep. 2009, 10.1016/j.apenergy.2008.11.010 (Univ of Sfax, Tunisia) (ISI 7.9/17, WOS:000265735300025, ScDirect) [A1'06]

294.     Cheng-Hung Tsai, Ming-Feng Yeh, Application of CMAC neural network to the control of induction motor drives, Applied Soft Computing, Elsevier, ISSN 1568-4946, vol. 9, no. 4, pp. 1187-1196, Sep. 2009, 10.1016/j.asoc.2009.05.001 (China Inst. of Technol., Taipei, Taiwan; Lunghwa Univ of Sci. and Tech., Taoyuan, Taiwan) (ISI 3.907/17, WOS:000269172700001, ScDirect, acm) [A1'06]

295.     G. Foo, M.F. Rahman, Direct torque and flux control of an IPM synchronous motor drive using a backstepping approach, IET Electric Power Applications, ISSN 1751-8660, vol. 3, no. 5, pp. 413-421, Sep. 2009, 10.1049/iet-epa.2008.0182 (*Univ of New South Wales, Sydney, Australia) (ISI 2.211/17, WOS:000268399900005, IEEE) [A1'08]

296.     G. Foo, M.F. Rahman, Wide speed direct torque and flux controlled IPM synchronous motor drive using a combined adaptive sliding mode observer and HF signal injection, Journal of Power Electronics, Korean Inst. Power Electronics, ISSN 1598-2092, vol. 9, no. 4, pp. 582-592, Jul. 2009. (*Univ of New South Wales, Sydney, Australia) (ISI 1.023/17, WOS:000268265300008, JPE) [A2'06], [A1'08]

297.     S. Alepuz, S. Busquets-Monge, J. Bordonau, J.A. Martinez-Velasco, C.A. Silva, J. Pontt, J. Rodriguez, Control strategies based on symmetrical components for grid-connected converters under voltage dips, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 56, no. 6, pp. 2162-2173, Jun. 2009, 10.1109/TIE.2009.2017102 (Tech. Univ of Catalonia, Barcelona, Spain; Univ Tecnica Federico Santa Maria, Valparaiso, Chile) (ISI 7.05/17, WOS:000266723000037, IEEE) [A1'07]

298.     F. Kolonic, A. Poljugan, A. Slutej, Advanced industrial crane controller based on AC wound motor, Int. Review of Electrical Eng.-IREE, ISSN 1827-6660, vol. 4, no. 3, pp. 447-460, Jun. 2009. (Univ of Zagreb, Croatia) (ISI 0.570/09, WOS:000268889600014, prize, bib.hr) [A1'06]

299.     M.N. Uddin, S.W. Nam, Development and implementation of a nonlinear-controller-based IM drive incorporating iron loss with parameter uncertainties, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 56, no. 4, pp. 1263-1272, Apr. 2009, 10.1109/TIE.2008.2007551 (Lakehead Univ, Thunder Bay, Ontario, Canada) (ISI 7.05/17, WOS:000265092100041, IEEE) [A1'06]

300.     S.B. Bodkhe, M.V. Aware, Speed-sensorless, adjustable-speed induction motor drive based on dc link measurement, Int. Journal of Physical Sciences, ISSN 1992-1950, vol. 4, no. 4, pp. 221-232, Apr. 2009. (National Inst. of Tech., Maharashtra, India) (ISI 0.540/10, WOS:000266169200010, pdf) [A1'06]

301.     T. Bhattacharya, L. Umanand, Rotor position estimator for stator flux-oriented sensorless control of slip ring induction machine, IET Electric Power Applications, ISSN 1751-8660, vol. 3, no. 1, 67-76, Jan. 2009, 10.1049/iet-epa:20080044 (*Indian Inst. of Sci., Bangalore, India) (ISI 2.211/17, WOS:000262816700007, IEEE) [A3'06]

302.     R. Morales-Caporal, M. Pacas, Encoderless predictive direct torque control for synchronous reluctance machines at very low and zero speed, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 55, no. 12, pp. 4408-4416, Dec. 2008, 10.1109/TIE.2008.2007025 (Tech. Inst. of Apizaco, Mexico; Univ of Siegen, Germany) (ISI 7.05/17, WOS:000261616700031, IEEE) [A1'06]

303.     Xing-Gang Yan, C. Edwards, Adaptive sliding-mode-observer-based fault reconstruction for nonlinear systems with parametric uncertainties, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 55, no. 11, pp. 4029-4036, Nov. 2008, 10.1109/TIE.2008.2003367 (*Leicester Univ, UK) (ISI 7.05/17, WOS:000260866600026, IEEE) [A1'06]

304.     Jian-Xin Xu, K. Abidi, Discrete-time output integral sliding-mode control for a piezomotor-driven linear motion stage, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 55, no. 11, pp. 3917-3926, Nov. 2008, 10.1109/TIE.2008.2003194 (*Nat. Univ of Singapore, Singapore) (ISI 7.05/17, WOS:000260866600014, IEEE) [A1'06]

305.     Pinjia Zhang, Bin Lu, T.G. Habetler, A remote and sensorless stator winding resistance estimation method for thermal protection of soft-starter-connected induction machines, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 55, no. 10, pp. 3611-3618, Oct. 2008, 10.1109/TIE.2008.927241 (*Georgia Inst. of Technol., Atlanta, USA) (ISI 7.05/17, WOS:000259899400014, IEEE) [A1'06]

306.     B. Castillo-Toledo, S. Di Gennaro, A.G. Loukianov, J. Rivera, Hybrid control of induction motors via sampled closed representations, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 55, no. 10, pp. 3758-3771, Oct. 2008, 10.1109/TIE.2008.928117 (Nat. Polytech. Inst., Gaudalajara, Mexico; Univ of L'Aquila, Italy) (ISI 7.05/17, WOS:000259899400030, IEEE) [A1'06]

307.     Xuefang Lin-Shi, F. Morel, J.-M. Retif, B. Allard, A new direct current control for a permanent magnet synchronous machine, Electric Power Components and Systems, Taylor & Francis, ISSN 1532-5008, vol. 36, no. 9, pp. 897-913, Sep. 2008, 10.1080/15325000801960531 (Institut National des Sciences Appliquees de Lyon, France) (ISI 1.144/17, WOS:000258621400002, tandfonline) [A1'05]

308.     G. Buja, R. Menis, Steady-state performance degradation of a DTC IM drive under parameter and transduction errors, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 55, no. 4, pp. 1749-1760, Apr. 2008, 10.1109/TIE.2008.917112 (*Univ of Padova, Italy; *Univ of Trieste, Italy) (ISI 7.05/17, WOS:000254842200028, IEEE) [A1'06]

309.     Dailin Zhang, Youping Chen, Wu Ai, Zude Zhou, Ching Tom Kong, Force ripple suppression technology for linear motors based on back propagation neural network, Chinese Journal of Mechanical Eng. (English Ed.), ISSN 1000-9345, vol. 21, no. 2, pp. 13-16, Apr. 2008, 10.3901/CJME.2008.02.013 (*Huazhong Univ of Science and Technology, Wuhan, China; *Chinese Univ of Hong Kong, China) (ISI 0.814/16, WOS:000258570000003, Compendex, Scopus, cjmenet, wanfang) [A1'02].

310.     A.A. Zaher, A nonlinear controller design for permanent magnet motors using a synchronization-based technique inspired from the Lorenz system, Chaos: An Interdisciplinary Journal of Nonlinear Science, American Inst. of Physics, New York, ISSN 1054-1500, vol. 18, no. 1, 12p, Mar. 2008, 10.1063/1.2840779 (Kuwait Univ, Safat, Kuwait) (ISI 2.415/17, WOS:000254536700011, AIP) [A2'02]

311.     T.F. Chan, W. Wang, P. Borsje, Y.K. Wong, S.L. Ho, Sensorless permanent-magnet synchronous motor drive using a reduced-order rotor flux observer, IET Electric Power Applications, ISSN 1751-8660, vol. 2, no. 2, pp. 88-98, Mar. 2008, 10.1049/iet-epa:20070234 (*Hong Kong Polytech. Univ, Kowloon, China) (ISI 2.211/17, WOS:000255035100002, IEEE) [A1'02]

312.     M. Barut, S. Bogosyan, M. Gokasan, Experimental evaluation of braided EKF for sensorless control of induction motors, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 55, no. 2, pp. 620-632, Feb. 2008, 10.1109/TIE.2007.911956 (Univ of Alaska Fairbanks, US; Istanbul Technical Univ, Turkey) (ISI 7.05/17, WOS:000252813800017, IEEE) [A1'06]

313.     A. Piippo, M. Hinkkanen, J. Luomi, Analysis of an adaptive observer for sensorless control of interior permanent magnet synchronous motors, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 55, no. 2, pp. 570-576, Feb. 2008, 10.1109/TIE.2007.911949 (Helsinki Univ of Technol., Espoo, Finland) (ISI 7.05/17, WOS:000252813800011, IEEE) [A1'99]

314.     Kyo-Beum Lee, F. Blaabjerg, An improved DTC-SVM method for sensorless matrix converter drives using an overmodulation strategy and a simple nonlinearity compensation, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 54, no. 6, pp. 3155-3166, Dec. 2007, 10.1109/TIE.2007.905914 (Ajou Univ, Suwon, Korea; *Aalborg Univ, Denmark) (ISI 7.05/17, WOS:000251457600025, IEEE) [A1'06]

315.     L.M. Grzesiak, M.P. Kazmierkowski, Improving flux and speed estimators for sensorless AC drives, IEEE Industrial Electronics Magazine, ISSN 1932-4529, vol. 1, no. 3, pp. 8-19, Fall 2007, 10.1109/MIE.2007.901483 (Warsaw Univ of Technol., Poland) (ISI 10.429/17, WOS:000207441200006, IEEE) [A3'02]

316.     Dailin Zhang, Youping Chen, Wu Ai, Zude Zhou, Precision motion control of permanent magnet linear motors, Int. Journal of Advanced Manufacturing Technology, Springer, ISSN 0268-3768, vol. 35, no. 3-4, pp. 301-308, Dec. 2007, 10.1007/s00170-006-0727-8 (*Huazhong Univ of Sci. and Tech., Wuhan, China) (ISI 2.601/17, WOS:000251278300009, SpringerLink) [A1'02]

317.     S. Kouro, R. Bernal, H. Miranda, C.A. Silva, J. Rodriguez, High-performance torque and flux control for multilevel inverter fed induction motors, IEEE Transactions on Power Electronics, ISSN 0885-8993, vol. 22, no. 6, pp. 2116-2123, Nov. 2007, 10.1109/TPEL.2007.909189 (Univ Tecnica Federico Santa Maria, Valparaiso, Chile) (ISI 6.812/17, WOS:000251297900003, IEEE) [A2'06]

318.     Dailin Zhang, Youping Chen, Ching Tom Kong, Wu Ai, Zude Zhou, Compensation scheme of position angle errors of permanent-magnet linear motors, IEEE Transactions on Magnetics, ISSN 0018-9464, vol. 43, no. 10, pp. 3868-3871, Oct. 2007, 10.1109/TMAG.2007.903163 (*Chinese Univ of Hong Kong, China; *Huazhong Univ of Sci. and Tech., Wuhan, China) (ISI 1.467/17, WOS:000249541600009, IEEE) [A1'02]

319.     T. Kim, H.-W. Lee, M. Ehsani, Position sensorless brushless DC motor/generator drives: Review and future trends, IET Electric Power Applications, ISSN 1751-8660, vol. 1, no. 4, pp. 557-564, Jul. 2007, 10.1049/iet-epa:20060358 (Univ of Michigan-Dearborn, MI, USA; Korea Railroad Research Inst., Uiwang, Korea; *Texas A&M Univ, College Station, USA) (ISI 2.211/17, WOS:000248392100006, IEEE) [A1'02]

320.     Wen-Fang Xie, Sliding-mode-observer-based adaptive control for servo actuator with friction, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 54, no. 3, pp. 1517-1527, Jun. 2007, 10.1109/TIE.2007.894718 (*Concordia Univ, Montreal, Canada) (ISI 7.05/17, WOS:000247203000025, IEEE) [A1'06]

321.     C. Silva, G.M. Asher, M. Sumner, Hybrid rotor position observer for wide speed-range sensorless PM motor drives including zero speed, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 53, no. 2, pp. 373-378, Apr. 2006, 10.1109/TIE.2006.870867 (Univ Tecnica Federico Santa Maria, Valparaiso, Chile; *Univ of Nottingham, UK) (ISI 7.05/17, WOS:000236776900004, IEEE) [A1'99]

322.     P.P. Acarnley, J.F. Watson, Review of position-sensorless operation of brushless permanent-magnet machines, IEEE Transactions on Industrial Electronics, ISSN 0278-0046, vol. 53, no. 2, pp. 352-362, Apr. 2006, 10.1109/TIE.2006.870868 (*Newcastle Univ, UK; Robert Gordon Univ, Aberdeen, UK) (ISI 7.05/17, WOS:000236776900002, IEEE) [A1'02]

323.     E. Akin, M. Karakose, A new fuzzy rule based transition algorithm between flux models for speed sensorless vector controlled induction motor drives at low speed region, Electric Power Components and Systems, Taylor & Francis, ISSN 1532-5008, vol. 33, no. 11, pp. 1269-1280, Nov. 2005, 10.1080/15325000590951807 (Firat Univ Elazig, Turkey) (ISI 1.144/17, WOS:000232495300008, tandfonline) [A1'96]

324.     B. Nahid-Mobarakeh, F. Meibody-Tabar, F.-M. Sargos, Mechanical sensorless control of PMSM with online estimation of stator resistance, IEEE Transactions on Industry Applications, ISSN 0093-9994, vol. 40, no. 2, pp. 457-471, Mar./Apr. 2004, 10.1109/TIA.2004.824490 (Centre de Robotique, CNRS EA, Cuffies, France; Institut National Polytechnique de Lorraine, Nancy, France) (ISI 2.743/17, WOS:000220477000007, IEEE) [A1'99]

325.     I. Boldea, L. Janosi, F. Blaabjerg, A modified direct torque control (DTC) of reluctance synchronous motor sensorless drive, Electric Machines and Power Systems, Taylor & Francis, ISSN 0731-356X, vol. 28, no. 2, pp. 115-128, Feb. 2000, 10.1080/073135600268405 (Univ Politehnica of Timisoara, Romania; *Aalborg Univ, Denmark) (ISI 1.144/17, WOS:000085315300002, INSPEC, Compendex, tandfonline) [A1'96]

ISI Proceedings

1.               O.S. Amosov, S.G. Amosova, S.N. Ivanov, Automatic access to the premises of increased danger using intelligent electric drive, in Proc. IEEE Int. Conf. on Applied System Invention (ICASI 2018), Chiba, Japan, ISBN 978-1-5386-1180-7, ISSN 1048-2334, pp. 532-535, Apr. 2018. 10.1109/ICASI.2018.8394306 (Komsomolsk-on-Amure State Univ, Komsomolsk-on-Amur, Russia) (ISI Proc, WOS:000434981900083, IEEE) [A2'09].

2.               L. Ortombina, F. Tinazzi, M. Zigliotto, An effective start-up algorithm for sensorless synchronous reluctance and IPM motor drives, in Proc. 12th IEEE Int. Conf. on Power Electronics and Drive Systems (PEDS 2017), Honolulu, USA, ISBN 978-1-5090-2364-6, ISSN 2164-5256, pp. 1062-1067, Dec. 2017. 10.1109/PEDS.2017.8289167 (*Univ of Padova, Italy) (ISI Proc, WOS:000426968800172, IEEE) [A4'08]

3.               G. Tatar, K. Toker, N.F. Oyman, H. Korkmaz, A dynamic analysis of BLDC motor by using Matlab/Simulink and mathematica, in Proc. Chilean Conf. on Electrical, Electronics Engineering, Information and Communication Technologies (CHILECON 2017), Pucon, Chile, ISBN 978-1-5386-3123-2, 5p, Oct. 2017. 10.1109/CHILECON.2017.8229540 (Marmara Univ Istanbul, Turkey) (ISI Proc, WOS:000425925000036, IEEE) [A2'09]

4.               M.A. Hamida, J. De Leon, Z. Tir, N. Mesbahi, A. Glumineau, A. Kadrine, Sensorless IPM synchronous motor using high order sliding mode technique with finite time rotor position observer, in Proc. 5th Int. Conf. on Electrical Engineering (ICEE-B 2017), Boumerdes, Algeria, ISBN 978-1-5386-0686-5, 7p, Oct. 2017. 10.1109/ICEE-B.2017.8192113 (Univ of Ouargla, Algeria; Univ UANL San Nicolas de los Garza Nuevo Leon, Mexico; Univ of El-Oued, Algeria; Ecole Centrale de Nantes, France) (ISI Proc, WOS:000425952600138, IEEE) [A1'08]

5.               Y.S. Lee, S.-K. Kim, Robust proportional-type position tracking controller for DC motor with disturbance observers, in Proc. 17th Int. Conf. on Control, Automation and Systems (ICCAS 2017), Jeju, Korea, ISBN 978-89-93215-14-4, ISSN 2093-7121, pp. 1161-1166, Oct. 2017. 10.23919/ICCAS.2017.8204388 (Hanbat National Univ, Daejeon, Korea) (ISI Proc, WOS:000426974400184, IEEE) [A1'08].

6.               Z. Liu, M. Yang, D. Xu, A novel algorithm for on-line inertia identification via adaptive recursive least squares, in Proc. 43rd Annual Conf. of the IEEE Industrial Electronics Society (IECON 2017), Beijing, China, ISBN 978-1-5386-1127-2, ISSN 1553-572X, pp. 2973-2978, Oct. 2017. 10.1109/IECON.2017.8216502 (*Harbin Institute of Technology, China) (ISI Proc, WOS:000427164802157, IEEE) [A1'13]

7.               C. Wu, S. Li, Q. Li, W.X. Zheng, Current control of IPMSM servo system in field-weakening region via DOB-based model predictive control, in Proc. 43rd Annual Conf. of the IEEE Industrial Electronics Society (IECON 2017), Beijing, China, ISBN 978-1-5386-1127-2, ISSN 1553-572X, pp. 2997-3002, Oct. 2017. 10.1109/IECON.2017.8216506 (*Southeast Univ, Nanjing, China; Western Sydney Univ, Sydney, Australia) (ISI Proc, WOS:000427164802161, IEEE) [A1'08]

8.               D.Q. Guan, D. Xiao, M.X. Bui, M.F. Rahman, Current derivative estimation by using AMR current sensor and its application in sensorless control of an IPMSM drive, in Proc. IEEE Energy Conversion Congress and Exposition (ECCE 2017), Cincinnati, OH, USA, ISBN 978-1-5090-2998-3, ISSN 2329-3721, pp. 1901-1908, Oct. 2017. 10.1109/ECCE.2017.8096027 (*Univ of New South Wales, Australia) (ISI Proc, WOS:000426847402027, IEEE) [A2'08]

9.               X. Wang, Sensorless direct torque control of induction motors with fault-tolerant extended Kalman filtering, in Proc. 9th IEEE Energy Conversion Congress and Exposition (ECCE 2017), Cincinnati, OH, USA, ISBN 978-1-5090-2998-3, ISSN 2329-3721, pp. 1331-1337, Oct. 2017. 10.1109/ECCE.2017.8095944 (Southern Illinois Univ, Edwardsville, IL, USA) (ISI Proc, WOS:000426847401088, IEEE) [A1'09], [A2'09]

10.           I.M. Birou, C. Rusu, S. Pavel, V. Maier, Comparative evaluation of vector control versus direct torque control for PM-SM drives, in Proc. 5th Int. Symp. Electrical and Electronics Engineering (ISEEE 2017), Galati, Romania, ISBN 978-1-5386-2059-5, ISSN 2378-3907, pp. 1-6, Oct. 2017. 10.1109/ISEEE.2017.8170670 (Technical Univ of Cluj-Napoca, Cluj-Napoca, Romania) (ISI Proc, WOS:000428234400046, IEEE) [A2'09]

11.           N. Bianchi, S. Bolognani, F. Tinazzi, M. Zigliotto, The influence of rotor design on active flux-based sensorless synchronous reluctance motor drives, in Proc. IEEE Int. Symp. on Sensorless Control for Electrical Drives (SLED 2017), Catania, Italy, ISBN 978-1-5090-6587-5, ISSN 2166-6725, pp. 7-12, Sep. 2017. 10.1109/SLED.2017.8078419 (*Univ of Padova, Italy) (ISI Proc, WOS:000414283300002, IEEE) [A2'08]

12.           A. Yousefi-Talouki, F. Stella, S. Odhano, L. De Lilo, A. Trentin, G. Pellegrino, P. Zanchetta, Sensorless control of matrix converter-fed synchronous reluctance motor drives, in Proc. IEEE Int. Symp. on Sensorless Control for Electrical Drives (SLED 2017), Catania, Italy, ISBN 978-1-5090-6587-5, ISSN 2166-6725, pp. 181-186, Sep. 2017. 10.1109/SLED.2017.8078421 (Politecnico di Torino, Italy; *Univ of Nottingham, UK) (ISI Proc, WOS:000414283300004, IEEE) [A2'08]

13.           M. Tursini, M. Villani, G. Fabri, S. Paolini, A. Credo, A. Fioravanti, Sensorless control of a synchronous reluctance motor by finite elements model results, Proc. 8th IEEE International Symposium on Sensorless Control for Electrical Drives (SLED 2017), Catania, Italy, ISBN 978-1-5090-6587-5, ISSN 2166-6725, pp. 19-24, Sep. 2017. 10.1109/SLED.2017.8078424 (Univ of L'Aquila L'Aquila, Italy) (ISI Proc, WOS:000414283300007, IEEE) [A2'06]

14.           M. Koteich, A. Messali, S. Daurelle, Self-sensing control of the externally-excited synchronous machine for electric vehicle traction application, in Proc. 8th IEEE International Symposium on Sensorless Control for Electrical Drives (SLED 2017), Catania, Italy, ISBN 978-1-5090-6587-5, ISSN 2166-6725, pp. 91-96, Sep. 2017. 10.1109/SLED.2017.8078436 (Groupe Renault; Ecole Centrale Nantes, France) (ISI Proc, WOS:000414283300019, IEEE) [A3'09]

15.           C. Rossi, M. Bertoldi, D. Pontara, I. Petrarca, D. Casadei, Stator resistance effect in the normalized unified operating point calculation of AC drives for traction application, in Proc. Int. Conf. of Electrical and Electronic Technologies for Automotive (EETA 2017), Torino, Italy, ISBN 978-8-8872-3726-9, Jun. 2017, 10.23919/EETA.2017.7993208 (*Univ of Bologna, Italy) (ISI Proc, WOS:000428718600009, IEEE) [A2'08]

16.           A. Alanazi, H. Lotfi, A. Khodaei, Coordinated AC/DC microgrid optimal scheduling, in Proc. North American Power Symposium (NAPS 2017), Morgantown, WV, USA, ISBN 978-1-5386-2699-3, ISSN 2163-49396p, Sep. 2017. 10.1109/NAPS.2017.8107310 (Univ of Denver, Denver, USA) (ISI Proc, WOS:000418465200144, IEEE) [A1'17]

17.           G. da Cunha, A.J. Rossa, J.A. Alves, E. Cardoso, Control of permanent magnet synchronous machines for subsea applications, in Proc. Industry-Applications-Society 64th Annual Petroleum and Chemical Industry Technical Conference (PCIC 2017), Calgary, Canada, ISBN 978-1-5090-5877-8, ISSN 2161-8127, ISSN 0090-3507, pp. 413-420, Sep. 2017. 10.1109/PCICON.2017.8188762 (Weg Drives & Controls, Jaragua Do Sul, Brazil; FMC Tecnol, Rio De Janeiro, Brazil) (ISI Proc, WOS:000425847800045, IEEE) [A3'12]

18.           M. Wang, Y. Xu, J. Zou, H. Lan, An optimized IF startup method for BEMF-based sensorless control of SPMSM, in Proc. IEEE Conf. and Exp. Transportation Electrification Asia-Pacific (ITEC Asia-Pacific 2017), Harbin, China, ISBN 978-1-5386-2894-2, pp. 667-672, Aug. 2017. 10.1109/ITEC-AP.2017.8080874 (*Harbin Institute of Technology, China) (ISI Proc, WOS:000426996500119, IEEE) [A4'08]

19.           Z. Liu, M. Yang, J. Long, D. Xu, Speed measurement error reduction via adaptive strong tracking Kalman filters, in Proc. IEEE Conf. and Exp. Transportation Electrification Asia-Pacific (ITEC Asia-Pacific 2017), Harbin, China, ISBN 978-1-5386-2894-2, pp. 1-5, Aug. 2017. 10.1109/ITEC-AP.2017.8080941 (*Harbin Institute of Technology, China) (ISI Proc, WOS:000426996500186, IEEE) [A1'13]

20.           C. Aijun, J. Xinhai, A stable V/F control method for permanent magnet synchronous motor drives, in Proc. IEEE Conf. and Exp. Transportation Electrification Asia-Pacific (ITEC Asia-Pacific 2017), Harbin, China, ISBN 978-1-5386-2894-2, pp. 887-891, Aug. 2017. 10.1109/ITEC-AP.2017.8080913 (Shanghai Sigriner STEP Electric Co., Shanghai, China) (ISI Proc, WOS:000426996500158, IEEE) [A2'10], [A3'12] [A1'13]

21.           W. Tu, G. Xiao, C. Suo, K. Yang, A design of sensorless permanent magnet synchronous motor drive based on V/f control, in Proc. 20th Int. Conf. on Electrical Machines and Systems (ICEMS 2017), Sydney, Australia, ISBN 978-1-5386-3246-8, pp. 1-5, Aug. 2017. 10.1109/ICEMS.2017.8056032 (*Huazhong Univ Sci. & Tech., Wuhan, Hubei, China) (ISI Proc, WOS:000425241600118, IEEE) [A1'99], [A2'08], [A2'10]

22.           C. Wei, W. Qiao, T. Kim, Low-voltage ride-through performance of sensorless vector controlled doubly-fed induction generators, in Proc. IEEE Int. Conf. on Electro Information Technology (EIT 2017), Lincoln, NE, USA, ISBN 978-1-5090-4767-3, ISSN 2154-0357, pp. 1-6, Aug. 2017. 10.1109/EIT.2017.8053419 (*Univ of Nebraska-Lincoln, NE, USA; *Texas A&M Univ-Kingsville, TX, USA) (ISI Proc, WOS:000427099000105, IEEE) [A1'07]

23.           X. Zhang, Z. Fu, J. Liu, A novel rotor position detection method of PMSM based on MEMS inertial sensor, in Proc. 20th Int. Conf. on Electrical Machines and Systems (ICEMS 2017), Sydney, Australia, ISBN 978-1-5386-3246-8, pp. 1-4, Aug. 2017. 10.1109/ICEMS.2017.8055940 (Northwestern Polytechnical Univ, Xi'an, China) (ISI Proc, WOS:000425241600026, IEEE) [ A1'08]

24.           S. Huang, X. Wu, X. Liu, J. Gao, Y. He, Overview of condition monitoring and operation control of electric power conversion systems in direct-drive wind turbines under faults, Frontiers of Mechanical Engineering, ISSN 2095-0233, Springer, pp. 1-22, Jul. 2017, 10.1007/s11465-017-0442-1 (*Hunan Univ, Changsha, China) (ISI Proc, WOS:000412544200002, link.springer) [A1'07]

25.           S. Lin, W. Zhang, Y. Ma, Speed control for sensorless SPMSM via variable structure controller and EMF-based position estimation scheme, in Proc. 36th Chinese Control Conf. (CCC 2017), Dalian, China, ISBN 978-9-8815-6393-4, ISSN 2161-2927, pp. 6552-6557, Jul. 2017, 10.23919/ChiCC.2017.8028396 (*Shanghai Jiao Tong Univ, Shanghai, China) (ISI Proc, WOS:000432015500121, IEEE) [A4'08]

26.           X. Wang, B. Cao, S.M.M. Alam, Sensorless direct torque control of surface permanent magnet synchronous motors with resilient extended Kalman filtering, in Proc. IEEE Transportation Electrification Conf. and Expo (ITEC 2017), Chicago, IL, USA, ISBN 978-1-5090-3904-3, ISSN 2377-5483, eISSN 2473-7631, pp. 714-719, Jun. 2017 10.1109/ITEC.2017.7993357 (Southern Illinois Univ Edwardsville, USA; *Univ of Pittsburgh, USA) (ISI Proc, WOS:000425846900114, IEEE) [A1'09], [A2'09]

27.           H. Shen, C. Zhang, A new efficient sensorless I/f control method for IPMSM drives, in Proc. 26th IEEE Int. Symp. on Industrial Electronics (ISIE 2017), Edinburgh, UK, ISBN 978-1-5090-1412-5, ISSN 2163-5137, pp. 209-213, Jun. 2017. 10.1109/ISIE.2017.8001249 (*Huazhong Univ of Sci. & Tech., Wuhan, Hubei, China) (ISI Proc, WOS:000426794000032, IEEE) [A3'12]

28.           J. Han, B.-H. Kim, S.-K. Sul, Effect of current measurement error in angle estimation of permanent magnet AC motor sensorless control, in Proc. 3rd IEEE Int. Future Energy Electronics Conf. and ECCE Asia (IFEEC-ECCE Asia 2017), Kaohsiung, Taiwan, ISBN 978-150905157-1, pp. 2171-2176, Jun. 2017. 10.1109/IFEEC.2017.7992388 (*Seoul National Univ, Korea) (ISI Proc, WOS:000426696300387, IEEE) [A2'08]

29.           P. Phowanna, S. Boonto, E. Mujjalinvimut, M. Konghirun, W. Lenwari, Improved performance of sliding mode observer using parameter adaptation in sensorless IPMSM drive, in Proc. 12th IEEE Conf. on Industrial Electronics and Applications (ICIEA 2017), Siem Reap, Cambodia, ISBN 978-1-5090-6161-7, ISSN 2156-2318, pp. 1635-1640, Jun. 2017. 10.1109/ICIEA.2017.8283101 (King Mongkut's Univ of Technology Thonburi Bangkok, Thailand) (ISI Proc, WOS:000426994400298, IEEE) [A1'08], [A1'09]

30.           H. Zhan, Z.Q. Zhu, M. Odavic, Z. Wu, A.S. Thomas, Robust initial phase correction strategy for zero sequence back EMF based sensorless drive under transition from current regulation control, in Proc. IEEE Int. Electric Machines and Drives Conf. (IEMDC 2017), Miami, FL, USA, ISBN:978-1-5090-4281-4, pp. 1-6, May 2017. 10.1007/s11465-017-0442-1 (*Univ of Sheffield, UK; Sheffield-Siemens Wind Power Research Centre (S2WP), Sheffield, UK) (ISI Proc, WOS:000426933000056, IEEE) [A4'08], [ A1'12]

31.           J. Liu, J. Dai, S. Royak, P. Schmidt, E. Al-nabi, T. Nondahl, Design and implementation of position sensorless starting control in industrial drives with output filter and transformer for oil/pump applications, in Proc. 32th IEEE Applied Power Electronics Conf. and Exposition (APEC 2017), Tampa, FL, USA, ISBN 978-1-5090-5366-7, ISSN 1048-2334, pp. 578-584, May 2017, 10.1109/APEC.2017.7930752 (Rockwell Automation, Milwaukee, WI, USA) (ISI Proc, WOS:000403242800086, IEEE) [A2'08], [A1'09], [A2'12], [A1'13]

32.           S. Dandan, D. Yugang, Z. Chengning, Sliding mode controller for permanent magnetic synchronous motors, Energy Procedia (ICAE-2016), ISSN 1876-6102, vol. 105, pp. 2641-2646, May 2017. (Beijing Institute of Technology, China) (ISI Proc, WOS:000404967902116, ScDirect) [A2'06]

33.           Chen Zhengshi, Liao Xiaowen, Liu Mei, A synchronous motor rotor initial position detection methods, in Proc. 7th Int. Conf. on Advanced Design and Manufacturing Engineering (ICADME 2017), Shenzhen, China, Book Series: AER-Advances in Engineering Research, ISBN 978-94-6252-349-4, ISSN 2352-5401, vol. 136, pp. 244-248, May 2017. (Guangzhou Vocat Coll Sci & Technol, Guangzhou, China) (ISI Proc, WOS:000414863400048, atlantis-press) [A1'08]

34.           P. Li, W. Sun, J. Shen, Flux observer model for sensorless control of PM BLDC motor with a damper cage, in Proc. 12th Int. Conf. on Ecological Vehicles and Renewable Energies (EVER 2017), Monte-Carlo, Monaco, ISBN 978-1-5386-1692-5, pp. 1-6, Apr. 2017, 10.1109/EVER.2017.7935909 (Research Institute of China Electronic Technology Group, Shanghai, China; *Zhejiang Univ, Hangzhou, China) (ISI Proc, WOS:000403212100048, IEEE) [A1'02], [A1'12]

35.           F. Gouadria, L. Sbita, N. Sigrimis, Comparison between self-tuning fuzzy PID and classic PID controllers for greenhouse system, in Proc. Int. Conf. on Green Energy Conversion Systems (GECS 2017), Hammamet, Tunisia, ISBN 978-1-5090-6287-4, pp. 1-6, Mar. 2017. 10.1109/GECS.2017.8066169 (Univ of Gabes, Tunisia; Agricultural Univ of Athens, Athens, Greece) (ISI Proc, WOS:000413691500050, IEEE) [A3'14]

36.           F. Gouadria, L. Sbita, N. Sigrimis, A greenhouse system control based on a PSO tuned PI regulator, in Proc. Int. Conf. on Green Energy Conversion Systems (GECS 2017), Hammamet, Tunisia, ISBN 978-1-5090-6287-4, pp. 1-5, Mar. 2017. 10.1109/GECS.2017.8066235 (Univ of Gabes, Tunisia; Agricultural Univ of Athens, Athens, Greece) (ISI Proc, WOS:000413691500116, IEEE) [A3'14]

37.           F. Gouadria, L. Sbita, N. Sigrimis, Super-twisting algorithm devoted to control the greenhouse system, in Proc. Int. Conf. on Green Energy Conversion Systems (GECS 2017), Hammamet, Tunisia, ISBN 978-1-5090-6287-4, pp. 1-5, Mar. 2017. 10.1109/GECS.2017.8066154 (Univ of Gabes, Tunisia; Agricultural Univ of Athens, Athens, Greece) (ISI Proc, WOS:000413691500035, IEEE) [A4'12], [A3'14]

38.           D.O. Kisck, D.S. Anghel, M. Kisck, Rotor-flux model for sensorless vector-control of super-high-speed IPMSM, in Proc. 10th Int. Symposium on Advanced Topics in Electrical Engineering (ATEE 2017), Bucharest, Romania, ISBN 978-1-5090-5160-1, ISSN 1843-8571, pp. 132-137, Mar. 2017, 10.1109/ATEE.2017.7905143 (Univ Politehnica of Bucharest, Romania; Cygnus Comp, Bucharest, Romania) (ISI Proc, WOS:000403399400027, IEEE) [A1'09]

39.           B. Zarei, S.A. Davari, Direct estimation of stator flux by a MRAS observer in sensorless application, in Proc. 8th Power Electronics, Drive Systems & Technologies Conf. (PEDSTC 2017), Mashhad, Iran, ISBN 978-1-5090-5766-5, ISSN 2377-6773, pp. 149-153, Feb. 2017, 10.1109/PEDSTC.2017.7910406 (Shahid Rajaee Teacher Training Univ, Tehran, Iran) (ISI Proc, WOS:000403399500026, IEEE) [A1'06]

40.           A. Aliaskari, S.A. Davari, A new closed-loop voltage model flux observer for sensorless DTC method, in Proc. 8th Power Electronics, Drive Systems & Technologies Conf. (PEDSTC 2017), Mashhad, Iran, ISBN 978-1-5090-5766-5, ISSN 2377-6773, pp. 149-153, Feb. 2017, 10.1109/PEDSTC.2017.7910405 (Shahid Rajaee Teacher Training Univ, Tehran, Iran) (ISI Proc, WOS:000403399500025, IEEE) [A1'06]

41.           X. Wang, C.S. Suh, Nonlinear time-frequency control of permanent magnet synchronous motors, in Proc. ASME International Mechanical Engineering Congress and Exposition (IMECE 2016), Phoenix, AZ, USA, ISBN 978-0-7918-5055-8, vol. 4B, Nov. 2016, 10.1115/IMECE2016-67363 (*Texas A&M Univ, TX, USA) (ISI Proc, WOS:000400806500040) [A2'10]

42.           S. Bolognani, L. Ortombina, F. Tinazzi, M. Zigliotto, Model sensitivity assessment for sensorless PM and reluctance motor drives, in Proc. 42nd Annual Conf. of the IEEE Industrial Electronics Society (IECON 2016), Florence, Italy, ISBN 978-1-5090-3474-1, ISSN 1553-572X, pp. 2851-2856, Oct. 2016, 10.1109/IECON.2016.7793841 (*Univ of Padova, Italy) (ISI Proc, WOS:000399031203021, IEEE) [A2'08]

43.           V. Manzolini, M. Morandin, S. Bolognani, D-axis polarity detection for IPM synchronous motor drives by high frequency voltage injection, in Proc. 42nd Annual Conf. of the IEEE Industrial Electronics Society (IECON 2016), Florence, Italy, ISBN 978-1-5090-3474-1, ISSN 1553-572X, pp. 4325-4330, Oct. 2016, 10.1109/IECON.2016.7793082 (*Univ of Padova, Italy) (ISI Proc, WOS:000399031204100, IEEE) [A2'08]

44.           L. Concari, A. Toscani, D. Baraterin, C. Concari, M. Degano, G. Pellegrino, Comparison of flux observers for sensorless control of permanent magnet assisted SynRel motors, in Proc. 42nd Annual Conf. of the IEEE Industrial Electronics Society (IECON 2016), Florence, Italy, ISBN 978-1-5090-3474-1, ISSN 1553-572X, pp. 2719-2724, Oct. 2016, 10.1109/IECON.2016.7793122 (Univ of Parma, Italy; *Univ of Nottingham, UK; Politecnico di Torino, Italy) (ISI Proc, WOS:000399031202165, IEEE) [A2'06]

45.           H. Tao, H. Ma, Y. Wei, Y. Li, L. Xu, A novel grid connection method for DFIG based on direct power control, in Proc. 13th IEEE Vehicle Power and Propulsion Conference (VPPC 2016), Hangzhou, China, ISBN 978-1-5090-3528-1, ISSN 1938-8756, Oct. 2016, 10.1109/VPPC.2016.7791584 (Beijing Inst. Technol, China; *Tsinghua Univ, Beijing, China) (ISI Proc, WOS:000391556500019, IEEE) [A3'06]

46.           D.H. Wang, Preliminary investigation of a novel hybrid radial and axial magnetic circuit PMSM with flux weakening capability, in Proc. 13th IEEE Vehicle Power and Propulsion Conference (VPPC 2016), Hangzhou, China, ISBN 978-1-5090-3528-1, ISSN 1938-8756, Oct. 2016, 10.1109/VPPC.2016.7791754